@@ -12,13 +12,13 @@
#include <linux/module.h>
#include <linux/reboot.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91rm9200.h>
-#include <mach/at91_pmc.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -20,7 +21,6 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -19,7 +20,6 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -18,7 +19,6 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
@@ -12,13 +12,13 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
@@ -8,12 +8,12 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9n12.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "board.h"
@@ -10,6 +10,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -19,7 +20,6 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
@@ -8,12 +8,12 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9x5.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "board.h"
@@ -24,9 +24,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of_address.h>
+#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include <asm/proc-fns.h>
@@ -19,13 +19,13 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
@@ -13,8 +13,8 @@
*/
#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
#include <mach/at91_ramc.h>
@@ -9,12 +9,12 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/sama5d3.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "soc.h"
@@ -11,6 +11,7 @@
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
@@ -18,7 +19,6 @@
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
#include "at91_shdwc.h"
#include "soc.h"
@@ -326,7 +326,7 @@ static int vbus_is_present(struct usba_udc *udc)
#if defined(CONFIG_ARCH_AT91SAM9RL)
-#include <mach/at91_pmc.h>
+#include <linux/clk/at91_pmc.h>
static void toggle_bias(int is_on)
{
similarity index 99%
rename from arch/arm/mach-at91/include/mach/at91_pmc.h
rename to include/linux/clk/at91_pmc.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91/include/mach/at91_pmc.h
+ * include/linux/clk/at91_pmc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
This patch moves at91_pmc.h header from machine specific directory (arch/arm/mach-at91/include/mach/at91_pmc.h) to clk include directory (include/linux/clk/at91_pmc.h). We need this to avoid reference to machine specific headers in clk drivers. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> --- arch/arm/mach-at91/at91rm9200.c | 2 +- arch/arm/mach-at91/at91sam9260.c | 2 +- arch/arm/mach-at91/at91sam9261.c | 2 +- arch/arm/mach-at91/at91sam9263.c | 2 +- arch/arm/mach-at91/at91sam9g45.c | 2 +- arch/arm/mach-at91/at91sam9n12.c | 2 +- arch/arm/mach-at91/at91sam9rl.c | 2 +- arch/arm/mach-at91/at91sam9x5.c | 2 +- arch/arm/mach-at91/clock.c | 2 +- arch/arm/mach-at91/pm.c | 2 +- arch/arm/mach-at91/pm_slowclock.S | 2 +- arch/arm/mach-at91/sama5d3.c | 2 +- arch/arm/mach-at91/setup.c | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 2 +- .../include/mach => include/linux/clk}/at91_pmc.h | 2 +- 15 files changed, 15 insertions(+), 15 deletions(-) rename {arch/arm/mach-at91/include/mach => include/linux/clk}/at91_pmc.h (99%)