@@ -83,7 +83,12 @@
* As a result, the TC flag is not asserted and SW received timeout
* exeception. Bit1 of Vendor Spec registor is used to fix it.
*/
-#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
+#define ESDHC_FLAG_MULTIBLK_NO_INT BIT(1)
+/*
+ * The flag enables the workaround for ESDHC errata ENGcm07207 which
+ * affects i.MX25 and i.MX35.
+ */
+#define ESDHC_FLAG_ENGCM07207 BIT(2)
enum imx_esdhc_type {
IMX25_ESDHC,
@@ -857,6 +862,9 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
imx_data->devtype = pdev->id_entry->driver_data;
pltfm_host->priv = imx_data;
+ if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
+ imx_data->flags |= ESDHC_FLAG_ENGCM07207;
+
imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(imx_data->clk_ipg)) {
err = PTR_ERR(imx_data->clk_ipg);
@@ -897,7 +905,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
- if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
+ if (imx_data->flags & ESDHC_FLAG_ENGCM07207)
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
| SDHCI_QUIRK_BROKEN_ADMA;
Just like the use of the flag ESDHC_FLAG_MULTIBLK_NO_INT, let's add another flag ESDHC_FLAG_ENGCM07207 to enable the workaround for errata ENGcm07207 and set the flag for i.MX25 and i.MX35 ESDHC. While at it, let's use BIT() macro for ESDHC_FLAG_MULTIBLK_NO_INT as well. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/mmc/host/sdhci-esdhc-imx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)