diff mbox

[v11,1/6] ARM: hi3xxx: add board support with device tree

Message ID 1383813691-31587-2-git-send-email-haojian.zhuang@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Haojian Zhuang Nov. 7, 2013, 8:41 a.m. UTC
Add board support with device tree for Hisilicon Hi3620 SoC platform.

Changelog:
v11:
1. Add comments for iotable.

v10:
1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is
only called if .map_io() isn't assigned. Use .map_io() to setup static
IO mapping that is used in clock driver.

v3:
1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init()
is called by default.
2. Remove .init_machine() in DT machine descriptor. Since
of_platform_populate() is called by default in DT mode.

v2:
1. Remove .init_irq() in DT machine descriptor. Since irqchip_init()
is called by default in DT mode.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 .../bindings/arm/hisilicon/hisilicon.txt           | 10 ++++
 arch/arm/Kconfig                                   |  2 +
 arch/arm/Makefile                                  |  1 +
 arch/arm/mach-hi3xxx/Kconfig                       | 12 +++++
 arch/arm/mach-hi3xxx/Makefile                      |  5 ++
 arch/arm/mach-hi3xxx/hi3xxx.c                      | 60 ++++++++++++++++++++++
 6 files changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
 create mode 100644 arch/arm/mach-hi3xxx/Kconfig
 create mode 100644 arch/arm/mach-hi3xxx/Makefile
 create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c

Comments

Dinh Nguyen Nov. 7, 2013, 9:50 a.m. UTC | #1
On 11/7/13 2:41 AM, Haojian Zhuang wrote:
> Add board support with device tree for Hisilicon Hi3620 SoC platform.
>
> Changelog:
> v11:
> 1. Add comments for iotable.
>
> v10:
> 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is
> only called if .map_io() isn't assigned. Use .map_io() to setup static
> IO mapping that is used in clock driver.
>
> v3:
> 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init()
> is called by default.
> 2. Remove .init_machine() in DT machine descriptor. Since
> of_platform_populate() is called by default in DT mode.
>
> v2:
> 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init()
> is called by default in DT mode.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
> ---
>  .../bindings/arm/hisilicon/hisilicon.txt           | 10 ++++
>  arch/arm/Kconfig                                   |  2 +
>  arch/arm/Makefile                                  |  1 +
>  arch/arm/mach-hi3xxx/Kconfig                       | 12 +++++
>  arch/arm/mach-hi3xxx/Makefile                      |  5 ++
>  arch/arm/mach-hi3xxx/hi3xxx.c                      | 60 ++++++++++++++++++++++
>  6 files changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>  create mode 100644 arch/arm/mach-hi3xxx/Kconfig
>  create mode 100644 arch/arm/mach-hi3xxx/Makefile
>  create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c
>
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
> new file mode 100644
> index 0000000..3be60c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
> @@ -0,0 +1,10 @@
> +Hisilicon Platforms Device Tree Bindings
> +----------------------------------------------------
> +
> +Hi3716 Development Board
> +Required root node properties:
> +	- compatible = "hisilicon,hi3716-dkb";
> +
> +Hi4511 Board
> +Required root node properties:
> +	- compatible = "hisilicon,hi3620-hi4511";
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 3f7714d..0118443 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig"
>  
>  source "arch/arm/mach-gemini/Kconfig"
>  
> +source "arch/arm/mach-hi3xxx/Kconfig"
> +
>  source "arch/arm/mach-highbank/Kconfig"
>  
>  source "arch/arm/mach-integrator/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index a37a50f..23fb0b0 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
>  machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
>  machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
>  machine-$(CONFIG_ARCH_GEMINI)		+= gemini
> +machine-$(CONFIG_ARCH_HI3xxx)		+= hi3xxx
>  machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
>  machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
>  machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
> diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig
> new file mode 100644
> index 0000000..68bd26c
> --- /dev/null
> +++ b/arch/arm/mach-hi3xxx/Kconfig
> @@ -0,0 +1,12 @@
> +config ARCH_HI3xxx
> +	bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7
> +	select ARM_AMBA
> +	select ARM_GIC
> +	select ARM_TIMER_SP804
> +	select CACHE_L2X0
> +	select CLKSRC_OF
I think you need COMMON_CLK here.
> +	select GENERIC_CLOCKEVENTS
> +	select PINCTRL
> +	select PINCTRL_SINGLE
> +	help
> +	  Support for Hisilicon Hi36xx/Hi37xx processor family
> diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
> new file mode 100644
> index 0000000..d68ebb3
> --- /dev/null
> +++ b/arch/arm/mach-hi3xxx/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# Makefile for Hisilicon Hi36xx/Hi37xx processors line
> +#
> +
> +obj-y	+= hi3xxx.o
> diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
> new file mode 100644
> index 0000000..925af13
> --- /dev/null
> +++ b/arch/arm/mach-hi3xxx/hi3xxx.c
> @@ -0,0 +1,60 @@
> +/*
> + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine
> + *
> + * Copyright (c) 2012-2013 Hisilicon Ltd.
> + * Copyright (c) 2012-2013 Linaro Ltd.
> + *
> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clocksource.h>
> +#include <linux/irqchip.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +
> +/*
> + * This table is only for optimization. Since ioremap() could always share
> + * the same mapping if it's defined as static IO mapping.
> + *
> + * Without this table, system could also work. The cost is some virtual address
> + * spaces wasted since ioremap() may be called multi times for the same
> + * IO space.
> + */
> +static struct map_desc hi3620_io_desc[] __initdata = {
> +	{
> +		.pfn		= __phys_to_pfn(0xfc802000),
> +		.virtual	= 0xfe802000,
> +		.length		= 0x1000,
> +		.type		= MT_DEVICE,
> +	},
> +};
> +
> +static void __init hi3620_map_io(void)
> +{
> +	debug_ll_io_init();
> +	iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
> +}
> +
> +static void __init hi3xxx_timer_init(void)
> +{
> +	of_clk_init(NULL);
> +	clocksource_of_init();
> +}
Once you have COMMON_CLK, then this function can go away.
> +
> +static const char *hi3xxx_compat[] __initdata = {
> +	"hisilicon,hi3620-hi4511",
> +	NULL,
> +};
> +
> +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
> +	.map_io		= hi3620_map_io,
> +	.init_time	= hi3xxx_timer_init,
.init_time can go away if you have COMMON_CLK.

Dinh
> +	.dt_compat	= hi3xxx_compat,
> +MACHINE_END
Haojian Zhuang Nov. 12, 2013, 8:42 a.m. UTC | #2
On 7 November 2013 17:50, Dinh Nguyen <dinh.linux@gmail.com> wrote:
>
> On 11/7/13 2:41 AM, Haojian Zhuang wrote:
>> Add board support with device tree for Hisilicon Hi3620 SoC platform.
>>
>> Changelog:
>> v11:
>> 1. Add comments for iotable.
>>
>> v10:
>> 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is
>> only called if .map_io() isn't assigned. Use .map_io() to setup static
>> IO mapping that is used in clock driver.
>>
>> v3:
>> 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init()
>> is called by default.
>> 2. Remove .init_machine() in DT machine descriptor. Since
>> of_platform_populate() is called by default in DT mode.
>>
>> v2:
>> 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init()
>> is called by default in DT mode.
>>
>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>> ---
>>  .../bindings/arm/hisilicon/hisilicon.txt           | 10 ++++
>>  arch/arm/Kconfig                                   |  2 +
>>  arch/arm/Makefile                                  |  1 +
>>  arch/arm/mach-hi3xxx/Kconfig                       | 12 +++++
>>  arch/arm/mach-hi3xxx/Makefile                      |  5 ++
>>  arch/arm/mach-hi3xxx/hi3xxx.c                      | 60 ++++++++++++++++++++++
>>  6 files changed, 90 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>>  create mode 100644 arch/arm/mach-hi3xxx/Kconfig
>>  create mode 100644 arch/arm/mach-hi3xxx/Makefile
>>  create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c
>>
>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>> new file mode 100644
>> index 0000000..3be60c8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>> @@ -0,0 +1,10 @@
>> +Hisilicon Platforms Device Tree Bindings
>> +----------------------------------------------------
>> +
>> +Hi3716 Development Board
>> +Required root node properties:
>> +     - compatible = "hisilicon,hi3716-dkb";
>> +
>> +Hi4511 Board
>> +Required root node properties:
>> +     - compatible = "hisilicon,hi3620-hi4511";
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index 3f7714d..0118443 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig"
>>
>>  source "arch/arm/mach-gemini/Kconfig"
>>
>> +source "arch/arm/mach-hi3xxx/Kconfig"
>> +
>>  source "arch/arm/mach-highbank/Kconfig"
>>
>>  source "arch/arm/mach-integrator/Kconfig"
>> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
>> index a37a50f..23fb0b0 100644
>> --- a/arch/arm/Makefile
>> +++ b/arch/arm/Makefile
>> @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110)            += ebsa110
>>  machine-$(CONFIG_ARCH_EP93XX)                += ep93xx
>>  machine-$(CONFIG_ARCH_EXYNOS)                += exynos
>>  machine-$(CONFIG_ARCH_GEMINI)                += gemini
>> +machine-$(CONFIG_ARCH_HI3xxx)                += hi3xxx
>>  machine-$(CONFIG_ARCH_HIGHBANK)              += highbank
>>  machine-$(CONFIG_ARCH_INTEGRATOR)    += integrator
>>  machine-$(CONFIG_ARCH_IOP13XX)               += iop13xx
>> diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig
>> new file mode 100644
>> index 0000000..68bd26c
>> --- /dev/null
>> +++ b/arch/arm/mach-hi3xxx/Kconfig
>> @@ -0,0 +1,12 @@
>> +config ARCH_HI3xxx
>> +     bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7
>> +     select ARM_AMBA
>> +     select ARM_GIC
>> +     select ARM_TIMER_SP804
>> +     select CACHE_L2X0
>> +     select CLKSRC_OF
> I think you need COMMON_CLK here.

Why? COMMON_CLK will be selected if ARCH_MULTIPLATFORM is enabled. Why
do I need to choose it again?

>> +     select GENERIC_CLOCKEVENTS
>> +     select PINCTRL
>> +     select PINCTRL_SINGLE
>> +     help
>> +       Support for Hisilicon Hi36xx/Hi37xx processor family
>> diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
>> new file mode 100644
>> index 0000000..d68ebb3
>> --- /dev/null
>> +++ b/arch/arm/mach-hi3xxx/Makefile
>> @@ -0,0 +1,5 @@
>> +#
>> +# Makefile for Hisilicon Hi36xx/Hi37xx processors line
>> +#
>> +
>> +obj-y        += hi3xxx.o
>> diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
>> new file mode 100644
>> index 0000000..925af13
>> --- /dev/null
>> +++ b/arch/arm/mach-hi3xxx/hi3xxx.c
>> @@ -0,0 +1,60 @@
>> +/*
>> + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine
>> + *
>> + * Copyright (c) 2012-2013 Hisilicon Ltd.
>> + * Copyright (c) 2012-2013 Linaro Ltd.
>> + *
>> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/clocksource.h>
>> +#include <linux/irqchip.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach/map.h>
>> +
>> +/*
>> + * This table is only for optimization. Since ioremap() could always share
>> + * the same mapping if it's defined as static IO mapping.
>> + *
>> + * Without this table, system could also work. The cost is some virtual address
>> + * spaces wasted since ioremap() may be called multi times for the same
>> + * IO space.
>> + */
>> +static struct map_desc hi3620_io_desc[] __initdata = {
>> +     {
>> +             .pfn            = __phys_to_pfn(0xfc802000),
>> +             .virtual        = 0xfe802000,
>> +             .length         = 0x1000,
>> +             .type           = MT_DEVICE,
>> +     },
>> +};
>> +
>> +static void __init hi3620_map_io(void)
>> +{
>> +     debug_ll_io_init();
>> +     iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
>> +}
>> +
>> +static void __init hi3xxx_timer_init(void)
>> +{
>> +     of_clk_init(NULL);
>> +     clocksource_of_init();
>> +}
> Once you have COMMON_CLK, then this function can go away.

On v3.12-rcx, of_clk_init() must be called by platform driver. Now v3.13-rcx
doesn't announce yet. This function will be removed in additional patch, not
in this patch.

>> +
>> +static const char *hi3xxx_compat[] __initdata = {
>> +     "hisilicon,hi3620-hi4511",
>> +     NULL,
>> +};
>> +
>> +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
>> +     .map_io         = hi3620_map_io,
>> +     .init_time      = hi3xxx_timer_init,
> .init_time can go away if you have COMMON_CLK.
>
> Dinh
>> +     .dt_compat      = hi3xxx_compat,
>> +MACHINE_END
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
new file mode 100644
index 0000000..3be60c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -0,0 +1,10 @@ 
+Hisilicon Platforms Device Tree Bindings
+----------------------------------------------------
+
+Hi3716 Development Board
+Required root node properties:
+	- compatible = "hisilicon,hi3716-dkb";
+
+Hi4511 Board
+Required root node properties:
+	- compatible = "hisilicon,hi3620-hi4511";
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3f7714d..0118443 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -946,6 +946,8 @@  source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-hi3xxx/Kconfig"
+
 source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a37a50f..23fb0b0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -155,6 +155,7 @@  machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
+machine-$(CONFIG_ARCH_HI3xxx)		+= hi3xxx
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
 machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig
new file mode 100644
index 0000000..68bd26c
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/Kconfig
@@ -0,0 +1,12 @@ 
+config ARCH_HI3xxx
+	bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select CACHE_L2X0
+	select CLKSRC_OF
+	select GENERIC_CLOCKEVENTS
+	select PINCTRL
+	select PINCTRL_SINGLE
+	help
+	  Support for Hisilicon Hi36xx/Hi37xx processor family
diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
new file mode 100644
index 0000000..d68ebb3
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/Makefile
@@ -0,0 +1,5 @@ 
+#
+# Makefile for Hisilicon Hi36xx/Hi37xx processors line
+#
+
+obj-y	+= hi3xxx.o
diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
new file mode 100644
index 0000000..925af13
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/hi3xxx.c
@@ -0,0 +1,60 @@ 
+/*
+ * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine
+ *
+ * Copyright (c) 2012-2013 Hisilicon Ltd.
+ * Copyright (c) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+/*
+ * This table is only for optimization. Since ioremap() could always share
+ * the same mapping if it's defined as static IO mapping.
+ *
+ * Without this table, system could also work. The cost is some virtual address
+ * spaces wasted since ioremap() may be called multi times for the same
+ * IO space.
+ */
+static struct map_desc hi3620_io_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(0xfc802000),
+		.virtual	= 0xfe802000,
+		.length		= 0x1000,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init hi3620_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
+}
+
+static void __init hi3xxx_timer_init(void)
+{
+	of_clk_init(NULL);
+	clocksource_of_init();
+}
+
+static const char *hi3xxx_compat[] __initdata = {
+	"hisilicon,hi3620-hi4511",
+	NULL,
+};
+
+DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
+	.map_io		= hi3620_map_io,
+	.init_time	= hi3xxx_timer_init,
+	.dt_compat	= hi3xxx_compat,
+MACHINE_END