@@ -1 +1,2 @@
obj-$(CONFIG_RESET_CONTROLLER) += core.o
+obj-$(CONFIG_ARCH_SUNXI) += reset-sun6i.o
new file mode 100644
@@ -0,0 +1,156 @@
+/*
+ * Allwinner SoCs Reset Controller driver
+ *
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+struct sunxi_reset_data {
+ void __iomem *membase;
+ struct reset_controller_dev rcdev;
+};
+
+static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sunxi_reset_data *data = container_of(rcdev,
+ struct sunxi_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ u32 reg = readl(data->membase + (bank * 4));
+
+ writel(reg & ~BIT(offset), data->membase + (bank * 4));
+
+ return 0;
+}
+
+static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sunxi_reset_data *data = container_of(rcdev,
+ struct sunxi_reset_data,
+ rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ u32 reg = readl(data->membase + (bank * 4));
+
+ writel(reg | BIT(offset), data->membase + (bank * 4));
+
+ return 0;
+}
+
+static struct reset_control_ops sunxi_reset_ops = {
+ .assert = sunxi_reset_assert,
+ .deassert = sunxi_reset_deassert,
+};
+
+static int sunxi_reset_init(struct device_node *np)
+{
+ struct sunxi_reset_data *data;
+ struct resource res;
+ resource_size_t size;
+ int ret;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ goto err_alloc;
+
+ size = resource_size(&res);
+ data->membase = ioremap(res.start, size);
+ if (!data->membase) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = size * 32;
+ data->rcdev.ops = &sunxi_reset_ops;
+ data->rcdev.of_node = np;
+ reset_controller_register(&data->rcdev);
+
+ return 0;
+
+err_alloc:
+ kfree(data);
+ return ret;
+};
+
+/*
+ * These are the reset controller we need to initialize early on in
+ * our system, before we can even think of using a regular device
+ * driver for it.
+ */
+static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = {
+ { .compatible = "allwinner,sun6i-a31-ahb1-reset", },
+ { /* sentinel */ },
+};
+
+void __init sun6i_reset_init(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, sunxi_early_reset_dt_ids)
+ sunxi_reset_init(np);
+}
+
+/*
+ * And these are the controllers we can register through the regular
+ * device model.
+ */
+static const struct of_device_id sunxi_reset_dt_ids[] = {
+ { .compatible = "allwinner,sun4i-clock-reset", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids);
+
+static int sunxi_reset_probe(struct platform_device *pdev)
+{
+ return sunxi_reset_init(pdev->dev.of_node);
+}
+
+static int sunxi_reset_remove(struct platform_device *pdev)
+{
+ struct sunxi_reset_data *data = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&data->rcdev);
+ iounmap(data->membase);
+ kfree(data);
+
+ return 0;
+}
+
+static struct platform_driver sunxi_reset_driver = {
+ .probe = sunxi_reset_probe,
+ .remove = sunxi_reset_remove,
+ .driver = {
+ .name = "sunxi-reset",
+ .owner = THIS_MODULE,
+ .of_match_table = sunxi_reset_dt_ids,
+ },
+};
+module_platform_driver(sunxi_reset_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
+MODULE_DESCRIPTION("Allwinner SoCs Reset Controller Driver");
+MODULE_LICENSE("GPL");
The Allwinner A31 has an IP maintaining a few other IPs in the SoC in reset by default. Among these IPs are the High Speed Timers, hence why we can't use the regular driver construct, and need to call the registering function directly during machine initialisation. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- drivers/reset/Makefile | 1 + drivers/reset/reset-sunxi.c | 156 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 157 insertions(+) create mode 100644 drivers/reset/reset-sunxi.c