From patchwork Thu Oct 17 03:17:11 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Guo X-Patchwork-Id: 3058641 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 6F5809F2B6 for ; Thu, 17 Oct 2013 03:18:48 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 3CB9D2039B for ; Thu, 17 Oct 2013 03:18:47 +0000 (UTC) Received: from casper.infradead.org (casper.infradead.org [85.118.1.10]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 8703C20398 for ; Thu, 17 Oct 2013 03:18:45 +0000 (UTC) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VWe5q-0007Wu-9Z; Thu, 17 Oct 2013 03:17:47 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1VWe5S-0007wY-L0; Thu, 17 Oct 2013 03:17:22 +0000 Received: from mail-db8lp0187.outbound.messaging.microsoft.com ([213.199.154.187] helo=db8outboundpool.messaging.microsoft.com) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VWe58-0007sx-Jz for linux-arm-kernel@lists.infradead.org; Thu, 17 Oct 2013 03:17:06 +0000 Received: from mail101-db8-R.bigfish.com (10.174.8.234) by DB8EHSOBE009.bigfish.com (10.174.4.72) with Microsoft SMTP Server id 14.1.225.22; Thu, 17 Oct 2013 03:16:41 +0000 Received: from mail101-db8 (localhost [127.0.0.1]) by mail101-db8-R.bigfish.com (Postfix) with ESMTP id 150EA240104; Thu, 17 Oct 2013 03:16:41 +0000 (UTC) X-Forefront-Antispam-Report: CIP:70.37.183.190; KIP:(null); UIP:(null); IPV:NLI; H:mail.freescale.net; RD:none; EFVD:NLI X-SpamScore: 3 X-BigFish: VS3(zcb8kzzz1f42h208ch1ee6h1de0h1fdah2073h1202h1e76h1d1ah1d2ah1fc6hzz1de098h17326ah8275dh1de097h186068hz2dh87h2a8h839hd24he5bhf0ah1288h12a5h12a9h12bdh12e5h137ah139eh13b6h1441h1504h1537h162dh1631h1758h1898h18e1h1946h19b5h1ad9h1b0ah1b2fh1fb3h1d0ch1d2eh1d3fh1dfeh1dffh1e23h1fe8h1ff5h1151h1155h) X-FB-DOMAIN-IP-MATCH: fail Received: from mail101-db8 (localhost.localdomain [127.0.0.1]) by mail101-db8 (MessageSwitch) id 1381979798814000_13526; Thu, 17 Oct 2013 03:16:38 +0000 (UTC) Received: from DB8EHSMHS010.bigfish.com (unknown [10.174.8.232]) by mail101-db8.bigfish.com (Postfix) with ESMTP id A1945880041; Thu, 17 Oct 2013 03:16:38 +0000 (UTC) Received: from mail.freescale.net (70.37.183.190) by DB8EHSMHS010.bigfish.com (10.174.4.20) with Microsoft SMTP Server (TLS) id 14.16.227.3; Thu, 17 Oct 2013 03:16:38 +0000 Received: from az84smr01.freescale.net (10.64.34.197) by 039-SN1MMR1-005.039d.mgd.msft.net (10.84.1.17) with Microsoft SMTP Server (TLS) id 14.3.158.2; Thu, 17 Oct 2013 03:16:12 +0000 Received: from S2101-09.ap.freescale.net ([10.192.185.68]) by az84smr01.freescale.net (8.14.3/8.14.0) with ESMTP id r9H3G8sj024540; Wed, 16 Oct 2013 20:16:10 -0700 From: Shawn Guo To: Subject: [PATCH 1/4] ARM: imx6q: move low-power code out of clock driver Date: Thu, 17 Oct 2013 11:17:11 +0800 Message-ID: <1381979834-20998-2-git-send-email-shawn.guo@linaro.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1381979834-20998-1-git-send-email-shawn.guo@linaro.org> References: <1381979834-20998-1-git-send-email-shawn.guo@linaro.org> MIME-Version: 1.0 X-OriginatorOrg: sigmatel.com X-FOPE-CONNECTOR: Id%0$Dn%*$RO%0$TLS%0$FQDN%$TlsDn% X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20131016_231703_022363_B89386EF X-CRM114-Status: GOOD ( 16.98 ) X-Spam-Score: -1.2 (-) Cc: Shawn Guo X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.7 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The LPM (Low Power Mode) code that currently sits in imx6q clock driver will be reused by imx6sl. Let's move it into pm-imx6q.c, so that we can keep clock driver SoC specific and reuse pm-imx6q.c on imx6sl. In order to avoid adding another ioremap for CCM block, imx6q_pm_set_ccm_base() is created to let clock driver set up ccm_base for pm code. During the move, the unused CCGR macros get removed. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 156 +---------------------------------------- arch/arm/mach-imx/common.h | 2 + arch/arm/mach-imx/pm-imx6q.c | 152 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 156 insertions(+), 154 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 07bc0d8..d756d91 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -25,155 +24,6 @@ #include "common.h" #include "hardware.h" -#define CCR 0x0 -#define BM_CCR_WB_COUNT (0x7 << 16) -#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) -#define BM_CCR_RBC_EN (0x1 << 27) - -#define CCGR0 0x68 -#define CCGR1 0x6c -#define CCGR2 0x70 -#define CCGR3 0x74 -#define CCGR4 0x78 -#define CCGR5 0x7c -#define CCGR6 0x80 -#define CCGR7 0x84 - -#define CLPCR 0x54 -#define BP_CLPCR_LPM 0 -#define BM_CLPCR_LPM (0x3 << 0) -#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) -#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) -#define BM_CLPCR_SBYOS (0x1 << 6) -#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) -#define BM_CLPCR_VSTBY (0x1 << 8) -#define BP_CLPCR_STBY_COUNT 9 -#define BM_CLPCR_STBY_COUNT (0x3 << 9) -#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) -#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) -#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) -#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) -#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) -#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) -#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) -#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) -#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) -#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) -#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) - -#define CGPR 0x64 -#define BM_CGPR_CHICKEN_BIT (0x1 << 17) - -static void __iomem *ccm_base; - -void imx6q_set_chicken_bit(void) -{ - u32 val = readl_relaxed(ccm_base + CGPR); - - val |= BM_CGPR_CHICKEN_BIT; - writel_relaxed(val, ccm_base + CGPR); -} - -static void imx6q_enable_rbc(bool enable) -{ - u32 val; - static bool last_rbc_mode; - - if (last_rbc_mode == enable) - return; - /* - * need to mask all interrupts in GPC before - * operating RBC configurations - */ - imx_gpc_mask_all(); - - /* configure RBC enable bit */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_EN; - val |= enable ? BM_CCR_RBC_EN : 0; - writel_relaxed(val, ccm_base + CCR); - - /* configure RBC count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_RBC_BYPASS_COUNT; - val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; - writel(val, ccm_base + CCR); - - /* - * need to delay at least 2 cycles of CKIL(32K) - * due to hardware design requirement, which is - * ~61us, here we use 65us for safe - */ - udelay(65); - - /* restore GPC interrupt mask settings */ - imx_gpc_restore_all(); - - last_rbc_mode = enable; -} - -static void imx6q_enable_wb(bool enable) -{ - u32 val; - static bool last_wb_mode; - - if (last_wb_mode == enable) - return; - - /* configure well bias enable bit */ - val = readl_relaxed(ccm_base + CLPCR); - val &= ~BM_CLPCR_WB_PER_AT_LPM; - val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; - writel_relaxed(val, ccm_base + CLPCR); - - /* configure well bias count */ - val = readl_relaxed(ccm_base + CCR); - val &= ~BM_CCR_WB_COUNT; - val |= enable ? BM_CCR_WB_COUNT : 0; - writel_relaxed(val, ccm_base + CCR); - - last_wb_mode = enable; -} - -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) -{ - u32 val = readl_relaxed(ccm_base + CLPCR); - - val &= ~BM_CLPCR_LPM; - switch (mode) { - case WAIT_CLOCKED: - imx6q_enable_wb(false); - imx6q_enable_rbc(false); - break; - case WAIT_UNCLOCKED: - val |= 0x1 << BP_CLPCR_LPM; - val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; - break; - case STOP_POWER_ON: - val |= 0x2 << BP_CLPCR_LPM; - break; - case WAIT_UNCLOCKED_POWER_OFF: - val |= 0x1 << BP_CLPCR_LPM; - val &= ~BM_CLPCR_VSTBY; - val &= ~BM_CLPCR_SBYOS; - break; - case STOP_POWER_OFF: - val |= 0x2 << BP_CLPCR_LPM; - val |= 0x3 << BP_CLPCR_STBY_COUNT; - val |= BM_CLPCR_VSTBY; - val |= BM_CLPCR_SBYOS; - imx6q_enable_wb(true); - imx6q_enable_rbc(true); - break; - default: - return -EINVAL; - } - - writel_relaxed(val, ccm_base + CLPCR); - - return 0; -} - static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; @@ -384,7 +234,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) np = ccm_node; base = of_iomap(np, 0); WARN_ON(!base); - ccm_base = base; + + imx6q_pm_set_ccm_base(base); /* name reg shift width parent_names num_parents */ clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); @@ -627,9 +478,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) if (IS_ENABLED(CONFIG_PCI_IMX6)) clk_set_parent(clk[lvds1_sel], clk[sata_ref]); - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index c1fe6d5..2b4ce09 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -151,9 +151,11 @@ int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_PM void imx6q_pm_init(void); +void imx6q_pm_set_ccm_base(void __iomem *base); void imx5_pm_init(void); #else static inline void imx6q_pm_init(void) {} +static inline void imx6q_pm_set_ccm_base(void __iomem *base) {} static inline void imx5_pm_init(void) {} #endif diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 2049427..461a895 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -10,9 +10,11 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include #include #include #include +#include #include #include #include @@ -22,6 +24,146 @@ #include "common.h" #include "hardware.h" +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) + +#define CLPCR 0x54 +#define BP_CLPCR_LPM 0 +#define BM_CLPCR_LPM (0x3 << 0) +#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2) +#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5) +#define BM_CLPCR_SBYOS (0x1 << 6) +#define BM_CLPCR_DIS_REF_OSC (0x1 << 7) +#define BM_CLPCR_VSTBY (0x1 << 8) +#define BP_CLPCR_STBY_COUNT 9 +#define BM_CLPCR_STBY_COUNT (0x3 << 9) +#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11) +#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16) +#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17) +#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19) +#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21) +#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22) +#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23) +#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24) +#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25) +#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26) +#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27) + +#define CGPR 0x64 +#define BM_CGPR_CHICKEN_BIT (0x1 << 17) + +static void __iomem *ccm_base; + +void imx6q_set_chicken_bit(void) +{ + u32 val = readl_relaxed(ccm_base + CGPR); + + val |= BM_CGPR_CHICKEN_BIT; + writel_relaxed(val, ccm_base + CGPR); +} + +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + static bool last_rbc_mode; + + if (last_rbc_mode == enable) + return; + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); + + last_rbc_mode = enable; +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + static bool last_wb_mode; + + if (last_wb_mode == enable) + return; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); + + last_wb_mode = enable; +} + +int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +{ + u32 val = readl_relaxed(ccm_base + CLPCR); + + val &= ~BM_CLPCR_LPM; + switch (mode) { + case WAIT_CLOCKED: + imx6q_enable_wb(false); + imx6q_enable_rbc(false); + break; + case WAIT_UNCLOCKED: + val |= 0x1 << BP_CLPCR_LPM; + val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM; + break; + case STOP_POWER_ON: + val |= 0x2 << BP_CLPCR_LPM; + break; + case WAIT_UNCLOCKED_POWER_OFF: + val |= 0x1 << BP_CLPCR_LPM; + val &= ~BM_CLPCR_VSTBY; + val &= ~BM_CLPCR_SBYOS; + break; + case STOP_POWER_OFF: + val |= 0x2 << BP_CLPCR_LPM; + val |= 0x3 << BP_CLPCR_STBY_COUNT; + val |= BM_CLPCR_VSTBY; + val |= BM_CLPCR_SBYOS; + imx6q_enable_wb(true); + imx6q_enable_rbc(true); + break; + default: + return -EINVAL; + } + + writel_relaxed(val, ccm_base + CLPCR); + + return 0; +} + static int imx6q_suspend_finish(unsigned long val) { cpu_do_idle(); @@ -55,7 +197,17 @@ static const struct platform_suspend_ops imx6q_pm_ops = { .valid = suspend_valid_only_mem, }; +void __init imx6q_pm_set_ccm_base(void __iomem *base) +{ + ccm_base = base; +} + void __init imx6q_pm_init(void) { + WARN_ON(!ccm_base); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + suspend_set_ops(&imx6q_pm_ops); }