diff mbox

[v6] watchdog: Add MOXA ART watchdog driver

Message ID 1375098093-8975-1-git-send-email-jonas.jensen@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jonas Jensen July 29, 2013, 11:41 a.m. UTC 
Add watchdog driver for MOXA ART SoCs.

Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
---

Notes:
    Changes since v5:
    
    1. replace "moxart_wdt->dev.timeout" with "wdt_dev->timeout"
    
    Applies to next-20130729

 .../bindings/watchdog/moxa,moxart-watchdog.txt     |  15 ++
 drivers/watchdog/Kconfig                           |  10 ++
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/moxart_wdt.c                      | 165 +++++++++++++++++++++
 4 files changed, 191 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
 create mode 100644 drivers/watchdog/moxart_wdt.c

Comments

Guenter Roeck July 29, 2013, 11:57 a.m. UTC | #1 
On 07/29/2013 04:41 AM, Jonas Jensen wrote:
> Add watchdog driver for MOXA ART SoCs.
>
> Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
> ---
>
> Notes:
>      Changes since v5:
>
>      1. replace "moxart_wdt->dev.timeout" with "wdt_dev->timeout"
>
>      Applies to next-20130729
>
>   .../bindings/watchdog/moxa,moxart-watchdog.txt     |  15 ++
>   drivers/watchdog/Kconfig                           |  10 ++
>   drivers/watchdog/Makefile                          |   1 +
>   drivers/watchdog/moxart_wdt.c                      | 165 +++++++++++++++++++++
>   4 files changed, 191 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
>   create mode 100644 drivers/watchdog/moxart_wdt.c
>
> diff --git a/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
> new file mode 100644
> index 0000000..1169857
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
> @@ -0,0 +1,15 @@
> +MOXA ART Watchdog timer
> +
> +Required properties:
> +
> +- compatible : Must be "moxa,moxart-watchdog"
> +- reg : Should contain registers location and length
> +- clocks : Should contain phandle for the clock that drives the counter
> +
> +Example:
> +
> +	watchdog: watchdog@98500000 {
> +		compatible = "moxa,moxart-watchdog";
> +		reg = <0x98500000 0x10>;
> +		clocks = <&coreclk>;
> +	};
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 362085d..6883aab 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -382,6 +382,16 @@ config RETU_WATCHDOG
>   	  To compile this driver as a module, choose M here: the
>   	  module will be called retu_wdt.
>
> +config MOXART_WDT
> +	tristate "MOXART watchdog"
> +	depends on ARCH_MOXART
> +	help
> +	  Say Y here to include Watchdog timer support for the watchdog
> +	  existing on the MOXA ART SoC series platforms.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called moxart_wdt.
> +
>   # AVR32 Architecture
>
>   config AT32AP700X_WDT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 2f26a0b..7cab53a 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -54,6 +54,7 @@ obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
>   obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
>   obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
>   obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
> +obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
>
>   # AVR32 Architecture
>   obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
> diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c
> new file mode 100644
> index 0000000..70b5806
> --- /dev/null
> +++ b/drivers/watchdog/moxart_wdt.c
> @@ -0,0 +1,165 @@
> +/*
> + * MOXA ART SoCs watchdog driver.
> + *
> + * Copyright (C) 2013 Jonas Jensen
> + *
> + * Jonas Jensen <jonas.jensen@gmail.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +#include <linux/moduleparam.h>
> +
> +#define REG_COUNT			0x4
> +#define REG_MODE			0x8
> +#define REG_ENABLE			0xC
> +
> +struct moxart_wdt_dev {
> +	struct watchdog_device dev;
> +	void __iomem *base;
> +	unsigned int clock_frequency;
> +};
> +
> +static int heartbeat;
> +
> +static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
> +{
> +	struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> +
> +	writel(0, moxart_wdt->base + REG_ENABLE);
> +
> +	return 0;
> +}
> +
> +static int moxart_wdt_start(struct watchdog_device *wdt_dev)
> +{
> +	struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
> +
> +	writel(moxart_wdt->clock_frequency * wdt_dev->timeout,
> +	       moxart_wdt->base + REG_COUNT);
> +	writel(0x5ab9, moxart_wdt->base + REG_MODE);
> +	writel(0x03, moxart_wdt->base + REG_ENABLE);
> +
> +	return 0;
> +}
> +
> +static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev,
> +				  unsigned int timeout)
> +{
> +	wdt_dev->timeout = timeout;
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_info moxart_wdt_info = {
> +	.identity       = "moxart-wdt",
> +	.options        = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> +			  WDIOF_MAGICCLOSE,
> +};
> +
> +static const struct watchdog_ops moxart_wdt_ops = {
> +	.owner          = THIS_MODULE,
> +	.start          = moxart_wdt_start,
> +	.stop           = moxart_wdt_stop,
> +	.set_timeout    = moxart_wdt_set_timeout,
> +};
> +
> +static int moxart_wdt_probe(struct platform_device *pdev)
> +{
> +	struct moxart_wdt_dev *moxart_wdt;
> +	struct device *dev = &pdev->dev;

I have my nitpicking day ;). Even though you declare dev = &pdev->dev,
you use &pdev->dev several times below.

Assuming you change this, feel free to add

Reviewed-by: Guenter Roeck <linux@roeck-us.net>


> +	struct device_node *node = dev->of_node;
> +	struct resource *res;
> +	struct clk *clk;
> +	int err;
> +	unsigned int max_timeout;
> +	bool nowayout = WATCHDOG_NOWAYOUT;
> +
> +	moxart_wdt = devm_kzalloc(&pdev->dev, sizeof(*moxart_wdt), GFP_KERNEL);
> +	if (!moxart_wdt)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, moxart_wdt);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	moxart_wdt->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(moxart_wdt->base))
> +		return PTR_ERR(moxart_wdt->base);
> +
> +	clk = of_clk_get(node, 0);
> +	if (IS_ERR(clk)) {
> +		pr_err("%s: of_clk_get failed\n", __func__);
> +		return PTR_ERR(clk);
> +	}
> +
> +	moxart_wdt->clock_frequency = clk_get_rate(clk);
> +	if (moxart_wdt->clock_frequency == 0) {
> +		pr_err("%s: incorrect clock frequency\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	max_timeout = UINT_MAX / moxart_wdt->clock_frequency;
> +
> +	moxart_wdt->dev.info = &moxart_wdt_info;
> +	moxart_wdt->dev.ops = &moxart_wdt_ops;
> +	moxart_wdt->dev.timeout = max_timeout;
> +	moxart_wdt->dev.min_timeout = 1;
> +	moxart_wdt->dev.max_timeout = max_timeout;
> +	moxart_wdt->dev.parent = &pdev->dev;
> +
> +	watchdog_init_timeout(&moxart_wdt->dev, heartbeat, &pdev->dev);
> +	watchdog_set_nowayout(&moxart_wdt->dev, nowayout);
> +
> +	watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt);
> +
> +	err = watchdog_register_device(&moxart_wdt->dev);
> +	if (unlikely(err))
> +		return err;
> +
> +	dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
> +		moxart_wdt->dev.timeout, nowayout);
> +
> +	return 0;
> +}
> +
> +static int moxart_wdt_remove(struct platform_device *pdev)
> +{
> +	struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
> +
> +	moxart_wdt_stop(&moxart_wdt->dev);
> +	watchdog_unregister_device(&moxart_wdt->dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id moxart_watchdog_match[] = {
> +	{ .compatible = "moxa,moxart-watchdog" },
> +	{ },
> +};
> +
> +static struct platform_driver moxart_wdt_driver = {
> +	.probe      = moxart_wdt_probe,
> +	.remove     = moxart_wdt_remove,
> +	.driver     = {
> +		.name		= "moxart-watchdog",
> +		.owner		= THIS_MODULE,
> +		.of_match_table	= moxart_watchdog_match,
> +	},
> +};
> +module_platform_driver(moxart_wdt_driver);
> +
> +module_param(heartbeat, int, 0);
> +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
> +
> +MODULE_DESCRIPTION("MOXART watchdog driver");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
new file mode 100644
index 0000000..1169857
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
@@ -0,0 +1,15 @@ 
+MOXA ART Watchdog timer
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-watchdog"
+- reg : Should contain registers location and length
+- clocks : Should contain phandle for the clock that drives the counter
+
+Example:
+
+	watchdog: watchdog@98500000 {
+		compatible = "moxa,moxart-watchdog";
+		reg = <0x98500000 0x10>;
+		clocks = <&coreclk>;
+	};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 362085d..6883aab 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -382,6 +382,16 @@  config RETU_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called retu_wdt.
 
+config MOXART_WDT
+	tristate "MOXART watchdog"
+	depends on ARCH_MOXART
+	help
+	  Say Y here to include Watchdog timer support for the watchdog
+	  existing on the MOXA ART SoC series platforms.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moxart_wdt.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2f26a0b..7cab53a 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -54,6 +54,7 @@  obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
 obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
 obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
 obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
+obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c
new file mode 100644
index 0000000..70b5806
--- /dev/null
+++ b/drivers/watchdog/moxart_wdt.c
@@ -0,0 +1,165 @@ 
+/*
+ * MOXA ART SoCs watchdog driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/moduleparam.h>
+
+#define REG_COUNT			0x4
+#define REG_MODE			0x8
+#define REG_ENABLE			0xC
+
+struct moxart_wdt_dev {
+	struct watchdog_device dev;
+	void __iomem *base;
+	unsigned int clock_frequency;
+};
+
+static int heartbeat;
+
+static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(0, moxart_wdt->base + REG_ENABLE);
+
+	return 0;
+}
+
+static int moxart_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(moxart_wdt->clock_frequency * wdt_dev->timeout,
+	       moxart_wdt->base + REG_COUNT);
+	writel(0x5ab9, moxart_wdt->base + REG_MODE);
+	writel(0x03, moxart_wdt->base + REG_ENABLE);
+
+	return 0;
+}
+
+static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int timeout)
+{
+	wdt_dev->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_info moxart_wdt_info = {
+	.identity       = "moxart-wdt",
+	.options        = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops moxart_wdt_ops = {
+	.owner          = THIS_MODULE,
+	.start          = moxart_wdt_start,
+	.stop           = moxart_wdt_stop,
+	.set_timeout    = moxart_wdt_set_timeout,
+};
+
+static int moxart_wdt_probe(struct platform_device *pdev)
+{
+	struct moxart_wdt_dev *moxart_wdt;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct resource *res;
+	struct clk *clk;
+	int err;
+	unsigned int max_timeout;
+	bool nowayout = WATCHDOG_NOWAYOUT;
+
+	moxart_wdt = devm_kzalloc(&pdev->dev, sizeof(*moxart_wdt), GFP_KERNEL);
+	if (!moxart_wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, moxart_wdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	moxart_wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(moxart_wdt->base))
+		return PTR_ERR(moxart_wdt->base);
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("%s: of_clk_get failed\n", __func__);
+		return PTR_ERR(clk);
+	}
+
+	moxart_wdt->clock_frequency = clk_get_rate(clk);
+	if (moxart_wdt->clock_frequency == 0) {
+		pr_err("%s: incorrect clock frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	max_timeout = UINT_MAX / moxart_wdt->clock_frequency;
+
+	moxart_wdt->dev.info = &moxart_wdt_info;
+	moxart_wdt->dev.ops = &moxart_wdt_ops;
+	moxart_wdt->dev.timeout = max_timeout;
+	moxart_wdt->dev.min_timeout = 1;
+	moxart_wdt->dev.max_timeout = max_timeout;
+	moxart_wdt->dev.parent = &pdev->dev;
+
+	watchdog_init_timeout(&moxart_wdt->dev, heartbeat, &pdev->dev);
+	watchdog_set_nowayout(&moxart_wdt->dev, nowayout);
+
+	watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt);
+
+	err = watchdog_register_device(&moxart_wdt->dev);
+	if (unlikely(err))
+		return err;
+
+	dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
+		moxart_wdt->dev.timeout, nowayout);
+
+	return 0;
+}
+
+static int moxart_wdt_remove(struct platform_device *pdev)
+{
+	struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
+
+	moxart_wdt_stop(&moxart_wdt->dev);
+	watchdog_unregister_device(&moxart_wdt->dev);
+
+	return 0;
+}
+
+static const struct of_device_id moxart_watchdog_match[] = {
+	{ .compatible = "moxa,moxart-watchdog" },
+	{ },
+};
+
+static struct platform_driver moxart_wdt_driver = {
+	.probe      = moxart_wdt_probe,
+	.remove     = moxart_wdt_remove,
+	.driver     = {
+		.name		= "moxart-watchdog",
+		.owner		= THIS_MODULE,
+		.of_match_table	= moxart_watchdog_match,
+	},
+};
+module_platform_driver(moxart_wdt_driver);
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
+
+MODULE_DESCRIPTION("MOXART watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");