| Message ID | 1383335158-19730-8-git-send-email-matt.porter@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 11/01/2013 08:45 PM, Matt Porter wrote: > Add a binding that describes the Broadcom Kona USB2 PHY found > on the BCM281xx family of SoCs. > > Signed-off-by: Matt Porter <matt.porter@linaro.org> > --- > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > new file mode 100644 > index 0000000..db309e2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > @@ -0,0 +1,15 @@ > +BROADCOM KONA USB2 PHY > + > +Required properties: > + - compatible: brcm,kona-usb2-phy > + - regs: offset and length of the PHY registers > + - #phy-cells: must be 0 > +Refer to phy/phy-bindings.txt for the generic PHY binding properties > + > +Example: > + > + usbphy: usbphy@3f130000 { > + compatible = "brcm,kona-usb2-phy"; > + reg = <0x3f130000 0x28>; I expect 'regs' iso 'reg' in this example. Regards, Arend > + #phy-cells = <0>; > + }; >
On Fri, Nov 01, 2013 at 09:54:10PM +0100, Arend van Spriel wrote: > On 11/01/2013 08:45 PM, Matt Porter wrote: > >Add a binding that describes the Broadcom Kona USB2 PHY found > >on the BCM281xx family of SoCs. > > > >Signed-off-by: Matt Porter <matt.porter@linaro.org> > >--- > > .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ > > 1 file changed, 15 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > > > >diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > >new file mode 100644 > >index 0000000..db309e2 > >--- /dev/null > >+++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt > >@@ -0,0 +1,15 @@ > >+BROADCOM KONA USB2 PHY > >+ > >+Required properties: > >+ - compatible: brcm,kona-usb2-phy > >+ - regs: offset and length of the PHY registers > >+ - #phy-cells: must be 0 > >+Refer to phy/phy-bindings.txt for the generic PHY binding properties > >+ > >+Example: > >+ > >+ usbphy: usbphy@3f130000 { > >+ compatible = "brcm,kona-usb2-phy"; > >+ reg = <0x3f130000 0x28>; > > I expect 'regs' iso 'reg' in this example. Yes, will fix the typo in that property for v3. Thanks, Matt > >+ #phy-cells = <0>; > >+ }; > > > >
diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt new file mode 100644 index 0000000..db309e2 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - regs: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usbphy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + };
Add a binding that describes the Broadcom Kona USB2 PHY found on the BCM281xx family of SoCs. Signed-off-by: Matt Porter <matt.porter@linaro.org> --- .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt