diff mbox

[RESEND,v5,2/2] PXA: add PWM nodes to pxa27x.dtsi

Message ID 1379791174-2369-3-git-send-email-mikedunn@newsguy.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mike Dunn Sept. 21, 2013, 7:19 p.m. UTC
This patch adds PWM nodes for each of the four channels present on the
pxa270.

Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
---
 arch/arm/boot/dts/pxa27x.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index d7c5d72..a705469 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -10,5 +10,29 @@ 
 			marvell,intc-priority;
 			marvell,intc-nr-irqs = <34>;
 		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+		};
 	};
 };