diff mbox

[7/8] ARM: dts: imx: imx6qdl.dtsi: use IRQ_TYPE_LEVEL_HIGH

Message ID 1384462934-17390-8-git-send-email-troy.kisky@boundarydevices.com (mailing list archive)
State New, archived
Headers show

Commit Message

Troy Kisky Nov. 14, 2013, 9:02 p.m. UTC
Make the interrupts node slightly more readable.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 162 +++++++++++++++++++++++------------------
 1 file changed, 92 insertions(+), 70 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 8a38161..23f63cb 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -75,7 +75,10 @@ 
 		dma_apbh: dma-apbh@00110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
-			interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
@@ -88,7 +91,7 @@ 
 			#size-cells = <1>;
 			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 			reg-names = "gpmi-nand", "bch";
-			interrupts = <0 15 0x04>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "bch";
 			clocks = <&clks 152>, <&clks 153>, <&clks 151>,
 				 <&clks 150>, <&clks 149>;
@@ -109,7 +112,7 @@ 
 		L2: l2-cache@00a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 0x04>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-level = <2>;
 			arm,tag-latency = <4 2 3>;
@@ -126,7 +129,7 @@ 
 				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
-			interrupts = <0 123 0x04>;
+			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
 			clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
 			status = "disabled";
@@ -134,7 +137,7 @@ 
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 94 0x04>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		aips-bus@02000000 { /* AIPS1 */
@@ -154,7 +157,7 @@ 
 				spdif: spdif@02004000 {
 					compatible = "fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 0x04>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 14 18 0>,
 					       <&sdma 15 18 0>;
 					dma-names = "rx", "tx";
@@ -176,7 +179,7 @@ 
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 0x04>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 112>, <&clks 112>;
 					clock-names = "ipg", "per";
 					status = "disabled";
@@ -187,7 +190,7 @@ 
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 0x04>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 113>, <&clks 113>;
 					clock-names = "ipg", "per";
 					status = "disabled";
@@ -198,7 +201,7 @@ 
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 0x04>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 114>, <&clks 114>;
 					clock-names = "ipg", "per";
 					status = "disabled";
@@ -209,7 +212,7 @@ 
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
 					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 0x04>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 115>, <&clks 115>;
 					clock-names = "ipg", "per";
 					status = "disabled";
@@ -218,7 +221,7 @@ 
 				uart1: serial@02020000 {
 					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 0x04>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 160>, <&clks 161>;
 					clock-names = "ipg", "per";
 					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
@@ -228,13 +231,13 @@ 
 
 				esai: esai@02024000 {
 					reg = <0x02024000 0x4000>;
-					interrupts = <0 51 0x04>;
+					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				ssi1: ssi@02028000 {
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 0x04>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 178>;
 					dmas = <&sdma 37 1 0>,
 					       <&sdma 38 1 0>;
@@ -247,7 +250,7 @@ 
 				ssi2: ssi@0202c000 {
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 0x04>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 179>;
 					dmas = <&sdma 41 1 0>,
 					       <&sdma 42 1 0>;
@@ -260,7 +263,7 @@ 
 				ssi3: ssi@02030000 {
 					compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
 					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 0x04>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks 180>;
 					dmas = <&sdma 45 1 0>,
 					       <&sdma 46 1 0>;
@@ -272,7 +275,7 @@ 
 
 				asrc: asrc@02034000 {
 					reg = <0x02034000 0x4000>;
-					interrupts = <0 50 0x04>;
+					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
 				spba@0203c000 {
@@ -282,7 +285,8 @@ 
 
 			vpu: vpu@02040000 {
 				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 0x04 0 12 0x04>;
+				interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
+				             <0 12 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			aipstz@0207c000 { /* AIPSTZ1 */
@@ -293,7 +297,7 @@ 
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 0x04>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 145>;
 				clock-names = "ipg", "per";
 			};
@@ -302,7 +306,7 @@ 
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 0x04>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 146>;
 				clock-names = "ipg", "per";
 			};
@@ -311,7 +315,7 @@ 
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 0x04>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 147>;
 				clock-names = "ipg", "per";
 			};
@@ -320,7 +324,7 @@ 
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 0x04>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 62>, <&clks 148>;
 				clock-names = "ipg", "per";
 			};
@@ -328,7 +332,7 @@ 
 			can1: flexcan@02090000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02090000 0x4000>;
-				interrupts = <0 110 0x04>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 108>, <&clks 109>;
 				clock-names = "ipg", "per";
 				status = "disabled";
@@ -337,7 +341,7 @@ 
 			can2: flexcan@02094000 {
 				compatible = "fsl,imx6q-flexcan";
 				reg = <0x02094000 0x4000>;
-				interrupts = <0 111 0x04>;
+				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 110>, <&clks 111>;
 				clock-names = "ipg", "per";
 				status = "disabled";
@@ -346,7 +350,7 @@ 
 			gpt: gpt@02098000 {
 				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
 				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 0x04>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 119>, <&clks 120>;
 				clock-names = "ipg", "per";
 			};
@@ -354,7 +358,8 @@ 
 			gpio1: gpio@0209c000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 0x04 0 67 0x04>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -364,7 +369,8 @@ 
 			gpio2: gpio@020a0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 0x04 0 69 0x04>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -374,7 +380,8 @@ 
 			gpio3: gpio@020a4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 0x04 0 71 0x04>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -384,7 +391,8 @@ 
 			gpio4: gpio@020a8000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 0x04 0 73 0x04>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -394,7 +402,8 @@ 
 			gpio5: gpio@020ac000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 0x04 0 75 0x04>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -404,7 +413,8 @@ 
 			gpio6: gpio@020b0000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b0000 0x4000>;
-				interrupts = <0 76 0x04 0 77 0x04>;
+				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 77 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -414,7 +424,8 @@ 
 			gpio7: gpio@020b4000 {
 				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
 				reg = <0x020b4000 0x4000>;
-				interrupts = <0 78 0x04 0 79 0x04>;
+				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 79 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -423,20 +434,20 @@ 
 
 			kpp: kpp@020b8000 {
 				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 0x04>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 0x04>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 0>;
 			};
 
 			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 0x04>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 0>;
 				status = "disabled";
 			};
@@ -444,14 +455,17 @@ 
 			clks: ccm@020c4000 {
 				compatible = "fsl,imx6q-ccm";
 				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 0x04 0 88 0x04>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 			};
 
 			anatop: anatop@020c8000 {
 				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
 				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
 				regulator-1p1@110 {
 					compatible = "fsl,anatop-regulator";
@@ -549,7 +563,7 @@ 
 
 			tempmon: tempmon {
 				compatible = "fsl,imx6q-tempmon";
-				interrupts = <0 49 0x04>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 				fsl,tempmon = <&anatop>;
 				fsl,tempmon-data = <&ocotp>;
 			};
@@ -557,14 +571,14 @@ 
 			usbphy1: usbphy@020c9000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 0x04>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 182>;
 			};
 
 			usbphy2: usbphy@020ca000 {
 				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 0x04>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 183>;
 			};
 
@@ -577,31 +591,34 @@ 
 				snvs-rtc-lp@34 {
 					compatible = "fsl,sec-v4.0-mon-rtc-lp";
 					reg = <0x34 0x58>;
-					interrupts = <0 19 0x04 0 20 0x04>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 			};
 
 			epit1: epit@020d0000 { /* EPIT1 */
 				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 0x04>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			epit2: epit@020d4000 { /* EPIT2 */
 				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 0x04>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			src: src@020d8000 {
 				compatible = "fsl,imx6q-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 0x04 0 96 0x04>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
 
 			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
-				interrupts = <0 89 0x04 0 90 0x04>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			gpr: iomuxc-gpr@020e0000 {
@@ -634,18 +651,18 @@ 
 
 			dcic1: dcic@020e4000 {
 				reg = <0x020e4000 0x4000>;
-				interrupts = <0 124 0x04>;
+				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			dcic2: dcic@020e8000 {
 				reg = <0x020e8000 0x4000>;
-				interrupts = <0 125 0x04>;
+				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			sdma: sdma@020ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 0x04>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 155>, <&clks 155>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
@@ -662,7 +679,8 @@ 
 
 			caam@02100000 {
 				reg = <0x02100000 0x40000>;
-				interrupts = <0 105 0x04 0 106 0x04>;
+				interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 106 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			aipstz@0217c000 { /* AIPSTZ2 */
@@ -672,7 +690,7 @@ 
 			usbotg: usb@02184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
-				interrupts = <0 43 0x04>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
@@ -682,7 +700,7 @@ 
 			usbh1: usb@02184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
-				interrupts = <0 40 0x04>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
@@ -692,7 +710,7 @@ 
 			usbh2: usb@02184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
-				interrupts = <0 41 0x04>;
+				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
@@ -701,7 +719,7 @@ 
 			usbh3: usb@02184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
-				interrupts = <0 42 0x04>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 162>;
 				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
@@ -717,7 +735,8 @@ 
 			fec: ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
-				interrupts = <0 118 0x04 0 119 0x04>;
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
@@ -725,13 +744,15 @@ 
 
 			mlb@0218c000 {
 				reg = <0x0218c000 0x4000>;
-				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+				interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 0x04>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -741,7 +762,7 @@ 
 			usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 0x04>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -751,7 +772,7 @@ 
 			usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 0x04>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -761,7 +782,7 @@ 
 			usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 0x04>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
@@ -773,7 +794,7 @@ 
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 0x04>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 125>;
 				status = "disabled";
 			};
@@ -783,7 +804,7 @@ 
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 0x04>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 126>;
 				status = "disabled";
 			};
@@ -793,7 +814,7 @@ 
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
 				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 0x04>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 127>;
 				status = "disabled";
 			};
@@ -814,7 +835,7 @@ 
 			weim: weim@021b8000 {
 				compatible = "fsl,imx6q-weim";
 				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 0x04>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 196>;
 			};
 
@@ -825,12 +846,12 @@ 
 
 			tzasc@021d0000 { /* TZASC1 */
 				reg = <0x021d0000 0x4000>;
-				interrupts = <0 108 0x04>;
+				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			tzasc@021d4000 { /* TZASC2 */
 				reg = <0x021d4000 0x4000>;
-				interrupts = <0 109 0x04>;
+				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			audmux: audmux@021d8000 {
@@ -849,13 +870,13 @@ 
 
 			vdoa@021e4000 {
 				reg = <0x021e4000 0x4000>;
-				interrupts = <0 18 0x04>;
+				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			uart2: serial@021e8000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021e8000 0x4000>;
-				interrupts = <0 27 0x04>;
+				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
@@ -866,7 +887,7 @@ 
 			uart3: serial@021ec000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021ec000 0x4000>;
-				interrupts = <0 28 0x04>;
+				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
@@ -877,7 +898,7 @@ 
 			uart4: serial@021f0000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f0000 0x4000>;
-				interrupts = <0 29 0x04>;
+				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
@@ -888,7 +909,7 @@ 
 			uart5: serial@021f4000 {
 				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
-				interrupts = <0 30 0x04>;
+				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks 160>, <&clks 161>;
 				clock-names = "ipg", "per";
 				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
@@ -901,7 +922,8 @@ 
 			#crtc-cells = <1>;
 			compatible = "fsl,imx6q-ipu";
 			reg = <0x02400000 0x400000>;
-			interrupts = <0 6 0x4 0 5 0x4>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks 130>, <&clks 131>, <&clks 132>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;