[v2] ARM: dts: add initial VF610 Cosmic/Cosmic+ board support

Commit Message

Matt Porter Sept. 23, 2013, 3:14 p.m. UTC

Add initial PHYTEC VF610 Cosmic/Cosmic+ board support with
UART and FEC enabled.

Signed-off-by: Matt Porter <[e-mail]>
---
Changes since v1:
	- Add #clocks to the enet clock to comply with fixed-clock binding
	- Peripheral nodes in alphabetical order

 arch/arm/boot/dts/Makefile         |  1 +
 arch/arm/boot/dts/vf610-cosmic.dts | 47 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610-cosmic.dts

Comments

Shawn Guo Sept. 24, 2013, 2:33 p.m. UTC | #1

On Mon, Sep 23, 2013 at 11:14:44AM -0400, Matt Porter wrote:
> Add initial PHYTEC VF610 Cosmic/Cosmic+ board support with
> UART and FEC enabled.
> 
> Signed-off-by: Matt Porter <[e-mail]>

Applied, thanks.

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cc0f1fb..b0d6156 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -142,6 +142,7 @@  dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sbc6x.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
new file mode 100644
index 0000000..c42e4f9
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -0,0 +1,47 @@ 
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1_1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};