diff mbox

[v5,2/8] pinctrl: imx27: imx27 pincontrol driver

Message ID 1382629114-8628-3-git-send-email-mpa@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Markus Pargmann Oct. 24, 2013, 3:38 p.m. UTC 
imx27 pincontrol driver using the imx1 core driver. The DT bindings are
similar to other imx pincontrol drivers.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../bindings/pinctrl/fsl,imx27-pinctrl.txt         |  50 +++
 drivers/pinctrl/Kconfig                            |   8 +
 drivers/pinctrl/Makefile                           |   1 +
 drivers/pinctrl/pinctrl-imx27.c                    | 477 +++++++++++++++++++++
 4 files changed, 536 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-imx27.c

Comments

Matt Sealey Oct. 24, 2013, 7:46 p.m. UTC | #1 
On Thu, Oct 24, 2013 at 10:38 AM, Markus Pargmann <mpa@pengutronix.de> wrote:
> imx27 pincontrol driver using the imx1 core driver. The DT bindings are
> similar to other imx pincontrol drivers.
>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
> Acked-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  .../bindings/pinctrl/fsl,imx27-pinctrl.txt         |  50 +++
>  drivers/pinctrl/Kconfig                            |   8 +
>  drivers/pinctrl/Makefile                           |   1 +
>  drivers/pinctrl/pinctrl-imx27.c                    | 477 +++++++++++++++++++++
>  4 files changed, 536 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
>  create mode 100644 drivers/pinctrl/pinctrl-imx27.c
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> new file mode 100644
> index 0000000..6619968
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> @@ -0,0 +1,50 @@
> +* Freescale IMX27 IOMUX Controller
> +
> +Required properties:
> +- compatible: "fsl,imx27-iomuxc"
> +
> +The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes.
> +
> +Required properties for pin configuration node:
> +- fsl,pins: three integers array, represents a group of pins mux and config
> +  setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. PIN and MUX_ID are
> +  defined as macros in arch/arm/boot/dts/imx27-pinfunc.h. CONFIG can be 0 or

Can we get away from this concept that a binding is predicated on the
fact that they're preprocessed? You're getting it half right.. as
below.

Binding descriptions must NOT rely on preprocessing helpers, for the
following reasons

* Device trees could be generated by methods other than preprocessed source
* Device trees could be generated by Linux builds and passed to other
operating systems (therefore they need to know the definition in
reality).

Please provide and describe the RAW data format of the property and
then somewhere afterwards mention that as a convenience there are
preprocessor macros which make life easier. You can also mention the
include name, but the path (arch/arm/boot/dts) may not be fixed. This
may not even be Linux. They may be split elsewhere in a separate tree
that has no OS and therefore a different layout. Bindings should be OS
agnostic - certainly source code location agnostic - where possible.

> +  PIN is a integer between 0 and 0xbf

Correct.

>                                                                imx27 has 6 ports with 32 configurable
> +  configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
> +  number on the specific port (between 0 and 31).

Correct.

> +  MUX_ID is
> +  function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
> +  function:      0 - Primary function
> +                 1 - Alternate function
> +                 2 - GPIO
> +  direction:     0 - Input
> +                 1 - Output
> +  gpio_oconf:    0 - A_IN
> +                 1 - B_IN
> +                 2 - C_IN
> +                 3 - Data Register
> +  gpio_iconfa/b: 0 - GPIO_IN
> +                 1 - Interrupt Status Register
> +                 2 - 0
> +                 3 - 1

Correct, but I don't like mixing register values for multiple
registers in a single field. I guess you'd waste a ton of space any
other way, so acceptable.

If they're the bits for a single register (could be, but I don't have
access to an i.MX27 manual right now) then just describe it as the
content of the register as defined in a location in the manual, you
won't need to re-describe what is already in the manual.

> +Example:
> +
> +iomuxc: iomuxc@10015000 {
> +       compatible = "fsl,imx27-iomuxc";
> +       reg = <0x10015000 0x600>;
> +
> +       uart {
> +               pinctrl_uart1: uart-1 {
> +                       fsl,pins = <
> +                               MX27_PAD_UART1_TXD__UART1_TXD 0x0

Incorrect.

Your example should show the raw output. Try compiling this and then
performing the following:

scripts/dtc/dtc -I dtb -O dts imx27-my-platform.dtb

The place where pinctrl_uart1 is in that output is your example. Lots
of awful, unreadable numbers.

However you may provide a second example explaining the convenience of
using the preprocessor macros exactly as above, perhaps with the
location of the preprocessor macros include.

> +                               MX27_PAD_UART1_RXD__UART1_RXD 0x0

One question; are these definitions the one in the manual (for the
names etc, in the huge enums later, especially?) or stripped from
existing source code?

Bindings - and their preprocessor helper macros - should follow the
latest manual if they can. There are many odd differences in i.MX6
pinctrl, but for instance if the manual describes it as SD_DAT3 with
function SD_DATA3 then it should be SD_DAT3__SD_DATA3 rather than
SD_DAT3__SD_DAT3 (even if the SD Association spec says DAT3, since you
are describing an i.MX27 mux, not the SD physical layer :). That way
the preprocessor definitions can be searched for in the manual with
some mangling, and searched for in the headers by pasting out the
function name or the original pin name. If they differ, then someone
has to resolve the differences with their brain which is more work for
the reader.

Thanks,
Matt Sealey <neko@bakuhatsu.net>
Markus Pargmann Oct. 28, 2013, 7:57 a.m. UTC | #2 
Hi,

On Thu, Oct 24, 2013 at 02:46:58PM -0500, Matt Sealey wrote:
> On Thu, Oct 24, 2013 at 10:38 AM, Markus Pargmann <mpa@pengutronix.de> wrote:
> > imx27 pincontrol driver using the imx1 core driver. The DT bindings are
> > similar to other imx pincontrol drivers.
> >
> > Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> > Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
> > Acked-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >  .../bindings/pinctrl/fsl,imx27-pinctrl.txt         |  50 +++
> >  drivers/pinctrl/Kconfig                            |   8 +
> >  drivers/pinctrl/Makefile                           |   1 +
> >  drivers/pinctrl/pinctrl-imx27.c                    | 477 +++++++++++++++++++++
> >  4 files changed, 536 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> >  create mode 100644 drivers/pinctrl/pinctrl-imx27.c
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> > new file mode 100644
> > index 0000000..6619968
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
> > @@ -0,0 +1,50 @@
> > +* Freescale IMX27 IOMUX Controller
> > +
> > +Required properties:
> > +- compatible: "fsl,imx27-iomuxc"
> > +
> > +The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes.
> > +
> > +Required properties for pin configuration node:
> > +- fsl,pins: three integers array, represents a group of pins mux and config
> > +  setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. PIN and MUX_ID are
> > +  defined as macros in arch/arm/boot/dts/imx27-pinfunc.h. CONFIG can be 0 or
> 
> Can we get away from this concept that a binding is predicated on the
> fact that they're preprocessed? You're getting it half right.. as
> below.
> 
> Binding descriptions must NOT rely on preprocessing helpers, for the
> following reasons
> 
> * Device trees could be generated by methods other than preprocessed source
> * Device trees could be generated by Linux builds and passed to other
> operating systems (therefore they need to know the definition in
> reality).
> 
> Please provide and describe the RAW data format of the property and
> then somewhere afterwards mention that as a convenience there are
> preprocessor macros which make life easier. You can also mention the
> include name, but the path (arch/arm/boot/dts) may not be fixed. This
> may not even be Linux. They may be split elsewhere in a separate tree
> that has no OS and therefore a different layout. Bindings should be OS
> agnostic - certainly source code location agnostic - where possible.
> 
> > +  PIN is a integer between 0 and 0xbf
> 
> Correct.
> 
> >                                                                imx27 has 6 ports with 32 configurable
> > +  configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
> > +  number on the specific port (between 0 and 31).
> 
> Correct.
> 
> > +  MUX_ID is
> > +  function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
> > +  function:      0 - Primary function
> > +                 1 - Alternate function
> > +                 2 - GPIO
> > +  direction:     0 - Input
> > +                 1 - Output
> > +  gpio_oconf:    0 - A_IN
> > +                 1 - B_IN
> > +                 2 - C_IN
> > +                 3 - Data Register
> > +  gpio_iconfa/b: 0 - GPIO_IN
> > +                 1 - Interrupt Status Register
> > +                 2 - 0
> > +                 3 - 1
> 
> Correct, but I don't like mixing register values for multiple
> registers in a single field. I guess you'd waste a ton of space any
> other way, so acceptable.
> 
> If they're the bits for a single register (could be, but I don't have
> access to an i.MX27 manual right now) then just describe it as the
> content of the register as defined in a location in the manual, you
> won't need to re-describe what is already in the manual.

Unfortunately it is not the content of a single register. It is spreaded
across multiple registers each one containing the configuration of all
pins of one port.

The above described parts are nearly identical to the real registers.
"direction", "gpio_oconf" and "gpio_iconfa/b" exist as registers.
"function" is describing two registers, "GIUS" (GPIO in use) and "GPR"
(General Purpose Register). function is (GIUS << 1) + GPR.

I will add the registernames to the documentation.

> 
> > +Example:
> > +
> > +iomuxc: iomuxc@10015000 {
> > +       compatible = "fsl,imx27-iomuxc";
> > +       reg = <0x10015000 0x600>;
> > +
> > +       uart {
> > +               pinctrl_uart1: uart-1 {
> > +                       fsl,pins = <
> > +                               MX27_PAD_UART1_TXD__UART1_TXD 0x0
> 
> Incorrect.
> 
> Your example should show the raw output. Try compiling this and then
> performing the following:
> 
> scripts/dtc/dtc -I dtb -O dts imx27-my-platform.dtb
> 
> The place where pinctrl_uart1 is in that output is your example. Lots
> of awful, unreadable numbers.
> 
> However you may provide a second example explaining the convenience of
> using the preprocessor macros exactly as above, perhaps with the
> location of the preprocessor macros include.

Okay, I will change the example and add some documentation about the
macros at the end of the document.

> 
> > +                               MX27_PAD_UART1_RXD__UART1_RXD 0x0
> 
> One question; are these definitions the one in the manual (for the
> names etc, in the huge enums later, especially?) or stripped from
> existing source code?

The definitions are from the manual

MX27_PAD_<Pad name>__<Signal name>

Thanks,

Markus Pargmann

> 
> Bindings - and their preprocessor helper macros - should follow the
> latest manual if they can. There are many odd differences in i.MX6
> pinctrl, but for instance if the manual describes it as SD_DAT3 with
> function SD_DATA3 then it should be SD_DAT3__SD_DATA3 rather than
> SD_DAT3__SD_DAT3 (even if the SD Association spec says DAT3, since you
> are describing an i.MX27 mux, not the SD physical layer :). That way
> the preprocessor definitions can be searched for in the manual with
> some mangling, and searched for in the headers by pasting out the
> function name or the original pin name. If they differ, then someone
> has to resolve the differences with their brain which is more work for
> the reader.
> 
> Thanks,
> Matt Sealey <neko@bakuhatsu.net>
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
new file mode 100644
index 0000000..6619968
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
@@ -0,0 +1,50 @@ 
+* Freescale IMX27 IOMUX Controller
+
+Required properties:
+- compatible: "fsl,imx27-iomuxc"
+
+The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes.
+
+Required properties for pin configuration node:
+- fsl,pins: three integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN MUX_ID CONFIG>. PIN and MUX_ID are
+  defined as macros in arch/arm/boot/dts/imx27-pinfunc.h. CONFIG can be 0 or
+  1, meaning Pullup disable/enable.
+  PIN is a integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+  configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+  number on the specific port (between 0 and 31).
+  MUX_ID is
+  function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+  function:      0 - Primary function
+                 1 - Alternate function
+                 2 - GPIO
+  direction:     0 - Input
+                 1 - Output
+  gpio_oconf:    0 - A_IN
+                 1 - B_IN
+                 2 - C_IN
+                 3 - Data Register
+  gpio_iconfa/b: 0 - GPIO_IN
+                 1 - Interrupt Status Register
+                 2 - 0
+                 3 - 1
+
+Example:
+
+iomuxc: iomuxc@10015000 {
+	compatible = "fsl,imx27-iomuxc";
+	reg = <0x10015000 0x600>;
+
+	uart {
+		pinctrl_uart1: uart-1 {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		...
+	};
+};
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8a02aa0..4c3e5d2 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -85,6 +85,14 @@  config PINCTRL_IMX1_CORE
 	select PINMUX
 	select PINCONF
 
+config PINCTRL_IMX27
+	bool "IMX27 pinctrl driver"
+	depends on OF
+	depends on SOC_IMX27
+	select PINCTRL_IMX1_CORE
+	help
+	  Say Y here to enable the imx27 pinctrl driver
+
 config PINCTRL_IMX35
 	bool "IMX35 pinctrl driver"
 	depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index d7caf08..5d23b71 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -19,6 +19,7 @@  obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX1_CORE)	+= pinctrl-imx1-core.o
+obj-$(CONFIG_PINCTRL_IMX27)	+= pinctrl-imx27.o
 obj-$(CONFIG_PINCTRL_IMX35)	+= pinctrl-imx35.o
 obj-$(CONFIG_PINCTRL_IMX51)	+= pinctrl-imx51.o
 obj-$(CONFIG_PINCTRL_IMX53)	+= pinctrl-imx53.o
diff --git a/drivers/pinctrl/pinctrl-imx27.c b/drivers/pinctrl/pinctrl-imx27.c
new file mode 100644
index 0000000..417c992
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-imx27.c
@@ -0,0 +1,477 @@ 
+/*
+ * imx27 pinctrl driver based on imx pinmux core
+ *
+ * Copyright (C) 2013 Pengutronix
+ *
+ * Author: Markus Pargmann <mpa@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx1.h"
+
+#define PAD_ID(port, pin) (port*32 + pin)
+#define PA 0
+#define PB 1
+#define PC 2
+#define PD 3
+#define PE 4
+#define PF 5
+
+enum imx27_pads {
+	MX27_PAD_USBH2_CLK = PAD_ID(PA, 0),
+	MX27_PAD_USBH2_DIR = PAD_ID(PA, 1),
+	MX27_PAD_USBH2_DATA7 = PAD_ID(PA, 2),
+	MX27_PAD_USBH2_NXT = PAD_ID(PA, 3),
+	MX27_PAD_USBH2_STP = PAD_ID(PA, 4),
+	MX27_PAD_LSCLK = PAD_ID(PA, 5),
+	MX27_PAD_LD0 = PAD_ID(PA, 6),
+	MX27_PAD_LD1 = PAD_ID(PA, 7),
+	MX27_PAD_LD2 = PAD_ID(PA, 8),
+	MX27_PAD_LD3 = PAD_ID(PA, 9),
+	MX27_PAD_LD4 = PAD_ID(PA, 10),
+	MX27_PAD_LD5 = PAD_ID(PA, 11),
+	MX27_PAD_LD6 = PAD_ID(PA, 12),
+	MX27_PAD_LD7 = PAD_ID(PA, 13),
+	MX27_PAD_LD8 = PAD_ID(PA, 14),
+	MX27_PAD_LD9 = PAD_ID(PA, 15),
+	MX27_PAD_LD10 = PAD_ID(PA, 16),
+	MX27_PAD_LD11 = PAD_ID(PA, 17),
+	MX27_PAD_LD12 = PAD_ID(PA, 18),
+	MX27_PAD_LD13 = PAD_ID(PA, 19),
+	MX27_PAD_LD14 = PAD_ID(PA, 20),
+	MX27_PAD_LD15 = PAD_ID(PA, 21),
+	MX27_PAD_LD16 = PAD_ID(PA, 22),
+	MX27_PAD_LD17 = PAD_ID(PA, 23),
+	MX27_PAD_REV = PAD_ID(PA, 24),
+	MX27_PAD_CLS = PAD_ID(PA, 25),
+	MX27_PAD_PS = PAD_ID(PA, 26),
+	MX27_PAD_SPL_SPR = PAD_ID(PA, 27),
+	MX27_PAD_HSYNC = PAD_ID(PA, 28),
+	MX27_PAD_VSYNC = PAD_ID(PA, 29),
+	MX27_PAD_CONTRAST = PAD_ID(PA, 30),
+	MX27_PAD_OE_ACD = PAD_ID(PA, 31),
+
+	MX27_PAD_UNUSED0 = PAD_ID(PB, 0),
+	MX27_PAD_UNUSED1 = PAD_ID(PB, 1),
+	MX27_PAD_UNUSED2 = PAD_ID(PB, 2),
+	MX27_PAD_UNUSED3 = PAD_ID(PB, 3),
+	MX27_PAD_SD2_D0 = PAD_ID(PB, 4),
+	MX27_PAD_SD2_D1 = PAD_ID(PB, 5),
+	MX27_PAD_SD2_D2 = PAD_ID(PB, 6),
+	MX27_PAD_SD2_D3 = PAD_ID(PB, 7),
+	MX27_PAD_SD2_CMD = PAD_ID(PB, 8),
+	MX27_PAD_SD2_CLK = PAD_ID(PB, 9),
+	MX27_PAD_CSI_D0 = PAD_ID(PB, 10),
+	MX27_PAD_CSI_D1 = PAD_ID(PB, 11),
+	MX27_PAD_CSI_D2 = PAD_ID(PB, 12),
+	MX27_PAD_CSI_D3 = PAD_ID(PB, 13),
+	MX27_PAD_CSI_D4 = PAD_ID(PB, 14),
+	MX27_PAD_CSI_MCLK = PAD_ID(PB, 15),
+	MX27_PAD_CSI_PIXCLK = PAD_ID(PB, 16),
+	MX27_PAD_CSI_D5 = PAD_ID(PB, 17),
+	MX27_PAD_CSI_D6 = PAD_ID(PB, 18),
+	MX27_PAD_CSI_D7 = PAD_ID(PB, 19),
+	MX27_PAD_CSI_VSYNC = PAD_ID(PB, 20),
+	MX27_PAD_CSI_HSYNC = PAD_ID(PB, 21),
+	MX27_PAD_USBH1_SUSP = PAD_ID(PB, 22),
+	MX27_PAD_USB_PWR = PAD_ID(PB, 23),
+	MX27_PAD_USB_OC_B = PAD_ID(PB, 24),
+	MX27_PAD_USBH1_RCV = PAD_ID(PB, 25),
+	MX27_PAD_USBH1_FS = PAD_ID(PB, 26),
+	MX27_PAD_USBH1_OE_B = PAD_ID(PB, 27),
+	MX27_PAD_USBH1_TXDM = PAD_ID(PB, 28),
+	MX27_PAD_USBH1_TXDP = PAD_ID(PB, 29),
+	MX27_PAD_USBH1_RXDM = PAD_ID(PB, 30),
+	MX27_PAD_USBH1_RXDP = PAD_ID(PB, 31),
+
+	MX27_PAD_UNUSED4 = PAD_ID(PC, 0),
+	MX27_PAD_UNUSED5 = PAD_ID(PC, 1),
+	MX27_PAD_UNUSED6 = PAD_ID(PC, 2),
+	MX27_PAD_UNUSED7 = PAD_ID(PC, 3),
+	MX27_PAD_UNUSED8 = PAD_ID(PC, 4),
+	MX27_PAD_I2C2_SDA = PAD_ID(PC, 5),
+	MX27_PAD_I2C2_SCL = PAD_ID(PC, 6),
+	MX27_PAD_USBOTG_DATA5 = PAD_ID(PC, 7),
+	MX27_PAD_USBOTG_DATA6 = PAD_ID(PC, 8),
+	MX27_PAD_USBOTG_DATA0 = PAD_ID(PC, 9),
+	MX27_PAD_USBOTG_DATA2 = PAD_ID(PC, 10),
+	MX27_PAD_USBOTG_DATA1 = PAD_ID(PC, 11),
+	MX27_PAD_USBOTG_DATA4 = PAD_ID(PC, 12),
+	MX27_PAD_USBOTG_DATA3 = PAD_ID(PC, 13),
+	MX27_PAD_TOUT = PAD_ID(PC, 14),
+	MX27_PAD_TIN = PAD_ID(PC, 15),
+	MX27_PAD_SSI4_FS = PAD_ID(PC, 16),
+	MX27_PAD_SSI4_RXDAT = PAD_ID(PC, 17),
+	MX27_PAD_SSI4_TXDAT = PAD_ID(PC, 18),
+	MX27_PAD_SSI4_CLK = PAD_ID(PC, 19),
+	MX27_PAD_SSI1_FS = PAD_ID(PC, 20),
+	MX27_PAD_SSI1_RXDAT = PAD_ID(PC, 21),
+	MX27_PAD_SSI1_TXDAT = PAD_ID(PC, 22),
+	MX27_PAD_SSI1_CLK = PAD_ID(PC, 23),
+	MX27_PAD_SSI2_FS = PAD_ID(PC, 24),
+	MX27_PAD_SSI2_RXDAT = PAD_ID(PC, 25),
+	MX27_PAD_SSI2_TXDAT = PAD_ID(PC, 26),
+	MX27_PAD_SSI2_CLK = PAD_ID(PC, 27),
+	MX27_PAD_SSI3_FS = PAD_ID(PC, 28),
+	MX27_PAD_SSI3_RXDAT = PAD_ID(PC, 29),
+	MX27_PAD_SSI3_TXDAT = PAD_ID(PC, 30),
+	MX27_PAD_SSI3_CLK = PAD_ID(PC, 31),
+
+	MX27_PAD_SD3_CMD = PAD_ID(PD, 0),
+	MX27_PAD_SD3_CLK = PAD_ID(PD, 1),
+	MX27_PAD_ATA_DATA0 = PAD_ID(PD, 2),
+	MX27_PAD_ATA_DATA1 = PAD_ID(PD, 3),
+	MX27_PAD_ATA_DATA2 = PAD_ID(PD, 4),
+	MX27_PAD_ATA_DATA3 = PAD_ID(PD, 5),
+	MX27_PAD_ATA_DATA4 = PAD_ID(PD, 6),
+	MX27_PAD_ATA_DATA5 = PAD_ID(PD, 7),
+	MX27_PAD_ATA_DATA6 = PAD_ID(PD, 8),
+	MX27_PAD_ATA_DATA7 = PAD_ID(PD, 9),
+	MX27_PAD_ATA_DATA8 = PAD_ID(PD, 10),
+	MX27_PAD_ATA_DATA9 = PAD_ID(PD, 11),
+	MX27_PAD_ATA_DATA10 = PAD_ID(PD, 12),
+	MX27_PAD_ATA_DATA11 = PAD_ID(PD, 13),
+	MX27_PAD_ATA_DATA12 = PAD_ID(PD, 14),
+	MX27_PAD_ATA_DATA13 = PAD_ID(PD, 15),
+	MX27_PAD_ATA_DATA14 = PAD_ID(PD, 16),
+	MX27_PAD_I2C_DATA = PAD_ID(PD, 17),
+	MX27_PAD_I2C_CLK = PAD_ID(PD, 18),
+	MX27_PAD_CSPI2_SS2 = PAD_ID(PD, 19),
+	MX27_PAD_CSPI2_SS1 = PAD_ID(PD, 20),
+	MX27_PAD_CSPI2_SS0 = PAD_ID(PD, 21),
+	MX27_PAD_CSPI2_SCLK = PAD_ID(PD, 22),
+	MX27_PAD_CSPI2_MISO = PAD_ID(PD, 23),
+	MX27_PAD_CSPI2_MOSI = PAD_ID(PD, 24),
+	MX27_PAD_CSPI1_RDY = PAD_ID(PD, 25),
+	MX27_PAD_CSPI1_SS2 = PAD_ID(PD, 26),
+	MX27_PAD_CSPI1_SS1 = PAD_ID(PD, 27),
+	MX27_PAD_CSPI1_SS0 = PAD_ID(PD, 28),
+	MX27_PAD_CSPI1_SCLK = PAD_ID(PD, 29),
+	MX27_PAD_CSPI1_MISO = PAD_ID(PD, 30),
+	MX27_PAD_CSPI1_MOSI = PAD_ID(PD, 31),
+
+	MX27_PAD_USBOTG_NXT = PAD_ID(PE, 0),
+	MX27_PAD_USBOTG_STP = PAD_ID(PE, 1),
+	MX27_PAD_USBOTG_DIR = PAD_ID(PE, 2),
+	MX27_PAD_UART2_CTS = PAD_ID(PE, 3),
+	MX27_PAD_UART2_RTS = PAD_ID(PE, 4),
+	MX27_PAD_PWMO = PAD_ID(PE, 5),
+	MX27_PAD_UART2_TXD = PAD_ID(PE, 6),
+	MX27_PAD_UART2_RXD = PAD_ID(PE, 7),
+	MX27_PAD_UART3_TXD = PAD_ID(PE, 8),
+	MX27_PAD_UART3_RXD = PAD_ID(PE, 9),
+	MX27_PAD_UART3_CTS = PAD_ID(PE, 10),
+	MX27_PAD_UART3_RTS = PAD_ID(PE, 11),
+	MX27_PAD_UART1_TXD = PAD_ID(PE, 12),
+	MX27_PAD_UART1_RXD = PAD_ID(PE, 13),
+	MX27_PAD_UART1_CTS = PAD_ID(PE, 14),
+	MX27_PAD_UART1_RTS = PAD_ID(PE, 15),
+	MX27_PAD_RTCK = PAD_ID(PE, 16),
+	MX27_PAD_RESET_OUT_B = PAD_ID(PE, 17),
+	MX27_PAD_SD1_D0 = PAD_ID(PE, 18),
+	MX27_PAD_SD1_D1 = PAD_ID(PE, 19),
+	MX27_PAD_SD1_D2 = PAD_ID(PE, 20),
+	MX27_PAD_SD1_D3 = PAD_ID(PE, 21),
+	MX27_PAD_SD1_CMD = PAD_ID(PE, 22),
+	MX27_PAD_SD1_CLK = PAD_ID(PE, 23),
+	MX27_PAD_USBOTG_CLK = PAD_ID(PE, 24),
+	MX27_PAD_USBOTG_DATA7 = PAD_ID(PE, 25),
+	MX27_PAD_UNUSED9 = PAD_ID(PE, 26),
+	MX27_PAD_UNUSED10 = PAD_ID(PE, 27),
+	MX27_PAD_UNUSED11 = PAD_ID(PE, 28),
+	MX27_PAD_UNUSED12 = PAD_ID(PE, 29),
+	MX27_PAD_UNUSED13 = PAD_ID(PE, 30),
+	MX27_PAD_UNUSED14 = PAD_ID(PE, 31),
+
+	MX27_PAD_NFRB = PAD_ID(PF, 0),
+	MX27_PAD_NFCLE = PAD_ID(PF, 1),
+	MX27_PAD_NFWP_B = PAD_ID(PF, 2),
+	MX27_PAD_NFCE_B = PAD_ID(PF, 3),
+	MX27_PAD_NFALE = PAD_ID(PF, 4),
+	MX27_PAD_NFRE_B = PAD_ID(PF, 5),
+	MX27_PAD_NFWE_B = PAD_ID(PF, 6),
+	MX27_PAD_PC_POE = PAD_ID(PF, 7),
+	MX27_PAD_PC_RW_B = PAD_ID(PF, 8),
+	MX27_PAD_IOIS16 = PAD_ID(PF, 9),
+	MX27_PAD_PC_RST = PAD_ID(PF, 10),
+	MX27_PAD_PC_BVD2 = PAD_ID(PF, 11),
+	MX27_PAD_PC_BVD1 = PAD_ID(PF, 12),
+	MX27_PAD_PC_VS2 = PAD_ID(PF, 13),
+	MX27_PAD_PC_VS1 = PAD_ID(PF, 14),
+	MX27_PAD_CLKO = PAD_ID(PF, 15),
+	MX27_PAD_PC_PWRON = PAD_ID(PF, 16),
+	MX27_PAD_PC_READY = PAD_ID(PF, 17),
+	MX27_PAD_PC_WAIT_B = PAD_ID(PF, 18),
+	MX27_PAD_PC_CD2_B = PAD_ID(PF, 19),
+	MX27_PAD_PC_CD1_B = PAD_ID(PF, 20),
+	MX27_PAD_CS4_B = PAD_ID(PF, 21),
+	MX27_PAD_CS5_B = PAD_ID(PF, 22),
+	MX27_PAD_ATA_DATA15 = PAD_ID(PF, 23),
+	MX27_PAD_UNUSED15 = PAD_ID(PF, 24),
+	MX27_PAD_UNUSED16 = PAD_ID(PF, 25),
+	MX27_PAD_UNUSED17 = PAD_ID(PF, 26),
+	MX27_PAD_UNUSED18 = PAD_ID(PF, 27),
+	MX27_PAD_UNUSED19 = PAD_ID(PF, 28),
+	MX27_PAD_UNUSED20 = PAD_ID(PF, 29),
+	MX27_PAD_UNUSED21 = PAD_ID(PF, 30),
+	MX27_PAD_UNUSED22 = PAD_ID(PF, 31),
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx27_pinctrl_pads[] = {
+	IMX_PINCTRL_PIN(MX27_PAD_USBH2_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH2_DIR),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH2_DATA7),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH2_NXT),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH2_STP),
+	IMX_PINCTRL_PIN(MX27_PAD_LSCLK),
+	IMX_PINCTRL_PIN(MX27_PAD_LD0),
+	IMX_PINCTRL_PIN(MX27_PAD_LD1),
+	IMX_PINCTRL_PIN(MX27_PAD_LD2),
+	IMX_PINCTRL_PIN(MX27_PAD_LD3),
+	IMX_PINCTRL_PIN(MX27_PAD_LD4),
+	IMX_PINCTRL_PIN(MX27_PAD_LD5),
+	IMX_PINCTRL_PIN(MX27_PAD_LD6),
+	IMX_PINCTRL_PIN(MX27_PAD_LD7),
+	IMX_PINCTRL_PIN(MX27_PAD_LD8),
+	IMX_PINCTRL_PIN(MX27_PAD_LD9),
+	IMX_PINCTRL_PIN(MX27_PAD_LD10),
+	IMX_PINCTRL_PIN(MX27_PAD_LD11),
+	IMX_PINCTRL_PIN(MX27_PAD_LD12),
+	IMX_PINCTRL_PIN(MX27_PAD_LD13),
+	IMX_PINCTRL_PIN(MX27_PAD_LD14),
+	IMX_PINCTRL_PIN(MX27_PAD_LD15),
+	IMX_PINCTRL_PIN(MX27_PAD_LD16),
+	IMX_PINCTRL_PIN(MX27_PAD_LD17),
+	IMX_PINCTRL_PIN(MX27_PAD_REV),
+	IMX_PINCTRL_PIN(MX27_PAD_CLS),
+	IMX_PINCTRL_PIN(MX27_PAD_PS),
+	IMX_PINCTRL_PIN(MX27_PAD_SPL_SPR),
+	IMX_PINCTRL_PIN(MX27_PAD_HSYNC),
+	IMX_PINCTRL_PIN(MX27_PAD_VSYNC),
+	IMX_PINCTRL_PIN(MX27_PAD_CONTRAST),
+	IMX_PINCTRL_PIN(MX27_PAD_OE_ACD),
+
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED0),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED1),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED2),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED3),
+	IMX_PINCTRL_PIN(MX27_PAD_SD2_D0),
+	IMX_PINCTRL_PIN(MX27_PAD_SD2_D1),
+	IMX_PINCTRL_PIN(MX27_PAD_SD2_D2),
+	IMX_PINCTRL_PIN(MX27_PAD_SD2_D3),
+	IMX_PINCTRL_PIN(MX27_PAD_SD2_CMD),
+	IMX_PINCTRL_PIN(MX27_PAD_SD2_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D0),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D1),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D2),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D3),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D4),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_MCLK),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_PIXCLK),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D5),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D6),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_D7),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_VSYNC),
+	IMX_PINCTRL_PIN(MX27_PAD_CSI_HSYNC),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_SUSP),
+	IMX_PINCTRL_PIN(MX27_PAD_USB_PWR),
+	IMX_PINCTRL_PIN(MX27_PAD_USB_OC_B),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_RCV),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_FS),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_OE_B),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_TXDM),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_TXDP),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_RXDM),
+	IMX_PINCTRL_PIN(MX27_PAD_USBH1_RXDP),
+
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED4),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED5),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED6),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED7),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED8),
+	IMX_PINCTRL_PIN(MX27_PAD_I2C2_SDA),
+	IMX_PINCTRL_PIN(MX27_PAD_I2C2_SCL),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA5),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA6),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA0),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA2),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA1),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA4),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA3),
+	IMX_PINCTRL_PIN(MX27_PAD_TOUT),
+	IMX_PINCTRL_PIN(MX27_PAD_TIN),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI4_FS),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI4_RXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI4_TXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI4_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI1_FS),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI1_RXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI1_TXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI1_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI2_FS),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI2_RXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI2_TXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI2_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI3_FS),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI3_RXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI3_TXDAT),
+	IMX_PINCTRL_PIN(MX27_PAD_SSI3_CLK),
+
+	IMX_PINCTRL_PIN(MX27_PAD_SD3_CMD),
+	IMX_PINCTRL_PIN(MX27_PAD_SD3_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA0),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA1),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA2),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA3),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA4),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA5),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA6),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA7),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA8),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA9),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA10),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA11),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA12),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA13),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA14),
+	IMX_PINCTRL_PIN(MX27_PAD_I2C_DATA),
+	IMX_PINCTRL_PIN(MX27_PAD_I2C_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS2),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS1),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SS0),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI2_SCLK),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI2_MISO),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI2_MOSI),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI1_RDY),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS2),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS1),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SS0),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI1_SCLK),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI1_MISO),
+	IMX_PINCTRL_PIN(MX27_PAD_CSPI1_MOSI),
+
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_NXT),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_STP),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DIR),
+	IMX_PINCTRL_PIN(MX27_PAD_UART2_CTS),
+	IMX_PINCTRL_PIN(MX27_PAD_UART2_RTS),
+	IMX_PINCTRL_PIN(MX27_PAD_PWMO),
+	IMX_PINCTRL_PIN(MX27_PAD_UART2_TXD),
+	IMX_PINCTRL_PIN(MX27_PAD_UART2_RXD),
+	IMX_PINCTRL_PIN(MX27_PAD_UART3_TXD),
+	IMX_PINCTRL_PIN(MX27_PAD_UART3_RXD),
+	IMX_PINCTRL_PIN(MX27_PAD_UART3_CTS),
+	IMX_PINCTRL_PIN(MX27_PAD_UART3_RTS),
+	IMX_PINCTRL_PIN(MX27_PAD_UART1_TXD),
+	IMX_PINCTRL_PIN(MX27_PAD_UART1_RXD),
+	IMX_PINCTRL_PIN(MX27_PAD_UART1_CTS),
+	IMX_PINCTRL_PIN(MX27_PAD_UART1_RTS),
+	IMX_PINCTRL_PIN(MX27_PAD_RTCK),
+	IMX_PINCTRL_PIN(MX27_PAD_RESET_OUT_B),
+	IMX_PINCTRL_PIN(MX27_PAD_SD1_D0),
+	IMX_PINCTRL_PIN(MX27_PAD_SD1_D1),
+	IMX_PINCTRL_PIN(MX27_PAD_SD1_D2),
+	IMX_PINCTRL_PIN(MX27_PAD_SD1_D3),
+	IMX_PINCTRL_PIN(MX27_PAD_SD1_CMD),
+	IMX_PINCTRL_PIN(MX27_PAD_SD1_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_CLK),
+	IMX_PINCTRL_PIN(MX27_PAD_USBOTG_DATA7),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED9),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED10),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED11),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED12),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED13),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED14),
+
+	IMX_PINCTRL_PIN(MX27_PAD_NFRB),
+	IMX_PINCTRL_PIN(MX27_PAD_NFCLE),
+	IMX_PINCTRL_PIN(MX27_PAD_NFWP_B),
+	IMX_PINCTRL_PIN(MX27_PAD_NFCE_B),
+	IMX_PINCTRL_PIN(MX27_PAD_NFALE),
+	IMX_PINCTRL_PIN(MX27_PAD_NFRE_B),
+	IMX_PINCTRL_PIN(MX27_PAD_NFWE_B),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_POE),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_RW_B),
+	IMX_PINCTRL_PIN(MX27_PAD_IOIS16),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_RST),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_BVD2),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_BVD1),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_VS2),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_VS1),
+	IMX_PINCTRL_PIN(MX27_PAD_CLKO),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_PWRON),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_READY),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_WAIT_B),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_CD2_B),
+	IMX_PINCTRL_PIN(MX27_PAD_PC_CD1_B),
+	IMX_PINCTRL_PIN(MX27_PAD_CS4_B),
+	IMX_PINCTRL_PIN(MX27_PAD_CS5_B),
+	IMX_PINCTRL_PIN(MX27_PAD_ATA_DATA15),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED15),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED16),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED17),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED18),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED19),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED20),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED21),
+	IMX_PINCTRL_PIN(MX27_PAD_UNUSED22),
+};
+
+static struct imx1_pinctrl_soc_info imx27_pinctrl_info = {
+	.pins = imx27_pinctrl_pads,
+	.npins = ARRAY_SIZE(imx27_pinctrl_pads),
+};
+
+static struct of_device_id imx27_pinctrl_of_match[] = {
+	{ .compatible = "fsl,imx27-iomuxc", },
+	{ /* sentinel */ }
+};
+
+struct imx27_pinctrl_private {
+	int num_gpio_childs;
+	struct platform_device **gpio_dev;
+	struct mxc_gpio_platform_data *gpio_pdata;
+};
+
+static int imx27_pinctrl_probe(struct platform_device *pdev)
+{
+	return imx1_pinctrl_core_probe(pdev, &imx27_pinctrl_info);
+}
+
+static struct platform_driver imx27_pinctrl_driver = {
+	.driver = {
+		.name = "imx27-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(imx27_pinctrl_of_match),
+	},
+	.probe = imx27_pinctrl_probe,
+	.remove = imx1_pinctrl_core_remove,
+};
+
+static int __init imx27_pinctrl_init(void)
+{
+	return platform_driver_register(&imx27_pinctrl_driver);
+}
+arch_initcall(imx27_pinctrl_init);
+
+static void __exit imx27_pinctrl_exit(void)
+{
+	platform_driver_unregister(&imx27_pinctrl_driver);
+}
+module_exit(imx27_pinctrl_exit);
+MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
+MODULE_DESCRIPTION("Freescale IMX27 pinctrl driver");
+MODULE_LICENSE("GPL v2");