diff mbox

[2/2] DTS: ARM: OMAP3-N900: Add LP5523 support

Message ID 1382446896-28436-3-git-send-email-sre@debian.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sebastian Reichel Oct. 22, 2013, 1:01 p.m. UTC 
Add support for LP5523 device.

Signed-off-by: Sebastian Reichel <sre@debian.org>
---
 arch/arm/boot/dts/omap3-n900.dts | 61 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

Comments

Tony Lindgren Oct. 22, 2013, 5:38 p.m. UTC | #1 
* Sebastian Reichel <sre@debian.org> [131022 06:02]:
> Add support for LP5523 device.

This patch should be queued separately by Benoit.

Tony
Bryan Wu Oct. 22, 2013, 5:47 p.m. UTC | #2 
On Tue, Oct 22, 2013 at 10:38 AM, Tony Lindgren <tony@atomide.com> wrote:
> * Sebastian Reichel <sre@debian.org> [131022 06:02]:
>> Add support for LP5523 device.
>
> This patch should be queued separately by Benoit.
>

OK, got it. I will merge Patch 1.

-Bryan
diff mbox

Patch

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 7688f6a..195e1eb 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -230,6 +230,67 @@ 
 
 	clock-frequency = <100000>;
 
+	lp5523: lp5523@32 {
+		compatible = "national,lp5523";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+		chan0 {
+			chan-name = "lp5523:kb1";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan1 {
+			chan-name = "lp5523:kb2";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan2 {
+			chan-name = "lp5523:kb3";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan3 {
+			chan-name = "lp5523:kb4";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan4 {
+			chan-name = "lp5523:b";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan5 {
+			chan-name = "lp5523:g";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan6 {
+			chan-name = "lp5523:r";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan7 {
+			chan-name = "lp5523:kb5";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan8 {
+			chan-name = "lp5523:kb6";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+	};
+
 	bq27200: bq27200@55 {
 		compatible = "ti,bq27200";
 		reg = <0x55>;