diff mbox

ARM: sun7i: Add Cubieboard2 Device Tree

Message ID 1375610641-18807-1-git-send-email-maxime.ripard@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard Aug. 4, 2013, 10:04 a.m. UTC 
The Cubieboard2 is the successor of the first Cubieboard, and shares the
same hardware, except that the Allwinner A10 found initially has been
replaced by an Allwinner A20.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---

Hi,

This patch depends on the v3 of the patchset "ARM: sunxi: Introduce Allwinner A20
support" I sent previously.

 arch/arm/boot/dts/Makefile                  |  1 +
 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 53 +++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 18a7374..5d0f365 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -212,6 +212,7 @@  dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun6i-a31-colombus.dtb \
+	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-olinuxino-micro.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
new file mode 100644
index 0000000..31b76f0
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,53 @@ 
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		pinctrl@01c20800 {
+			led_pins_cubieboard2: led_pins@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard2>;
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 0>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+};