| Message ID | 1383335158-19730-10-git-send-email-matt.porter@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Nov 01, 2013 at 11:56:33PM +0300, Sergei Shtylyov wrote: > Hello. > > On 11/01/2013 10:45 PM, Matt Porter wrote: > > >Adds USB OTG/PHY and clock support to BCM281xx and enables > >UDC support on the bcm11351-brt and bcm28155-ap boards. > > >Signed-off-by: Matt Porter <matt.porter@linaro.org> > >Reviewed-by: Markus Mayer <markus.mayer@linaro.org> > >Reviewed-by: Tim Kryger <tim.kryger@linaro.org> > >--- > > arch/arm/boot/dts/bcm11351-brt.dts | 6 ++++++ > > arch/arm/boot/dts/bcm11351.dtsi | 18 ++++++++++++++++++ > > arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++++++ > > 3 files changed, 32 insertions(+) > > [...] > >diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi > >index 0755f43..247f9fd 100644 > >--- a/arch/arm/boot/dts/bcm11351.dtsi > >+++ b/arch/arm/boot/dts/bcm11351.dtsi > >@@ -284,4 +284,22 @@ > > #clock-cells = <0>; > > }; > > }; > >+ > >+ usbotg: usbotg@3f120000 { > > According to ePAPR spec [1], the node name should be "usb@3f120000". Will address in v3. > >+ compatible = "snps,dwc2"; > >+ reg = <0x3f120000 0x10000>; > >+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; > >+ clocks = <&usb_otg_ahb_clk>; > >+ clock-names = "otg"; > >+ phys = <&usbphy>; > >+ phy-names = "usb2-phy"; > >+ status = "disabled"; > >+ }; > >+ > >+ usbphy: usbphy@3f130000 { > > This one should probably be named "usb-phy@3f130000", just like > "ethernet-phy" from the ePAPR spec. Yes, agreed that will follow the same naming convention. I'll roll this in v3. Thanks for the review. -Matt > >+ compatible = "brcm,kona-usb2-phy"; > >+ reg = <0x3f130000 0x28>; > >+ #phy-cells = <0>; > >+ status = "disabled"; > >+ }; > > }; > > [1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf > > WBR, Sergei >
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 9d36eb4..047c635 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -43,5 +43,11 @@ status = "okay"; }; + usbotg@3f120000 { + status = "okay"; + }; + usbphy@3f130000 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 0755f43..247f9fd 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -284,4 +284,22 @@ #clock-cells = <0>; }; }; + + usbotg: usbotg@3f120000 { + compatible = "snps,dwc2"; + reg = <0x3f120000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usbphy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index bc4e62c..8347d1b 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -62,4 +62,12 @@ max-frequency = <48000000>; status = "okay"; }; + + usbotg@3f120000 { + status = "okay"; + }; + + usbphy@3f130000 { + status = "okay"; + }; };