| Message ID | 1373987114-24009-1-git-send-email-b.brezillon@overkiz.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/16/2013 05:05 PM, Boris BREZILLON wrote: > Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to > avoid common clk framework warnings. > > Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> > --- This patch is part of a series and the recipients are also Thomas and John (clocksource maintainers). Is this patch going through Nicolas's tree or Thomas's tree ? Thanks -- Daniel > drivers/clocksource/tcb_clksrc.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c > index 8a61872..229c019 100644 > --- a/drivers/clocksource/tcb_clksrc.c > +++ b/drivers/clocksource/tcb_clksrc.c > @@ -100,7 +100,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) > || tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) { > __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR)); > __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR)); > - clk_disable(tcd->clk); > + clk_disable_unprepare(tcd->clk); > } > > switch (m) { > @@ -109,7 +109,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) > * of oneshot, we get lower overhead and improved accuracy. > */ > case CLOCK_EVT_MODE_PERIODIC: > - clk_enable(tcd->clk); > + clk_prepare_enable(tcd->clk); > > /* slow clock, count up to RC, then irq and restart */ > __raw_writel(timer_clock > @@ -126,7 +126,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) > break; > > case CLOCK_EVT_MODE_ONESHOT: > - clk_enable(tcd->clk); > + clk_prepare_enable(tcd->clk); > > /* slow clock, count up to RC, then irq and stop */ > __raw_writel(timer_clock | ATMEL_TC_CPCSTOP > @@ -275,7 +275,7 @@ static int __init tcb_clksrc_init(void) > pdev = tc->pdev; > > t0_clk = tc->clk[0]; > - clk_enable(t0_clk); > + clk_prepare_enable(t0_clk); > > /* How fast will we be counting? Pick something over 5 MHz. */ > rate = (u32) clk_get_rate(t0_clk); > @@ -313,7 +313,7 @@ static int __init tcb_clksrc_init(void) > /* tclib will give us three clocks no matter what the > * underlying platform supports. > */ > - clk_enable(tc->clk[1]); > + clk_prepare_enable(tc->clk[1]); > /* setup both channel 0 & 1 */ > tcb_setup_dual_chan(tc, best_divisor_idx); > } >
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 8a61872..229c019 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -100,7 +100,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) || tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) { __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR)); __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR)); - clk_disable(tcd->clk); + clk_disable_unprepare(tcd->clk); } switch (m) { @@ -109,7 +109,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) * of oneshot, we get lower overhead and improved accuracy. */ case CLOCK_EVT_MODE_PERIODIC: - clk_enable(tcd->clk); + clk_prepare_enable(tcd->clk); /* slow clock, count up to RC, then irq and restart */ __raw_writel(timer_clock @@ -126,7 +126,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) break; case CLOCK_EVT_MODE_ONESHOT: - clk_enable(tcd->clk); + clk_prepare_enable(tcd->clk); /* slow clock, count up to RC, then irq and stop */ __raw_writel(timer_clock | ATMEL_TC_CPCSTOP @@ -275,7 +275,7 @@ static int __init tcb_clksrc_init(void) pdev = tc->pdev; t0_clk = tc->clk[0]; - clk_enable(t0_clk); + clk_prepare_enable(t0_clk); /* How fast will we be counting? Pick something over 5 MHz. */ rate = (u32) clk_get_rate(t0_clk); @@ -313,7 +313,7 @@ static int __init tcb_clksrc_init(void) /* tclib will give us three clocks no matter what the * underlying platform supports. */ - clk_enable(tc->clk[1]); + clk_prepare_enable(tc->clk[1]); /* setup both channel 0 & 1 */ tcb_setup_dual_chan(tc, best_divisor_idx); }
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> --- drivers/clocksource/tcb_clksrc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)