diff mbox

[4/7] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception

Message ID 1380035221-11576-5-git-send-email-andreas.herrmann@calxeda.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andreas Herrmann Sept. 24, 2013, 3:06 p.m. UTC
With the right (or wrong;-) definition of v1 SMMU node in DTB it is
possible to trigger a division by zero in arm_smmu_init_domain_context
(if number of context irqs is 0):

       if (smmu->version == 1) {
               root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
 ?             root_cfg->irptndx %= smmu->num_context_irqs;
       } else {

Avoid this by checking for num_context_irqs > 0 before trying to
assign interrupts to contexts.

Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
---
 drivers/iommu/arm-smmu.c |   31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

Comments

Will Deacon Sept. 24, 2013, 3:40 p.m. UTC | #1
On Tue, Sep 24, 2013 at 04:06:58PM +0100, Andreas Herrmann wrote:
> With the right (or wrong;-) definition of v1 SMMU node in DTB it is
> possible to trigger a division by zero in arm_smmu_init_domain_context
> (if number of context irqs is 0):
> 
>        if (smmu->version == 1) {
>                root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
>  ?             root_cfg->irptndx %= smmu->num_context_irqs;
>        } else {
> 
> Avoid this by checking for num_context_irqs > 0 before trying to
> assign interrupts to contexts.
> 
> Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
> ---
>  drivers/iommu/arm-smmu.c |   31 +++++++++++++++++--------------
>  1 file changed, 17 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index f5a856e..0dfd255 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -828,21 +828,24 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
>  		return ret;
>  
>  	root_cfg->cbndx = ret;
> -	if (smmu->version == 1) {
> -		root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
> -		root_cfg->irptndx %= smmu->num_context_irqs;
> -	} else {
> -		root_cfg->irptndx = root_cfg->cbndx;
> -	}
>  
> -	irq = smmu->irqs[smmu->num_global_irqs + root_cfg->irptndx];
> -	ret = request_irq(irq, arm_smmu_context_fault, IRQF_SHARED,
> -			  "arm-smmu-context-fault", domain);
> -	if (IS_ERR_VALUE(ret)) {
> -		dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
> -			root_cfg->irptndx, irq);
> -		root_cfg->irptndx = -1;
> -		goto out_free_context;
> +	if (smmu->num_context_irqs) {

Can we move this check to probe time, to avoid re-evaluating it every time
we initialise a new domain?

Will
Andreas Herrmann Sept. 25, 2013, 10:50 a.m. UTC | #2
On Tue, Sep 24, 2013 at 11:40:48AM -0400, Will Deacon wrote:
> On Tue, Sep 24, 2013 at 04:06:58PM +0100, Andreas Herrmann wrote:
> > With the right (or wrong;-) definition of v1 SMMU node in DTB it is
> > possible to trigger a division by zero in arm_smmu_init_domain_context
> > (if number of context irqs is 0):
> > 
> >        if (smmu->version == 1) {
> >                root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
> >  ?             root_cfg->irptndx %= smmu->num_context_irqs;
> >        } else {
> > 
> > Avoid this by checking for num_context_irqs > 0 before trying to
> > assign interrupts to contexts.
> > 
> > Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
> > ---
> >  drivers/iommu/arm-smmu.c |   31 +++++++++++++++++--------------
> >  1 file changed, 17 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> > index f5a856e..0dfd255 100644
> > --- a/drivers/iommu/arm-smmu.c
> > +++ b/drivers/iommu/arm-smmu.c
> > @@ -828,21 +828,24 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
> >  		return ret;
> >  
> >  	root_cfg->cbndx = ret;
> > -	if (smmu->version == 1) {
> > -		root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
> > -		root_cfg->irptndx %= smmu->num_context_irqs;
> > -	} else {
> > -		root_cfg->irptndx = root_cfg->cbndx;
> > -	}
> >  
> > -	irq = smmu->irqs[smmu->num_global_irqs + root_cfg->irptndx];
> > -	ret = request_irq(irq, arm_smmu_context_fault, IRQF_SHARED,
> > -			  "arm-smmu-context-fault", domain);
> > -	if (IS_ERR_VALUE(ret)) {
> > -		dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
> > -			root_cfg->irptndx, irq);
> > -		root_cfg->irptndx = -1;
> > -		goto out_free_context;
> > +	if (smmu->num_context_irqs) {
> 
> Can we move this check to probe time, to avoid re-evaluating it every time
> we initialise a new domain?

Yes, I'll move this check and issue an error message when there is not
at least one context interrupt available.

Andreas
diff mbox

Patch

diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index f5a856e..0dfd255 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -828,21 +828,24 @@  static int arm_smmu_init_domain_context(struct iommu_domain *domain,
 		return ret;
 
 	root_cfg->cbndx = ret;
-	if (smmu->version == 1) {
-		root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
-		root_cfg->irptndx %= smmu->num_context_irqs;
-	} else {
-		root_cfg->irptndx = root_cfg->cbndx;
-	}
 
-	irq = smmu->irqs[smmu->num_global_irqs + root_cfg->irptndx];
-	ret = request_irq(irq, arm_smmu_context_fault, IRQF_SHARED,
-			  "arm-smmu-context-fault", domain);
-	if (IS_ERR_VALUE(ret)) {
-		dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
-			root_cfg->irptndx, irq);
-		root_cfg->irptndx = -1;
-		goto out_free_context;
+	if (smmu->num_context_irqs) {
+		if (smmu->version == 1) {
+			root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
+			root_cfg->irptndx %= smmu->num_context_irqs;
+		} else {
+			root_cfg->irptndx = root_cfg->cbndx;
+		}
+
+		irq = smmu->irqs[smmu->num_global_irqs + root_cfg->irptndx];
+		ret = request_irq(irq, arm_smmu_context_fault, IRQF_SHARED,
+				"arm-smmu-context-fault", domain);
+		if (IS_ERR_VALUE(ret)) {
+			dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
+				root_cfg->irptndx, irq);
+			root_cfg->irptndx = -1;
+			goto out_free_context;
+		}
 	}
 
 	root_cfg->smmu = smmu;