diff mbox

at91: serial: fix wrong pinctrl_usart2_rts

Message ID 1379593719-9337-1-git-send-email-jiri.prchal@aksignal.cz (mailing list archive)
State New, archived
Headers show

Commit Message

Jiri Prchal Sept. 19, 2013, 12:28 p.m. UTC
Replace pinctrl_usart2_rts and pinctrl_usart2_cts istead of pinctrl_uart2_*.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
---
 arch/arm/boot/dts/at91sam9x5.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Nicolas Ferre Sept. 19, 2013, 12:44 p.m. UTC | #1
On 19/09/2013 14:28, Jiri Prchal :
> Replace pinctrl_usart2_rts and pinctrl_usart2_cts istead of pinctrl_uart2_*.
>
> Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Thanks Jiri.

> ---
>   arch/arm/boot/dts/at91sam9x5.dtsi |    4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index c5d26b0..2d674d7 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -190,12 +190,12 @@
>   							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
>   					};
>
> -					pinctrl_uart2_rts: uart2_rts-0 {
> +					pinctrl_usart2_rts: usart2_rts-0 {
>   						atmel,pins =
>   							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
>   					};
>
> -					pinctrl_uart2_cts: uart2_cts-0 {
> +					pinctrl_usart2_cts: usart2_cts-0 {
>   						atmel,pins =
>   							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
>   					};
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index c5d26b0..2d674d7 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -190,12 +190,12 @@ 
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};