@@ -317,6 +317,7 @@ config ARCH_INTEGRATOR
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select SPARSE_IRQ
+ select USE_OF
select VERSATILE_FPGA_IRQ
help
Support for ARM's Integrator platform.
@@ -34,63 +34,6 @@
#include "common.h"
-#ifdef CONFIG_ATAGS
-
-#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
-#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
-#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
-#define KMI0_IRQ { IRQ_KMIINT0 }
-#define KMI1_IRQ { IRQ_KMIINT1 }
-
-static AMBA_APB_DEVICE(rtc, "rtc", 0,
- INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart0, "uart0", 0,
- INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart1, "uart1", 0,
- INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL);
-
-static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
- &rtc_device,
- &uart0_device,
- &uart1_device,
- &kmi0_device,
- &kmi1_device,
-};
-
-int __init integrator_init(bool is_cp)
-{
- int i;
-
- /*
- * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
- * hard-code them. The Integator/CP and forward have proper cell IDs.
- * Else we leave them undefined to the bus driver can autoprobe them.
- */
- if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
- rtc_device.periphid = 0x00041030;
- uart0_device.periphid = 0x00041010;
- uart1_device.periphid = 0x00041010;
- kmi0_device.periphid = 0x00041050;
- kmi1_device.periphid = 0x00041050;
- uart0_device.dev.platform_data = &ap_uart_data;
- uart1_device.dev.platform_data = &ap_uart_data;
- }
-
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
- struct amba_device *d = amba_devs[i];
- amba_device_register(d, &iomem_resource);
- }
-
- return 0;
-}
-
-#endif
-
static DEFINE_RAW_SPINLOCK(cm_lock);
/**
@@ -402,8 +402,6 @@ void __init ap_init_early(void)
{
}
-#ifdef CONFIG_OF
-
static void __init ap_of_timer_init(void)
{
struct device_node *node;
@@ -564,136 +562,3 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
.restart = integrator_restart,
.dt_compat = ap_dt_board_compat,
MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc ap_io_desc_atag[] __initdata = {
- {
- .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- },
-};
-
-static void __init ap_map_io_atag(void)
-{
- iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
- ap_map_io();
-}
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-static struct platform_device pci_v3_device = {
- .name = "pci-v3",
- .id = 0,
-};
-
-static struct resource cfi_flash_resource = {
- .start = INTEGRATOR_FLASH_BASE,
- .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ap_flash_data,
- },
- .num_resources = 1,
- .resource = &cfi_flash_resource,
-};
-
-static void __init ap_timer_init(void)
-{
- struct clk *clk;
- unsigned long rate;
-
- clk = clk_get_sys("ap_timer", NULL);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
-
- writel(0, TIMER0_VA_BASE + TIMER_CTRL);
- writel(0, TIMER1_VA_BASE + TIMER_CTRL);
- writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
- integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
- integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
- IRQ_TIMERINT1);
-}
-
-#define INTEGRATOR_SC_VALID_INT 0x003fffff
-
-static void __init ap_init_irq(void)
-{
- /* Disable all interrupts initially. */
- /* Do the core module ones */
- writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
- /* do the header card stuff next */
- writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
- writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
- fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
- -1, INTEGRATOR_SC_VALID_INT, NULL);
- integrator_clk_init(false);
-}
-
-static void __init ap_init(void)
-{
- unsigned long sc_dec;
- int i;
-
- platform_device_register(&pci_v3_device);
- platform_device_register(&cfi_flash_device);
-
- ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
- sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
- for (i = 0; i < 4; i++) {
- struct lm_device *lmdev;
-
- if ((sc_dec & (16 << i)) == 0)
- continue;
-
- lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
- if (!lmdev)
- continue;
-
- lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
- lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
- lmdev->resource.flags = IORESOURCE_MEM;
- lmdev->irq = IRQ_AP_EXPINT0 + i;
- lmdev->id = i;
-
- lm_device_register(lmdev);
- }
-
- integrator_init(false);
-}
-
-MACHINE_START(INTEGRATOR, "ARM-Integrator")
- /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .atag_offset = 0x100,
- .reserve = integrator_reserve,
- .map_io = ap_map_io_atag,
- .init_early = ap_init_early,
- .init_irq = ap_init_irq,
- .handle_irq = fpga_handle_irq,
- .init_time = ap_timer_init,
- .init_machine = ap_init,
- .restart = integrator_restart,
-MACHINE_END
-
-#endif
@@ -249,7 +249,6 @@ static void __init intcp_init_early(void)
#endif
}
-#ifdef CONFIG_OF
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
@@ -354,175 +353,3 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
MACHINE_END
-
-#endif
-
-#ifdef CONFIG_ATAGS
-
-/*
- * For the ATAG boot some static mappings are needed. This will
- * go away with the ATAG support down the road.
- */
-
-static struct map_desc intcp_io_desc_atag[] __initdata = {
- {
- .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- },
-};
-
-static void __init intcp_map_io_atag(void)
-{
- iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
- intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
- intcp_map_io();
-}
-
-
-/*
- * This is where non-devicetree initialization code is collected and stashed
- * for eventual deletion.
- */
-
-#define INTCP_FLASH_SIZE SZ_32M
-
-static struct resource intcp_flash_resource = {
- .start = INTCP_PA_FLASH_BASE,
- .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &intcp_flash_data,
- },
- .num_resources = 1,
- .resource = &intcp_flash_resource,
-};
-
-#define INTCP_ETH_SIZE 0x10
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = INTEGRATOR_CP_ETH_BASE,
- .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CP_ETHINT,
- .end = IRQ_CP_ETHINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
- &intcp_flash_device,
- &smc91x_device,
-};
-
-#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE)
-
-static void __init intcp_init_irq(void)
-{
- u32 pic_mask, cic_mask, sic_mask;
-
- /* These masks are for the HW IRQ registers */
- pic_mask = ~((~0u) << (11 - 0));
- pic_mask |= (~((~0u) << (29 - 22))) << 22;
- cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
- sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
- /*
- * Disable all interrupt sources
- */
- writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
- writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
- writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
- writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
- writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
- writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
- fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
- -1, pic_mask, NULL);
-
- fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
- -1, cic_mask, NULL);
-
- fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
- IRQ_CP_CPPLDINT, sic_mask, NULL);
-
- integrator_clk_init(true);
-}
-
-#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-
-static void __init cp_timer_init(void)
-{
- writel(0, TIMER0_VA_BASE + TIMER_CTRL);
- writel(0, TIMER1_VA_BASE + TIMER_CTRL);
- writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
- sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
- sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
-}
-
-#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
- INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
- INTEGRATOR_CP_AACI_IRQS, NULL);
-
-static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
- { IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
- &mmc_device,
- &aaci_device,
- &clcd_device,
-};
-
-static void __init intcp_init(void)
-{
- int i;
-
- platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
-
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
- struct amba_device *d = amba_devs[i];
- amba_device_register(d, &iomem_resource);
- }
- integrator_init(true);
-}
-
-MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
- /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .atag_offset = 0x100,
- .reserve = integrator_reserve,
- .map_io = intcp_map_io_atag,
- .init_early = intcp_init_early,
- .init_irq = intcp_init_irq,
- .handle_irq = fpga_handle_irq,
- .init_time = cp_timer_init,
- .init_machine = intcp_init,
- .restart = integrator_restart,
-MACHINE_END
-
-#endif
@@ -809,32 +809,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
return pci_common_swizzle(dev, pinp);
}
-static int irq_tab[4] __initdata = {
- IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3
-};
-
-/*
- * map the specified device/slot/pin to an IRQ. This works out such
- * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
- */
-static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int intnr = ((slot - 9) + (pin - 1)) & 3;
-
- return irq_tab[intnr];
-}
-
-static struct hw_pci pci_v3 __initdata = {
- .swizzle = pci_v3_swizzle,
- .setup = pci_v3_setup,
- .nr_controllers = 1,
- .ops = &pci_v3_ops,
- .preinit = pci_v3_preinit,
- .postinit = pci_v3_postinit,
-};
-
-#ifdef CONFIG_OF
-
static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct of_irq oirq;
@@ -851,14 +825,36 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
oirq.size);
}
-static int __init pci_v3_dtprobe(struct platform_device *pdev,
- struct device_node *np)
+static struct hw_pci pci_v3 __initdata = {
+ .swizzle = pci_v3_swizzle,
+ .setup = pci_v3_setup,
+ .nr_controllers = 1,
+ .ops = &pci_v3_ops,
+ .preinit = pci_v3_preinit,
+ .postinit = pci_v3_postinit,
+};
+
+static int __init pci_v3_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct of_pci_range_parser parser;
struct of_pci_range range;
struct resource *res;
int irq, ret;
+ /* Remap the Integrator system controller */
+ ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+ if (!ap_syscon_base) {
+ dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
+ return -ENODEV;
+ }
+
+ /* Device tree probe path */
+ if (!np) {
+ dev_err(&pdev->dev, "no device tree node for PCIv3\n");
+ return -ENODEV;
+ }
+
if (of_pci_range_parser_init(&parser, np))
return -EINVAL;
@@ -925,76 +921,6 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev,
return 0;
}
-#else
-
-static inline int pci_v3_dtprobe(struct platform_device *pdev,
- struct device_node *np)
-{
- return -EINVAL;
-}
-
-#endif
-
-static int __init pci_v3_probe(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- int ret;
-
- /* Remap the Integrator system controller */
- ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
- if (!ap_syscon_base) {
- dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
- return -ENODEV;
- }
-
- /* Device tree probe path */
- if (np)
- return pci_v3_dtprobe(pdev, np);
-
- pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K);
- if (!pci_v3_base) {
- dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
- return -ENODEV;
- }
-
- ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL);
- if (ret) {
- dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n",
- ret);
- return -ENODEV;
- }
-
- conf_mem.name = "PCIv3 config";
- conf_mem.start = PHYS_PCI_CONFIG_BASE;
- conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1;
- conf_mem.flags = IORESOURCE_MEM;
-
- io_mem.name = "PCIv3 I/O";
- io_mem.start = PHYS_PCI_IO_BASE;
- io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1;
- io_mem.flags = IORESOURCE_MEM;
-
- non_mem_pci = 0x00000000;
- non_mem_pci_sz = SZ_256M;
- non_mem.name = "PCIv3 non-prefetched mem";
- non_mem.start = PHYS_PCI_MEM_BASE;
- non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1;
- non_mem.flags = IORESOURCE_MEM;
-
- pre_mem_pci = 0x10000000;
- pre_mem_pci_sz = SZ_256M;
- pre_mem.name = "PCIv3 prefetched mem";
- pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M;
- pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1;
- pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
- pci_v3.map_irq = pci_v3_map_irq;
-
- pci_common_init_dev(&pdev->dev, &pci_v3);
-
- return 0;
-}
-
static const struct of_device_id pci_ids[] = {
{ .compatible = "v3,v360epc-pci", },
{},
The Device Tree boot path now supports everything the ATAG boot can provide, and the two are equivalent. This deletes the ATAG boot path from the Integrator/AP and Integrator/CP platforms to move them on to the future. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/Kconfig | 1 + arch/arm/mach-integrator/core.c | 57 ---------- arch/arm/mach-integrator/integrator_ap.c | 135 ------------------------ arch/arm/mach-integrator/integrator_cp.c | 173 ------------------------------- arch/arm/mach-integrator/pci_v3.c | 122 +++++----------------- 5 files changed, 25 insertions(+), 463 deletions(-)