diff mbox

[v3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones

Message ID 1381869369-14626-1-git-send-email-aaro.koskinen@iki.fi (mailing list archive)
State New, archived
Headers show

Commit Message

Aaro Koskinen Oct. 15, 2013, 8:36 p.m. UTC
Add minimal DT support for Nokia N950 & N9 phones. The same functionality
that is provided by the current board file should work: serial console,
USB, OneNAND and MMC.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
---

	v3: Added Tony's ACK & properties for generic USB PHY framework.

	Previous version: http://marc.info/?t=138005105700010&r=1&w=2

 arch/arm/boot/dts/Makefile           |   2 +
 arch/arm/boot/dts/omap3-n9.dts       |  18 ++++
 arch/arm/boot/dts/omap3-n950-n9.dtsi | 174 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/omap3-n950.dts     |  18 ++++
 4 files changed, 212 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-n9.dts
 create mode 100644 arch/arm/boot/dts/omap3-n950-n9.dtsi
 create mode 100644 arch/arm/boot/dts/omap3-n950.dts

Comments

Tony Lindgren Oct. 16, 2013, 12:35 a.m. UTC | #1
* Aaro Koskinen <aaro.koskinen@iki.fi> [131015 13:36]:
> Add minimal DT support for Nokia N950 & N9 phones. The same functionality
> that is provided by the current board file should work: serial console,
> USB, OneNAND and MMC.
> 
> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> Acked-by: Tony Lindgren <tony@atomide.com>

Oh this is not yet merged, I'll pick this one into the
omap-for-v3.13/board-removal as the board removal patch is
already there.

Regards,

Tony

> ---
> 
> 	v3: Added Tony's ACK & properties for generic USB PHY framework.
> 
> 	Previous version: http://marc.info/?t=138005105700010&r=1&w=2
> 
>  arch/arm/boot/dts/Makefile           |   2 +
>  arch/arm/boot/dts/omap3-n9.dts       |  18 ++++
>  arch/arm/boot/dts/omap3-n950-n9.dtsi | 174 +++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap3-n950.dts     |  18 ++++
>  4 files changed, 212 insertions(+)
>  create mode 100644 arch/arm/boot/dts/omap3-n9.dts
>  create mode 100644 arch/arm/boot/dts/omap3-n950-n9.dtsi
>  create mode 100644 arch/arm/boot/dts/omap3-n950.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 9df7d2c..62d0f4d 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -177,6 +177,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>  	omap3-gta04.dtb \
>  	omap3-igep0020.dtb \
>  	omap3-igep0030.dtb \
> +	omap3-n9.dtb \
> +	omap3-n950.dtb \
>  	omap4-panda.dtb \
>  	omap4-panda-a4.dtb \
>  	omap4-panda-es.dtb \
> diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
> new file mode 100644
> index 0000000..39828ce
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-n9.dts
> @@ -0,0 +1,18 @@
> +/*
> + * omap3-n9.dts - Device Tree file for Nokia N9
> + *
> + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +
> +#include "omap3-n950-n9.dtsi"
> +
> +/ {
> +	model = "Nokia N9";
> +	compatible = "nokia,omap3-n9", "ti,omap3";
> +};
> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> new file mode 100644
> index 0000000..94eb77d
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> @@ -0,0 +1,174 @@
> +/*
> + * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
> + *
> + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "omap36xx.dtsi"
> +
> +/ {
> +	cpus {
> +		cpu@0 {
> +			cpu0-supply = <&vcc>;
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x40000000>; /* 1 GB */
> +	};
> +
> +	vemmc: fixedregulator@0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VEMMC";
> +		regulator-min-microvolt = <2900000>;
> +		regulator-max-microvolt = <2900000>;
> +		gpio = <&gpio5 29 0>; /* gpio line 157 */
> +		startup-delay-us = <150>;
> +		enable-active-high;
> +	};
> +};
> +
> +&omap3_pmx_core {
> +	mmc2_pins: pinmux_mmc2_pins {
> +		pinctrl-single,pins = <
> +			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
> +			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
> +			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
> +			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
> +			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
> +			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
> +		>;
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <2900000>;
> +
> +	twl: twl@48 {
> +		reg = <0x48>;
> +		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> +		interrupt-parent = <&intc>;
> +	};
> +};
> +
> +/include/ "twl4030.dtsi"
> +
> +&twl {
> +	compatible = "ti,twl5031";
> +};
> +
> +&twl_gpio {
> +	ti,pullups	= <0x000001>; /* BIT(0) */
> +	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
> +};
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +};
> +
> +&i2c3 {
> +	clock-frequency = <400000>;
> +};
> +
> +&mmc1 {
> +	status = "disabled";
> +};
> +
> +&mmc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc2_pins>;
> +	vmmc-supply = <&vemmc>;
> +	bus-width = <4>;
> +	ti,non-removable;
> +};
> +
> +&mmc3 {
> +	status = "disabled";
> +};
> +
> +&usb_otg_hs {
> +	interface-type = <0>;
> +	usb-phy = <&usb2_phy>;
> +	phys = <&usb2_phy>;
> +	phy-names = "usb2-phy";
> +	mode = <3>;
> +	power = <50>;
> +};
> +
> +&gpmc {
> +	ranges = <0 0 0x04000000 0x20000000>;
> +
> +	onenand@0,0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		reg = <0 0 0x20000000>;
> +
> +		gpmc,sync-read;
> +		gpmc,sync-write;
> +		gpmc,burst-length = <16>;
> +		gpmc,burst-read;
> +		gpmc,burst-wrap;
> +		gpmc,burst-write;
> +		gpmc,device-width = <2>;
> +		gpmc,mux-add-data = <2>;
> +		gpmc,cs-on-ns = <0>;
> +		gpmc,cs-rd-off-ns = <87>;
> +		gpmc,cs-wr-off-ns = <87>;
> +		gpmc,adv-on-ns = <0>;
> +		gpmc,adv-rd-off-ns = <10>;
> +		gpmc,adv-wr-off-ns = <10>;
> +		gpmc,oe-on-ns = <15>;
> +		gpmc,oe-off-ns = <87>;
> +		gpmc,we-on-ns = <0>;
> +		gpmc,we-off-ns = <87>;
> +		gpmc,rd-cycle-ns = <112>;
> +		gpmc,wr-cycle-ns = <112>;
> +		gpmc,access-ns = <81>;
> +		gpmc,page-burst-access-ns = <15>;
> +		gpmc,bus-turnaround-ns = <0>;
> +		gpmc,cycle2cycle-delay-ns = <0>;
> +		gpmc,wait-monitoring-ns = <0>;
> +		gpmc,clk-activation-ns = <5>;
> +		gpmc,wr-data-mux-bus-ns = <30>;
> +		gpmc,wr-access-ns = <81>;
> +		gpmc,sync-clk-ps = <15000>;
> +
> +		/*
> +		 * MTD partition table corresponding to Nokia's MeeGo 1.2
> +		 * Harmattan release.
> +		 */
> +		partition@0 {
> +			label = "bootloader";
> +			reg = <0x00000000 0x00100000>;
> +		};
> +		partition@1 {
> +			label = "config";
> +			reg = <0x00100000 0x002c0000>;
> +		};
> +		partition@2 {
> +			label = "kernel";
> +			reg = <0x003c0000 0x01000000>;
> +		};
> +		partition@3 {
> +			label = "log";
> +			reg = <0x013c0000 0x00200000>;
> +		};
> +		partition@4 {
> +			label = "var";
> +			reg = <0x015c0000 0x1ca40000>;
> +		};
> +		partition@5 {
> +			label = "moslo";
> +			reg = <0x1e000000 0x02000000>;
> +		};
> +		partition@6 {
> +			label = "omap2-onenand";
> +			reg = <0x00000000 0x20000000>;
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
> new file mode 100644
> index 0000000..b076a52
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-n950.dts
> @@ -0,0 +1,18 @@
> +/*
> + * omap3-n950.dts - Device Tree file for Nokia N950
> + *
> + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +
> +#include "omap3-n950-n9.dtsi"
> +
> +/ {
> +	model = "Nokia N950";
> +	compatible = "nokia,omap3-n950", "ti,omap3";
> +};
> -- 
> 1.8.4.rc3
>
Benoit Cousson Oct. 18, 2013, 3:57 p.m. UTC | #2
On 16/10/2013 02:35, Tony Lindgren wrote:
> * Aaro Koskinen <aaro.koskinen@iki.fi> [131015 13:36]:
>> Add minimal DT support for Nokia N950 & N9 phones. The same functionality
>> that is provided by the current board file should work: serial console,
>> USB, OneNAND and MMC.
>>
>> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
>> Acked-by: Tony Lindgren <tony@atomide.com>
>
> Oh this is not yet merged, I'll pick this one into the
> omap-for-v3.13/board-removal as the board removal patch is
> already there.

Just to be sure. Does that mean that you'll take care of that one, and 
thus I do not have to queue it?

Thanks,
Benoit

> Regards,
>
> Tony
>
>> ---
>>
>> 	v3: Added Tony's ACK & properties for generic USB PHY framework.
>>
>> 	Previous version: http://marc.info/?t=138005105700010&r=1&w=2
>>
>>   arch/arm/boot/dts/Makefile           |   2 +
>>   arch/arm/boot/dts/omap3-n9.dts       |  18 ++++
>>   arch/arm/boot/dts/omap3-n950-n9.dtsi | 174 +++++++++++++++++++++++++++++++++++
>>   arch/arm/boot/dts/omap3-n950.dts     |  18 ++++
>>   4 files changed, 212 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/omap3-n9.dts
>>   create mode 100644 arch/arm/boot/dts/omap3-n950-n9.dtsi
>>   create mode 100644 arch/arm/boot/dts/omap3-n950.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 9df7d2c..62d0f4d 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -177,6 +177,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>>   	omap3-gta04.dtb \
>>   	omap3-igep0020.dtb \
>>   	omap3-igep0030.dtb \
>> +	omap3-n9.dtb \
>> +	omap3-n950.dtb \
>>   	omap4-panda.dtb \
>>   	omap4-panda-a4.dtb \
>>   	omap4-panda-es.dtb \
>> diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
>> new file mode 100644
>> index 0000000..39828ce
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap3-n9.dts
>> @@ -0,0 +1,18 @@
>> +/*
>> + * omap3-n9.dts - Device Tree file for Nokia N9
>> + *
>> + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "omap3-n950-n9.dtsi"
>> +
>> +/ {
>> +	model = "Nokia N9";
>> +	compatible = "nokia,omap3-n9", "ti,omap3";
>> +};
>> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
>> new file mode 100644
>> index 0000000..94eb77d
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
>> @@ -0,0 +1,174 @@
>> +/*
>> + * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
>> + *
>> + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include "omap36xx.dtsi"
>> +
>> +/ {
>> +	cpus {
>> +		cpu@0 {
>> +			cpu0-supply = <&vcc>;
>> +		};
>> +	};
>> +
>> +	memory {
>> +		device_type = "memory";
>> +		reg = <0x80000000 0x40000000>; /* 1 GB */
>> +	};
>> +
>> +	vemmc: fixedregulator@0 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "VEMMC";
>> +		regulator-min-microvolt = <2900000>;
>> +		regulator-max-microvolt = <2900000>;
>> +		gpio = <&gpio5 29 0>; /* gpio line 157 */
>> +		startup-delay-us = <150>;
>> +		enable-active-high;
>> +	};
>> +};
>> +
>> +&omap3_pmx_core {
>> +	mmc2_pins: pinmux_mmc2_pins {
>> +		pinctrl-single,pins = <
>> +			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
>> +			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
>> +			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
>> +			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
>> +			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
>> +			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
>> +		>;
>> +	};
>> +};
>> +
>> +&i2c1 {
>> +	clock-frequency = <2900000>;
>> +
>> +	twl: twl@48 {
>> +		reg = <0x48>;
>> +		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
>> +		interrupt-parent = <&intc>;
>> +	};
>> +};
>> +
>> +/include/ "twl4030.dtsi"
>> +
>> +&twl {
>> +	compatible = "ti,twl5031";
>> +};
>> +
>> +&twl_gpio {
>> +	ti,pullups	= <0x000001>; /* BIT(0) */
>> +	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
>> +};
>> +
>> +&i2c2 {
>> +	clock-frequency = <400000>;
>> +};
>> +
>> +&i2c3 {
>> +	clock-frequency = <400000>;
>> +};
>> +
>> +&mmc1 {
>> +	status = "disabled";
>> +};
>> +
>> +&mmc2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&mmc2_pins>;
>> +	vmmc-supply = <&vemmc>;
>> +	bus-width = <4>;
>> +	ti,non-removable;
>> +};
>> +
>> +&mmc3 {
>> +	status = "disabled";
>> +};
>> +
>> +&usb_otg_hs {
>> +	interface-type = <0>;
>> +	usb-phy = <&usb2_phy>;
>> +	phys = <&usb2_phy>;
>> +	phy-names = "usb2-phy";
>> +	mode = <3>;
>> +	power = <50>;
>> +};
>> +
>> +&gpmc {
>> +	ranges = <0 0 0x04000000 0x20000000>;
>> +
>> +	onenand@0,0 {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		reg = <0 0 0x20000000>;
>> +
>> +		gpmc,sync-read;
>> +		gpmc,sync-write;
>> +		gpmc,burst-length = <16>;
>> +		gpmc,burst-read;
>> +		gpmc,burst-wrap;
>> +		gpmc,burst-write;
>> +		gpmc,device-width = <2>;
>> +		gpmc,mux-add-data = <2>;
>> +		gpmc,cs-on-ns = <0>;
>> +		gpmc,cs-rd-off-ns = <87>;
>> +		gpmc,cs-wr-off-ns = <87>;
>> +		gpmc,adv-on-ns = <0>;
>> +		gpmc,adv-rd-off-ns = <10>;
>> +		gpmc,adv-wr-off-ns = <10>;
>> +		gpmc,oe-on-ns = <15>;
>> +		gpmc,oe-off-ns = <87>;
>> +		gpmc,we-on-ns = <0>;
>> +		gpmc,we-off-ns = <87>;
>> +		gpmc,rd-cycle-ns = <112>;
>> +		gpmc,wr-cycle-ns = <112>;
>> +		gpmc,access-ns = <81>;
>> +		gpmc,page-burst-access-ns = <15>;
>> +		gpmc,bus-turnaround-ns = <0>;
>> +		gpmc,cycle2cycle-delay-ns = <0>;
>> +		gpmc,wait-monitoring-ns = <0>;
>> +		gpmc,clk-activation-ns = <5>;
>> +		gpmc,wr-data-mux-bus-ns = <30>;
>> +		gpmc,wr-access-ns = <81>;
>> +		gpmc,sync-clk-ps = <15000>;
>> +
>> +		/*
>> +		 * MTD partition table corresponding to Nokia's MeeGo 1.2
>> +		 * Harmattan release.
>> +		 */
>> +		partition@0 {
>> +			label = "bootloader";
>> +			reg = <0x00000000 0x00100000>;
>> +		};
>> +		partition@1 {
>> +			label = "config";
>> +			reg = <0x00100000 0x002c0000>;
>> +		};
>> +		partition@2 {
>> +			label = "kernel";
>> +			reg = <0x003c0000 0x01000000>;
>> +		};
>> +		partition@3 {
>> +			label = "log";
>> +			reg = <0x013c0000 0x00200000>;
>> +		};
>> +		partition@4 {
>> +			label = "var";
>> +			reg = <0x015c0000 0x1ca40000>;
>> +		};
>> +		partition@5 {
>> +			label = "moslo";
>> +			reg = <0x1e000000 0x02000000>;
>> +		};
>> +		partition@6 {
>> +			label = "omap2-onenand";
>> +			reg = <0x00000000 0x20000000>;
>> +		};
>> +	};
>> +};
>> diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
>> new file mode 100644
>> index 0000000..b076a52
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/omap3-n950.dts
>> @@ -0,0 +1,18 @@
>> +/*
>> + * omap3-n950.dts - Device Tree file for Nokia N950
>> + *
>> + * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "omap3-n950-n9.dtsi"
>> +
>> +/ {
>> +	model = "Nokia N950";
>> +	compatible = "nokia,omap3-n950", "ti,omap3";
>> +};
>> --
>> 1.8.4.rc3
>>
Tony Lindgren Oct. 18, 2013, 4:06 p.m. UTC | #3
* Benoit Cousson <bcousson@baylibre.com> [131018 08:57]:
> On 16/10/2013 02:35, Tony Lindgren wrote:
> >* Aaro Koskinen <aaro.koskinen@iki.fi> [131015 13:36]:
> >>Add minimal DT support for Nokia N950 & N9 phones. The same functionality
> >>that is provided by the current board file should work: serial console,
> >>USB, OneNAND and MMC.
> >>
> >>Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> >>Acked-by: Tony Lindgren <tony@atomide.com>
> >
> >Oh this is not yet merged, I'll pick this one into the
> >omap-for-v3.13/board-removal as the board removal patch is
> >already there.
> 
> Just to be sure. Does that mean that you'll take care of that one,
> and thus I do not have to queue it?

Yes I have it already in omap-for-v3.13/board-removal.

Regards,

Tony
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9df7d2c..62d0f4d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,6 +177,8 @@  dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-gta04.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \
+	omap3-n9.dtb \
+	omap3-n950.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
new file mode 100644
index 0000000..39828ce
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -0,0 +1,18 @@ 
+/*
+ * omap3-n9.dts - Device Tree file for Nokia N9
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N9";
+	compatible = "nokia,omap3-n9", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
new file mode 100644
index 0000000..94eb77d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -0,0 +1,174 @@ 
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	vemmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEMMC";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		startup-delay-us = <150>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2900000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+	compatible = "ti,twl5031";
+};
+
+&twl_gpio {
+	ti,pullups	= <0x000001>; /* BIT(0) */
+	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vemmc>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x20000000>;
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000000>;
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's MeeGo 1.2
+		 * Harmattan release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00100000 0x002c0000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x003c0000 0x01000000>;
+		};
+		partition@3 {
+			label = "log";
+			reg = <0x013c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "var";
+			reg = <0x015c0000 0x1ca40000>;
+		};
+		partition@5 {
+			label = "moslo";
+			reg = <0x1e000000 0x02000000>;
+		};
+		partition@6 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x20000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
new file mode 100644
index 0000000..b076a52
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -0,0 +1,18 @@ 
+/*
+ * omap3-n950.dts - Device Tree file for Nokia N950
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N950";
+	compatible = "nokia,omap3-n950", "ti,omap3";
+};