diff mbox

[8/8] ARM: dts: imx: sabrelite: add dualLite support

Message ID 1384462934-17390-9-git-send-email-troy.kisky@boundarydevices.com (mailing list archive)
State New, archived
Headers show

Commit Message

Troy Kisky Nov. 14, 2013, 9:02 p.m. UTC
This makes the structure of imx6qdl-sabrelite.dtsi the same
as imx6qdl-sabresd.dtsi so that they are easier to compare.

It also adds the file imx6dl-sabrelite.dts for dualLite
support.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
---
 arch/arm/boot/dts/Makefile               |   1 +
 arch/arm/boot/dts/imx6dl-sabrelite.dts   |  20 +++
 arch/arm/boot/dts/imx6q-sabrelite.dts    | 214 +----------------------------
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 226 +++++++++++++++++++++++++++++++
 4 files changed, 248 insertions(+), 213 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-sabrelite.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b14bb11..743fbd8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -144,6 +144,7 @@  dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-gw53xx.dtb \
 	imx6dl-gw54xx.dtb \
 	imx6dl-sabreauto.dtb \
+	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-wandboard.dtb \
 	imx6q-arm2.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
new file mode 100644
index 0000000..2de0447
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -0,0 +1,20 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Lite Board";
+	compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index b5f0edd..96e4688 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -12,225 +12,13 @@ 
 
 /dts-v1/;
 #include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
 
 / {
 	model = "Freescale i.MX6 Quad SABRE Lite Board";
 	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-};
-
-&ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-sabrelite {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
-				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <MX6QDL_AUDMUX_PINGRP1>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <MX6QDL_ECSPI1_PINGRP1>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <MX6QDL_ENET_PINGRP1>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <MX6QDL_I2C1_PINGRP1>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <MX6QDL_UART2_PINGRP1>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <MX6QDL_USDHC4_PINGRP_D4>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
 };
 
 &sata {
 	status = "okay";
 };
-
-&ssi1 {
-	fsl,mode = "i2s-slave";
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
-	wp-gpios = <&gpio2 7 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 0000000..2797566
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,226 @@ 
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-sabrelite {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <MX6QDL_AUDMUX_PINGRP1>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <MX6QDL_ECSPI1_PINGRP1>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <MX6QDL_ENET_PINGRP1>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <MX6QDL_I2C1_PINGRP1>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <MX6QDL_UART2_PINGRP1>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <MX6QDL_USDHC4_PINGRP_D4>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 0>;
+	wp-gpios = <&gpio2 7 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};