@@ -1848,6 +1848,7 @@ config XEN
depends on CPU_V7 && !CPU_V6
depends on !GENERIC_ATOMIC64
select ARM_PSCI
+ select SWIOTLB_XEN
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
@@ -16,4 +16,6 @@ static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
return PARAVIRT_LAZY_NONE;
}
+extern struct dma_map_ops *xen_dma_ops;
+
#endif /* _ASM_ARM_XEN_HYPERVISOR_H */
@@ -6,6 +6,7 @@
#include <linux/pfn.h>
#include <linux/types.h>
+#include <linux/dma-mapping.h>
#include <xen/xen.h>
#include <xen/interface/grant_table.h>
@@ -1 +1 @@
-obj-y := enlighten.o hypercall.o grant-table.o p2m.o
+obj-y := enlighten.o hypercall.o grant-table.o p2m.o mm.o
new file mode 100644
@@ -0,0 +1,64 @@
+#include <linux/bootmem.h>
+#include <linux/gfp.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/swiotlb.h>
+
+#include <xen/xen.h>
+#include <xen/interface/memory.h>
+#include <xen/swiotlb-xen.h>
+
+#include <asm/cacheflush.h>
+#include <asm/xen/page.h>
+#include <asm/xen/hypercall.h>
+#include <asm/xen/interface.h>
+
+int xen_create_contiguous_region(unsigned long vstart, unsigned int order,
+ unsigned int address_bits,
+ dma_addr_t *dma_handle)
+{
+ if (!xen_initial_domain())
+ return -EINVAL;
+
+ /* we assume that dom0 is mapped 1:1 for now */
+ *dma_handle = virt_to_phys(pstart);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xen_create_contiguous_region);
+
+void xen_destroy_contiguous_region(unsigned long vstart, unsigned int order)
+{
+ return;
+}
+EXPORT_SYMBOL_GPL(xen_destroy_contiguous_region);
+
+struct dma_map_ops *xen_dma_ops;
+EXPORT_SYMBOL_GPL(xen_dma_ops);
+
+static struct dma_map_ops xen_swiotlb_dma_ops = {
+ .mapping_error = xen_swiotlb_dma_mapping_error,
+ .alloc = xen_swiotlb_alloc_coherent,
+ .free = xen_swiotlb_free_coherent,
+ .sync_single_for_cpu = xen_swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = xen_swiotlb_sync_single_for_device,
+ .sync_sg_for_cpu = xen_swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = xen_swiotlb_sync_sg_for_device,
+ .map_sg = xen_swiotlb_map_sg_attrs,
+ .unmap_sg = xen_swiotlb_unmap_sg_attrs,
+ .map_page = xen_swiotlb_map_page,
+ .unmap_page = xen_swiotlb_unmap_page,
+ .dma_supported = xen_swiotlb_dma_supported,
+};
+
+int __init xen_mm_init(void)
+{
+ if (!xen_initial_domain())
+ return 0;
+ xen_swiotlb_init(1, false);
+ xen_dma_ops = &xen_swiotlb_dma_ops;
+ return 0;
+}
+arch_initcall(xen_mm_init);
@@ -209,6 +209,7 @@ config XEN_DOM0
config XEN
bool "Xen guest support on ARM64 (EXPERIMENTAL)"
depends on ARM64 && OF
+ select SWIOTLB_XEN
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
@@ -1,2 +1,2 @@
-xen-arm-y += $(addprefix ../../arm/xen/, enlighten.o grant-table.o p2m.o)
+xen-arm-y += $(addprefix ../../arm/xen/, enlighten.o grant-table.o p2m.o mm.o)
obj-y := xen-arm.o hypercall.o
@@ -140,7 +140,6 @@ config XEN_GRANT_DEV_ALLOC
config SWIOTLB_XEN
def_bool y
- depends on PCI && X86
select SWIOTLB
config XEN_TMEM
@@ -42,12 +42,27 @@
#include <xen/page.h>
#include <xen/xen-ops.h>
#include <xen/hvc-console.h>
+#include <asm/dma-mapping.h>
/*
* Used to do a quick range check in swiotlb_tbl_unmap_single and
* swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
* API.
*/
+#ifndef CONFIG_X86
+static unsigned long dma_alloc_coherent_mask(struct device *dev,
+ gfp_t gfp)
+{
+ unsigned long dma_mask = 0;
+
+ dma_mask = dev->coherent_dma_mask;
+ if (!dma_mask)
+ dma_mask = (gfp & GFP_DMA) ? DMA_BIT_MASK(24) : DMA_BIT_MASK(32);
+
+ return dma_mask;
+}
+#endif
+
static char *xen_io_tlb_start, *xen_io_tlb_end;
static unsigned long xen_io_tlb_nslabs;
/*
Xen on arm and arm64 needs SWIOTLB_XEN: when running on Xen we need to program the hardware with mfns rather than pfns for dma addresses. Remove SWIOTLB_XEN dependency on X86 and PCI and make XEN select SWIOTLB_XEN on arm and arm64. At the moment always rely on swiotlb-xen, but when Xen starts supporting hardware IOMMUs we'll be able to avoid it conditionally on the presence of an IOMMU on the platform. Implement xen_create_contiguous_region on arm and arm64: for the moment we assume that dom0 has been mapped 1:1 (physical addresses == machine addresses) therefore we don't need to call XENMEM_exchange. Simply return the physical address as dma address. Initialize the xen-swiotlb from xen_early_init (before the native dma_ops are initialized), set xen_dma_ops to &xen_swiotlb_dma_ops. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Changes in v8: - assume dom0 is mapped 1:1, no need to call XENMEM_exchange. Changes in v7: - call __set_phys_to_machine_multi from xen_create_contiguous_region and xen_destroy_contiguous_region to update the P2M; - don't call XENMEM_unpin, it has been removed; - call XENMEM_exchange instead of XENMEM_exchange_and_pin; - set nr_exchanged to 0 before calling the hypercall. Changes in v6: - introduce and export xen_dma_ops; - call xen_mm_init from as arch_initcall. Changes in v4: - remove redefinition of DMA_ERROR_CODE; - update the code to use XENMEM_exchange_and_pin and XENMEM_unpin; - add a note about hardware IOMMU in the commit message. Changes in v3: - code style changes; - warn on XENMEM_put_dma_buf failures. --- arch/arm/Kconfig | 1 + arch/arm/include/asm/xen/hypervisor.h | 2 + arch/arm/include/asm/xen/page.h | 1 + arch/arm/xen/Makefile | 2 +- arch/arm/xen/mm.c | 64 +++++++++++++++++++++++++++++++++ arch/arm64/Kconfig | 1 + arch/arm64/xen/Makefile | 2 +- drivers/xen/Kconfig | 1 - drivers/xen/swiotlb-xen.c | 15 ++++++++ 9 files changed, 86 insertions(+), 3 deletions(-) create mode 100644 arch/arm/xen/mm.c