diff mbox

[PATCHv9,11/43] CLK: TI: add support for gate clock

Message ID 1382716658-6964-12-git-send-email-t-kristo@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tero Kristo Oct. 25, 2013, 3:57 p.m. UTC
This patch adds support for TI specific gate clocks. These behave as basic
gate-clock, but have different ops / hw-ops for controlling the actual
gate, for example waiting until the clock is ready. Several sub-types
are supported:
- ti,gate-clock: basic gate clock with default ops/hwops
- ti,clkdm-gate-clock: clockdomain level gate control
- ti,dss-gate-clock: gate clock with DSS specific hardware handling
- ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling
- ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 .../devicetree/bindings/clock/ti/gate.txt          |   77 ++++++
 arch/arm/mach-omap2/clock.h                        |   29 ---
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/gate.c                              |  258 ++++++++++++++++++++
 include/linux/clk/ti.h                             |   36 +++
 5 files changed, 372 insertions(+), 30 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/gate.txt
 create mode 100644 drivers/clk/ti/gate.c

Comments

Nishanth Menon Nov. 1, 2013, 8:11 p.m. UTC | #1
On 10/25/2013 10:57 AM, Tero Kristo wrote:
> This patch adds support for TI specific gate clocks. These behave as basic
> gate-clock, but have different ops / hw-ops for controlling the actual
> gate, for example waiting until the clock is ready. Several sub-types
> are supported:
> - ti,gate-clock: basic gate clock with default ops/hwops
> - ti,clkdm-gate-clock: clockdomain level gate control
> - ti,dss-gate-clock: gate clock with DSS specific hardware handling
> - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling
> - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling
> 
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
>  .../devicetree/bindings/clock/ti/gate.txt          |   77 ++++++
>  arch/arm/mach-omap2/clock.h                        |   29 ---
>  drivers/clk/ti/Makefile                            |    2 +-
>  drivers/clk/ti/gate.c                              |  258 ++++++++++++++++++++
>  include/linux/clk/ti.h                             |   36 +++
>  5 files changed, 372 insertions(+), 30 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/ti/gate.txt
>  create mode 100644 drivers/clk/ti/gate.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
> new file mode 100644
> index 0000000..18c4d86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
> @@ -0,0 +1,77 @@
> +Binding for Texas Instruments gate clock.
> +
> +Binding status: Unstable - ABI compatibility may be broken in the future
> +
> +This binding uses the common clock binding[1]. This clock is
> +quite much similar to the basic gate-clock [2], however,
> +it supports a number of additional features. If no register
> +is provided for this clock, the code assumes that a clockdomain
> +will be controlled instead and the corresponding hw-ops for
> +that is used.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/clock/gate-clock.txt
> +[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt

i think you may want to sequence patch #12 before this if you would
like to refer to this.

> +
> +Required properties:
> +- compatible : shall be one of:
> +  "ti,gate-clock" - basic gate clock
> +  "ti,wait-gate-clock" - gate clock which waits until clock is active before
> +			 returning from clk_enable()
an example will be nice for this.

[...]
> diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
> new file mode 100644
> index 0000000..1a201f8
> --- /dev/null
> +++ b/drivers/clk/ti/gate.c

[...]
> +/**
> + * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
> + *         from HSDivider PWRDN problem Implements Errata ID: i556.
> + * @clk: DPLL output struct clk
> + *
> + * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
> + * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
> + * valueafter their respective PWRDN bits are set.  Any dummy write
> + * (Any other value different from the Read value) to the
> + * corresponding CM_CLKSEL register will refresh the dividers.
> + */
> +static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
> +{
> +	struct clk_divider *parent;
> +	struct clk_hw *parent_hw;
> +	u32 dummy_v, orig_v;
> +	int ret;
> +
> +	/* Clear PWRDN bit of HSDIVIDER */
> +	ret = omap2_dflt_clk_enable(clk);
> +
> +	/* Parent is the x2 node, get parent of parent for the m2 div */
> +	parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
> +	parent = to_clk_divider(parent_hw);
> +
> +	/* Restore the dividers */
> +	if (!ret) {
> +		orig_v = __raw_readl(parent->reg);
> +		dummy_v = orig_v;
> +
> +		/* Write any other value different from the Read value */
> +		dummy_v ^= (1 << parent->shift);
> +		__raw_writel(dummy_v, parent->reg);
> +
> +		/* Write the original divider */
> +		__raw_writel(orig_v, parent->reg);

i think we already did state that these need to be regmap_updatebits..

> +	}
> +
> +	return ret;
> +}
> +
> +static int __init _of_ti_gate_clk_setup(struct device_node *node,
> +					const struct clk_ops *ops,
> +					const struct clk_hw_omap_ops *hw_ops,
> +					struct regmap *regmap)
> +{
> +	struct clk *clk;
> +	struct clk_init_data init = { NULL };
> +	struct clk_hw_omap *clk_hw;
> +	const char *clk_name = node->name;
> +	const char *parent_name;
> +	u32 val;
> +
> +	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
> +	if (!clk_hw) {
> +		pr_err("%s: could not allocate clk_hw_omap\n", __func__);
> +		return -ENOMEM;
> +	}
> +
> +	clk_hw->hw.init = &init;
> +
> +	of_property_read_string(node, "clock-output-names", &clk_name);
> +
> +	init.name = clk_name;
> +	init.ops = ops;
> +
> +	if (!of_property_read_u32(node, "reg", &val))
> +		clk_hw->enable_reg = (void *)val;

seems reg is a mandatory as per bindings for everything other than
ti,clkdm-gate-clock.. no error handling?

> +
> +	clk_hw->regmap = regmap;
> +
> +	if (!of_property_read_u32(node, "ti,bit-shift", &val))
> +		clk_hw->enable_bit = val;

Again -> bindings state this is mandatory for non ti,clkdm-gate-clock
clocks. no error handling?

> +	clk_hw->ops = hw_ops;
> +
> +	parent_name = of_clk_get_parent_name(node, 0);
> +	init.parent_names = &parent_name;
> +	init.num_parents = 1;

error checks for parent clk which seems to be mandatory?

> +
> +	if (of_property_read_bool(node, "ti,set-rate-parent"))
> +		init.flags |= CLK_SET_RATE_PARENT;
> +
> +	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
> +		clk_hw->flags |= INVERT_ENABLE;
> +
> +	clk = clk_register(NULL, &clk_hw->hw);
> +
> +	if (!IS_ERR(clk)) {
> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +		return 0;
> +	}
> +

free(clk_hw)?

> +	return PTR_ERR(clk);
> +}
> +
Tero Kristo Nov. 4, 2013, 12:23 p.m. UTC | #2
On 11/01/2013 10:11 PM, Nishanth Menon wrote:
> On 10/25/2013 10:57 AM, Tero Kristo wrote:
>> This patch adds support for TI specific gate clocks. These behave as basic
>> gate-clock, but have different ops / hw-ops for controlling the actual
>> gate, for example waiting until the clock is ready. Several sub-types
>> are supported:
>> - ti,gate-clock: basic gate clock with default ops/hwops
>> - ti,clkdm-gate-clock: clockdomain level gate control
>> - ti,dss-gate-clock: gate clock with DSS specific hardware handling
>> - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling
>> - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>>   .../devicetree/bindings/clock/ti/gate.txt          |   77 ++++++
>>   arch/arm/mach-omap2/clock.h                        |   29 ---
>>   drivers/clk/ti/Makefile                            |    2 +-
>>   drivers/clk/ti/gate.c                              |  258 ++++++++++++++++++++
>>   include/linux/clk/ti.h                             |   36 +++
>>   5 files changed, 372 insertions(+), 30 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/clock/ti/gate.txt
>>   create mode 100644 drivers/clk/ti/gate.c
>>
>> diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
>> new file mode 100644
>> index 0000000..18c4d86
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
>> @@ -0,0 +1,77 @@
>> +Binding for Texas Instruments gate clock.
>> +
>> +Binding status: Unstable - ABI compatibility may be broken in the future
>> +
>> +This binding uses the common clock binding[1]. This clock is
>> +quite much similar to the basic gate-clock [2], however,
>> +it supports a number of additional features. If no register
>> +is provided for this clock, the code assumes that a clockdomain
>> +will be controlled instead and the corresponding hw-ops for
>> +that is used.
>> +
>> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +[2] Documentation/devicetree/bindings/clock/gate-clock.txt
>> +[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
>
> i think you may want to sequence patch #12 before this if you would
> like to refer to this.

Yea, can re-order based on this. Compiler doesn't really catch issues 
like this. :)

>
>> +
>> +Required properties:
>> +- compatible : shall be one of:
>> +  "ti,gate-clock" - basic gate clock
>> +  "ti,wait-gate-clock" - gate clock which waits until clock is active before
>> +			 returning from clk_enable()
> an example will be nice for this.

Will add.

>
> [...]
>> diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
>> new file mode 100644
>> index 0000000..1a201f8
>> --- /dev/null
>> +++ b/drivers/clk/ti/gate.c
>
> [...]
>> +/**
>> + * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
>> + *         from HSDivider PWRDN problem Implements Errata ID: i556.
>> + * @clk: DPLL output struct clk
>> + *
>> + * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
>> + * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
>> + * valueafter their respective PWRDN bits are set.  Any dummy write
>> + * (Any other value different from the Read value) to the
>> + * corresponding CM_CLKSEL register will refresh the dividers.
>> + */
>> +static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
>> +{
>> +	struct clk_divider *parent;
>> +	struct clk_hw *parent_hw;
>> +	u32 dummy_v, orig_v;
>> +	int ret;
>> +
>> +	/* Clear PWRDN bit of HSDIVIDER */
>> +	ret = omap2_dflt_clk_enable(clk);
>> +
>> +	/* Parent is the x2 node, get parent of parent for the m2 div */
>> +	parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
>> +	parent = to_clk_divider(parent_hw);
>> +
>> +	/* Restore the dividers */
>> +	if (!ret) {
>> +		orig_v = __raw_readl(parent->reg);
>> +		dummy_v = orig_v;
>> +
>> +		/* Write any other value different from the Read value */
>> +		dummy_v ^= (1 << parent->shift);
>> +		__raw_writel(dummy_v, parent->reg);
>> +
>> +		/* Write the original divider */
>> +		__raw_writel(orig_v, parent->reg);
>
> i think we already did state that these need to be regmap_updatebits..

Yea.

>
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int __init _of_ti_gate_clk_setup(struct device_node *node,
>> +					const struct clk_ops *ops,
>> +					const struct clk_hw_omap_ops *hw_ops,
>> +					struct regmap *regmap)
>> +{
>> +	struct clk *clk;
>> +	struct clk_init_data init = { NULL };
>> +	struct clk_hw_omap *clk_hw;
>> +	const char *clk_name = node->name;
>> +	const char *parent_name;
>> +	u32 val;
>> +
>> +	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
>> +	if (!clk_hw) {
>> +		pr_err("%s: could not allocate clk_hw_omap\n", __func__);
>> +		return -ENOMEM;
>> +	}
>> +
>> +	clk_hw->hw.init = &init;
>> +
>> +	of_property_read_string(node, "clock-output-names", &clk_name);
>> +
>> +	init.name = clk_name;
>> +	init.ops = ops;
>> +
>> +	if (!of_property_read_u32(node, "reg", &val))
>> +		clk_hw->enable_reg = (void *)val;
>
> seems reg is a mandatory as per bindings for everything other than
> ti,clkdm-gate-clock.. no error handling?

Will add.

>
>> +
>> +	clk_hw->regmap = regmap;
>> +
>> +	if (!of_property_read_u32(node, "ti,bit-shift", &val))
>> +		clk_hw->enable_bit = val;
>
> Again -> bindings state this is mandatory for non ti,clkdm-gate-clock
> clocks. no error handling?

Will add.

>
>> +	clk_hw->ops = hw_ops;
>> +
>> +	parent_name = of_clk_get_parent_name(node, 0);
>> +	init.parent_names = &parent_name;
>> +	init.num_parents = 1;
>
> error checks for parent clk which seems to be mandatory?

Will add.

>
>> +
>> +	if (of_property_read_bool(node, "ti,set-rate-parent"))
>> +		init.flags |= CLK_SET_RATE_PARENT;
>> +
>> +	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
>> +		clk_hw->flags |= INVERT_ENABLE;
>> +
>> +	clk = clk_register(NULL, &clk_hw->hw);
>> +
>> +	if (!IS_ERR(clk)) {
>> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
>> +		return 0;
>> +	}
>> +
>
> free(clk_hw)?

Hmm yea, missing.

>
>> +	return PTR_ERR(clk);
>> +}
>> +
>
>
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
new file mode 100644
index 0000000..18c4d86
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -0,0 +1,77 @@ 
+Binding for Texas Instruments gate clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features. If no register
+is provided for this clock, the code assumes that a clockdomain
+will be controlled instead and the corresponding hw-ops for
+that is used.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,gate-clock" - basic gate clock
+  "ti,wait-gate-clock" - gate clock which waits until clock is active before
+			 returning from clk_enable()
+  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
+  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
+  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
+			  clock directly from a clockdomain, see [3] how
+			  to map clockdomains properly
+  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
+			  required for a hardware errata
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable gate, not needed for
+	ti,clkdm-gate-clock type
+- ti,bit-shift : bit shift for programming the clock gate, not needed for
+		 ti,clkdm-gate-clock type
+
+Optional properties:
+- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
+  gates the clock and clearing the bit ungates the clock.
+
+Examples:
+	mmchs2_fck: mmchs2_fck@48004a00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x48004a00 0x4>;
+		ti,bit-shift = <25>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		reg = <0x48004e00 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	emac_ick: emac_ick@4800259c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x4800259c 0x4>;
+		ti,bit-shift = <1>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x48004d00 0x4>;
+		ti,set-bit-to-disable;
+	};
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 079536a..08b3360 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -179,25 +179,6 @@  struct clksel {
 	const struct clksel_rate *rates;
 };
 
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
-
 struct clk_hw_omap_ops {
 	void			(*find_idlest)(struct clk_hw_omap *oclk,
 					void __iomem **idlest_reg,
@@ -260,9 +241,6 @@  extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
 
 unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
 
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
 				   void __iomem **other_reg,
 				   u8 *other_bit);
@@ -291,16 +269,12 @@  extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 extern struct clk dummy_ck;
 
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
-extern const struct clk_hw_omap_ops clkhwops_wait;
 extern const struct clk_hw_omap_ops clkhwops_iclk;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
 extern const struct clk_hw_omap_ops clkhwops_apll54;
 extern const struct clk_hw_omap_ops clkhwops_apll96;
@@ -318,8 +292,5 @@  extern const struct clksel_rate div31_1to31_rates[];
 
 extern int am33xx_clk_init(void);
 
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
 extern void omap_clocks_register(struct omap_clk *oclks, int cnt);
 #endif
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index f57fc4b..7cba389 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,4 @@ 
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o composite.o
+					   fixed-factor.o gate.o composite.o
 endif
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
new file mode 100644
index 0000000..1a201f8
--- /dev/null
+++ b/drivers/clk/ti/gate.c
@@ -0,0 +1,258 @@ 
+/*
+ * OMAP gate clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk);
+
+static const struct clk_ops omap_gate_clkdm_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_clkops_enable_clkdm,
+	.disable	= &omap2_clkops_disable_clkdm,
+};
+
+static const struct clk_ops omap_gate_clk_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap2_dflt_clk_enable,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = {
+	.init		= &omap2_init_clk_clkdm,
+	.enable		= &omap36xx_gate_clk_enable_with_hsdiv_restore,
+	.disable	= &omap2_dflt_clk_disable,
+	.is_enabled	= &omap2_dflt_clk_is_enabled,
+};
+
+/**
+ * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering
+ *         from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set.  Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
+{
+	struct clk_divider *parent;
+	struct clk_hw *parent_hw;
+	u32 dummy_v, orig_v;
+	int ret;
+
+	/* Clear PWRDN bit of HSDIVIDER */
+	ret = omap2_dflt_clk_enable(clk);
+
+	/* Parent is the x2 node, get parent of parent for the m2 div */
+	parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk)));
+	parent = to_clk_divider(parent_hw);
+
+	/* Restore the dividers */
+	if (!ret) {
+		orig_v = __raw_readl(parent->reg);
+		dummy_v = orig_v;
+
+		/* Write any other value different from the Read value */
+		dummy_v ^= (1 << parent->shift);
+		__raw_writel(dummy_v, parent->reg);
+
+		/* Write the original divider */
+		__raw_writel(orig_v, parent->reg);
+	}
+
+	return ret;
+}
+
+static int __init _of_ti_gate_clk_setup(struct device_node *node,
+					const struct clk_ops *ops,
+					const struct clk_hw_omap_ops *hw_ops,
+					struct regmap *regmap)
+{
+	struct clk *clk;
+	struct clk_init_data init = { NULL };
+	struct clk_hw_omap *clk_hw;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	u32 val;
+
+	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+	if (!clk_hw) {
+		pr_err("%s: could not allocate clk_hw_omap\n", __func__);
+		return -ENOMEM;
+	}
+
+	clk_hw->hw.init = &init;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	init.name = clk_name;
+	init.ops = ops;
+
+	if (!of_property_read_u32(node, "reg", &val))
+		clk_hw->enable_reg = (void *)val;
+
+	clk_hw->regmap = regmap;
+
+	if (!of_property_read_u32(node, "ti,bit-shift", &val))
+		clk_hw->enable_bit = val;
+	clk_hw->ops = hw_ops;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	if (of_property_read_bool(node, "ti,set-rate-parent"))
+		init.flags |= CLK_SET_RATE_PARENT;
+
+	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
+		clk_hw->flags |= INVERT_ENABLE;
+
+	clk = clk_register(NULL, &clk_hw->hw);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return 0;
+	}
+
+	return PTR_ERR(clk);
+}
+
+static int __init _of_ti_composite_gate_clk_setup(struct device_node *node,
+					const struct clk_hw_omap_ops *hw_ops,
+					struct regmap *regmap)
+{
+	struct clk_hw_omap *gate;
+	u32 val = 0;
+	int ret;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return -ENOMEM;
+
+	if (!of_property_read_u32(node, "reg", &val))
+		gate->enable_reg = (void *)val;
+
+	gate->regmap = regmap;
+
+	if (of_property_read_u32(node, "ti,bit-shift", &val)) {
+		pr_debug("%s: missing bit-shift property for %s, default=0\n",
+			 __func__, node->name);
+		val = 0;
+	}
+	gate->enable_bit = val;
+	gate->ops = hw_ops;
+
+	ret = ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE);
+	if (!ret)
+		return 0;
+
+	kfree(gate);
+
+	return ret;
+}
+static int __init
+of_ti_composite_no_wait_gate_clk_setup(struct device_node *node,
+				       struct regmap *regmap)
+{
+	return _of_ti_composite_gate_clk_setup(node, NULL, regmap);
+}
+CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock",
+	       of_ti_composite_no_wait_gate_clk_setup);
+
+static int __init of_ti_composite_interface_clk_setup(struct device_node *node,
+						      struct regmap *regmap)
+{
+	return _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait,
+					       regmap);
+}
+CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock",
+	       of_ti_composite_interface_clk_setup);
+
+static int __init of_ti_composite_gate_clk_setup(struct device_node *node,
+						 struct regmap *regmap)
+{
+	return _of_ti_composite_gate_clk_setup(node, &clkhwops_wait, regmap);
+}
+CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock",
+	       of_ti_composite_gate_clk_setup);
+
+
+static int __init of_ti_clkdm_gate_clk_setup(struct device_node *node,
+					     struct regmap *regmap)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL,
+				     regmap);
+}
+CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock",
+	       of_ti_clkdm_gate_clk_setup);
+
+static int __init of_ti_hsdiv_gate_clk_setup(struct device_node *node,
+					     struct regmap *regmap)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops,
+				     &clkhwops_wait, regmap);
+}
+CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock",
+	       of_ti_hsdiv_gate_clk_setup);
+
+static int __init of_ti_gate_clk_setup(struct device_node *node,
+				       struct regmap *regmap)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL, regmap);
+}
+CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup)
+
+static int __init of_ti_wait_gate_clk_setup(struct device_node *node,
+					    struct regmap *regmap)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait,
+				     regmap);
+}
+CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock",
+	       of_ti_wait_gate_clk_setup);
+
+#ifdef CONFIG_ARCH_OMAP3
+static int __init of_ti_am35xx_gate_clk_setup(struct device_node *node,
+					      struct regmap *regmap)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+				     &clkhwops_am35xx_ipss_module_wait,
+				     regmap);
+}
+CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock",
+	       of_ti_am35xx_gate_clk_setup);
+
+static int __init of_ti_dss_gate_clk_setup(struct device_node *node,
+					   struct regmap *regmap)
+{
+	return _of_ti_gate_clk_setup(node, &omap_gate_clk_ops,
+				     &clkhwops_omap3430es2_dss_usbhost_wait,
+				     regmap);
+}
+CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock",
+	       of_ti_dss_gate_clk_setup);
+#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 96c9725..29baca8 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -129,6 +129,33 @@  struct clk_hw_omap {
 	struct regmap		*regmap;
 };
 
+/*
+ * struct clk_hw_omap.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
+ *     with 32bit ops, by default OMAP1 uses 16bit ops.
+ * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
+ * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
+ *     clock is put to no-idle mode.
+ * ENABLE_ON_INIT: Clock is enabled on init.
+ * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
+ *     disable. This inverts the behavior making '0' enable and '1' disable.
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL      (1 << 1)
+#define CLOCK_NO_IDLE_PARENT    (1 << 2)
+#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2          (1 << 5)
+
 /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
 #define DPLL_LOW_POWER_STOP	0x1
 #define DPLL_LOW_POWER_BYPASS	0x5
@@ -180,8 +207,13 @@  long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 void omap2_init_clk_clkdm(struct clk_hw *clk);
 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 				    unsigned long parent_rate);
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
 			 unsigned long parent_rate);
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, struct regmap *regmap);
@@ -198,5 +230,9 @@  static inline void of_ti_clk_deny_autoidle_all(void) { }
 
 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 
 #endif