| Message ID | 1380281710-12728-1-git-send-email-balajitk@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Balaji, On 27/09/2013 13:35, Balaji T K wrote: > pinmux_emmc_pins: mux mode for cmd line should be MODE2 > to detect eMMC on beagle bone black and beagle bone white + eMMC cape. > > Signed-off-by: Balaji T K <balajitk@ti.com> > Tested-by: Felipe Balbi <balbi@ti.com> > --- > based on git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts > > arch/arm/boot/dts/am335x-bone-common.dtsi | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi > index ff5c3ca..51f6a99 100644 > --- a/arch/arm/boot/dts/am335x-bone-common.dtsi > +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi > @@ -153,7 +153,7 @@ > emmc_pins: pinmux_emmc_pins { > pinctrl-single,pins = < > 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ > - 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */ > + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ > 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ > 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ > 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ > Thanks, I'll apply it for 3.13. Regards, Benoit
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index ff5c3ca..51f6a99 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -153,7 +153,7 @@ emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */