diff mbox

[4/6] ARM: dts: omap5-uevm: Use reset-gpio driver for hsusb2_reset

Message ID 1374137590-17865-5-git-send-email-rogerq@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Roger Quadros July 18, 2013, 8:53 a.m. UTC 
We no longer need to model a RESET line as a regulator since
we have the reset-gpio driver available.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/omap5-uevm.dts |   17 ++++++++---------
 1 files changed, 8 insertions(+), 9 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..08650f9 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -28,20 +28,19 @@ 
 	};
 
 	/* HS USB Port 2 RESET */
-	hsusb2_reset: hsusb2_reset_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
-		startup-delay-us = <70000>;
-		enable-active-high;
+	hsusb2_reset: hsusb2_reset {
+		compatible = "gpio-reset";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+		reset-delay-us = <70000>;
+		initially-in-reset;
+		#reset-cells = <0>;
 	};
 
 	/* HS USB Host PHY on PORT 2 */
 	hsusb2_phy: hsusb2_phy {
 		compatible = "usb-nop-xceiv";
-		reset-supply = <&hsusb2_reset>;
+		resets = <&hsusb2_reset>;
+		reset_names = "reset";
 	/**
 	  * FIXME
 	  * Put the right clock phandle here when available