diff mbox

[4/5] ARM64: Move copy_siginfo_to_user32 and copy_siginfo_from_user32 to signal.c to be able to use from non AARCH32 code.

Message ID 1378762380-13152-4-git-send-email-apinski@cavium.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andrew Pinski Sept. 9, 2013, 9:32 p.m. UTC 
The signal code for ILP32 uses one extra function from signal32.c; it does not make sense to enable the whole signal32.c code so we move the function which was being used to signal.c.


Signed-off-by: Andrew Pinski <apinski@cavium.com>
---
 arch/arm64/kernel/signal.c   |   85 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm64/kernel/signal32.c |   81 ----------------------------------------
 2 files changed, 85 insertions(+), 81 deletions(-)
diff mbox

Patch

diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index d97a0c0..5986b7f 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -249,3 +249,88 @@  asmlinkage void do_notify_resume(struct pt_regs *regs,
 		tracehook_notify_resume(regs);
 	}
 }
+
+
+#ifdef CONFIG_COMPAT
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
+{
+	int err;
+
+	if (!access_ok(VERIFY_WRITE, to, sizeof(*to)))
+		return -EFAULT;
+
+	/* If you change siginfo_t structure, please be sure
+	 * this code is fixed accordingly.
+	 * It should never copy any pad contained in the structure
+	 * to avoid security leaks, but must copy the generic
+	 * 3 ints plus the relevant union member.
+	 * This routine must convert siginfo from 64bit to 32bit as well
+	 * at the same time.
+	 */
+	err = __put_user(from->si_signo, &to->si_signo);
+	err |= __put_user(from->si_errno, &to->si_errno);
+	err |= __put_user((short)from->si_code, &to->si_code);
+	if (from->si_code < 0)
+		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad,
+				      SI_PAD_SIZE);
+	else switch (from->si_code & __SI_MASK) {
+	case __SI_KILL:
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		break;
+	case __SI_TIMER:
+		 err |= __put_user(from->si_tid, &to->si_tid);
+		 err |= __put_user(from->si_overrun, &to->si_overrun);
+		 err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr,
+				   &to->si_ptr);
+		break;
+	case __SI_POLL:
+		err |= __put_user(from->si_band, &to->si_band);
+		err |= __put_user(from->si_fd, &to->si_fd);
+		break;
+	case __SI_FAULT:
+		err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr,
+				  &to->si_addr);
+#ifdef BUS_MCEERR_AO
+		/*
+		 * Other callers might not initialize the si_lsb field,
+		 * so check explicitely for the right codes here.
+		 */
+		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
+#endif
+		break;
+	case __SI_CHLD:
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		err |= __put_user(from->si_status, &to->si_status);
+		err |= __put_user(from->si_utime, &to->si_utime);
+		err |= __put_user(from->si_stime, &to->si_stime);
+		break;
+	case __SI_RT: /* This is not generated by the kernel as of now. */
+	case __SI_MESGQ: /* But this is */
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr);
+		break;
+	default: /* this is just in case for now ... */
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		break;
+	}
+	return err;
+}
+
+int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
+{
+	memset(to, 0, sizeof *to);
+
+	if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
+	    copy_from_user(to->_sifields._pad,
+			   from->_sifields._pad, SI_PAD_SIZE))
+		return -EFAULT;
+
+	return 0;
+}
+#endif
+
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index e393174..dadcb6c 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -150,87 +150,6 @@  static inline int get_sigset_t(sigset_t *set,
 	return 0;
 }
 
-int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
-{
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, to, sizeof(*to)))
-		return -EFAULT;
-
-	/* If you change siginfo_t structure, please be sure
-	 * this code is fixed accordingly.
-	 * It should never copy any pad contained in the structure
-	 * to avoid security leaks, but must copy the generic
-	 * 3 ints plus the relevant union member.
-	 * This routine must convert siginfo from 64bit to 32bit as well
-	 * at the same time.
-	 */
-	err = __put_user(from->si_signo, &to->si_signo);
-	err |= __put_user(from->si_errno, &to->si_errno);
-	err |= __put_user((short)from->si_code, &to->si_code);
-	if (from->si_code < 0)
-		err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad,
-				      SI_PAD_SIZE);
-	else switch (from->si_code & __SI_MASK) {
-	case __SI_KILL:
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		break;
-	case __SI_TIMER:
-		 err |= __put_user(from->si_tid, &to->si_tid);
-		 err |= __put_user(from->si_overrun, &to->si_overrun);
-		 err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr,
-				   &to->si_ptr);
-		break;
-	case __SI_POLL:
-		err |= __put_user(from->si_band, &to->si_band);
-		err |= __put_user(from->si_fd, &to->si_fd);
-		break;
-	case __SI_FAULT:
-		err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr,
-				  &to->si_addr);
-#ifdef BUS_MCEERR_AO
-		/*
-		 * Other callers might not initialize the si_lsb field,
-		 * so check explicitely for the right codes here.
-		 */
-		if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
-			err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
-#endif
-		break;
-	case __SI_CHLD:
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user(from->si_status, &to->si_status);
-		err |= __put_user(from->si_utime, &to->si_utime);
-		err |= __put_user(from->si_stime, &to->si_stime);
-		break;
-	case __SI_RT: /* This is not generated by the kernel as of now. */
-	case __SI_MESGQ: /* But this is */
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr);
-		break;
-	default: /* this is just in case for now ... */
-		err |= __put_user(from->si_pid, &to->si_pid);
-		err |= __put_user(from->si_uid, &to->si_uid);
-		break;
-	}
-	return err;
-}
-
-int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
-{
-	memset(to, 0, sizeof *to);
-
-	if (copy_from_user(to, from, __ARCH_SI_PREAMBLE_SIZE) ||
-	    copy_from_user(to->_sifields._pad,
-			   from->_sifields._pad, SI_PAD_SIZE))
-		return -EFAULT;
-
-	return 0;
-}
-
 /*
  * VFP save/restore code.
  */