diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
new file mode 100644
index 0000000..1bc34c7
--- /dev/null
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -0,0 +1,84 @@
+/*
+ * linux/arch/arm/mach-vexpress/mcpm_platsmp.c
+ *
+ * Created by:  Nicolas Pitre, November 2012
+ * Copyright:   (C) 2012-2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Code to handle secondary CPU bringup and hotplug for the cluster power API.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+
+#include <asm/mcpm.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+
+static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned int mpidr, pcpu, pcluster, ret;
+	extern void secondary_startup(void);
+
+	mpidr = cpu_logical_map(cpu);
+	pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n",
+		 __func__, cpu, pcpu, pcluster);
+
+	mcpm_set_entry_vector(pcpu, pcluster, NULL);
+	ret = mcpm_cpu_power_up(pcpu, pcluster);
+	if (ret)
+		return ret;
+	mcpm_set_entry_vector(pcpu, pcluster, secondary_startup);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+	dsb_sev();
+	return 0;
+}
+
+static void mcpm_secondary_init(unsigned int cpu)
+{
+	mcpm_cpu_powered_up();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int mcpm_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * We assume all CPUs may be shut down.
+	 * This would be the hook to use for eventual Secure
+	 * OS migration requests as described in the PSCI spec.
+	 */
+	return 0;
+}
+
+static void mcpm_cpu_die(unsigned int cpu)
+{
+	unsigned int mpidr, pcpu, pcluster;
+	mpidr = read_cpuid_mpidr();
+	pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	mcpm_set_entry_vector(pcpu, pcluster, NULL);
+	mcpm_cpu_power_down();
+}
+
+#endif
+
+static struct smp_operations __initdata mcpm_smp_ops = {
+	.smp_boot_secondary	= mcpm_boot_secondary,
+	.smp_secondary_init	= mcpm_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable		= mcpm_cpu_disable,
+	.cpu_die		= mcpm_cpu_die,
+#endif
+};
+
+void __init mcpm_smp_set_ops(void)
+{
+	smp_set_ops(&mcpm_smp_ops);
+}
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
new file mode 100644
index 0000000..e406d57
--- /dev/null
+++ b/arch/arm/include/asm/arch_timer.h
@@ -0,0 +1,105 @@
+#ifndef __ASMARM_ARCH_TIMER_H
+#define __ASMARM_ARCH_TIMER_H
+
+#include <asm/barrier.h>
+#include <asm/errno.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/types.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#ifdef CONFIG_ARM_ARCH_TIMER
+int arch_timer_arch_init(void);
+
+/*
+ * These register accessors are marked inline so the compiler can
+ * nicely work out which register we want, and chuck away the rest of
+ * the code. At least it does so with a recent GCC (4.6.3).
+ */
+static inline void arch_timer_reg_write(const int access, const int reg, u32 val)
+{
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
+			break;
+		}
+	}
+
+	if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val));
+			break;
+		}
+	}
+
+	isb();
+}
+
+static inline u32 arch_timer_reg_read(const int access, const int reg)
+{
+	u32 val = 0;
+
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
+			break;
+		}
+	}
+
+	if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val));
+			break;
+		case ARCH_TIMER_REG_TVAL:
+			asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val));
+			break;
+		}
+	}
+
+	return val;
+}
+
+static inline u32 arch_timer_get_cntfrq(void)
+{
+	u32 val;
+	asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val));
+	return val;
+}
+
+static inline u64 arch_counter_get_cntvct(void)
+{
+	u64 cval;
+
+	isb();
+	asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval));
+	return cval;
+}
+
+static inline void arch_counter_set_user_access(void)
+{
+	u32 cntkctl;
+
+	asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r" (cntkctl));
+
+	/* disable user access to everything */
+	cntkctl &= ~((3 << 8) | (7 << 0));
+
+	asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
+}
+#endif
+
+#endif
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index c1d351e..3186b38 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -141,7 +141,6 @@ ENDPROC(lookup_processor_type)
  *	r5 = proc_info pointer in physical address space
  *	r9 = cpuid (preserved)
  */
-	__CPUINIT
 ENTRY(__lookup_processor_type)
 	adr	r3, __lookup_processor_type_data
 	ldmia	r3, {r4 - r6}
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 172177d..e67921a 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -337,7 +337,6 @@ __turn_mmu_on_loc:
 	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
-	__CPUINIT
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 18d39ea..7cc47c1 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -976,7 +976,7 @@ reset_regs:
 	}
 }
 
-static int __cpuinit dbg_reset_notify(struct notifier_block *self,
+static int dbg_reset_notify(struct notifier_block *self,
 				      unsigned long action, void *cpu)
 {
 	if (action == CPU_ONLINE)
@@ -985,7 +985,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata dbg_reset_nb = {
+static struct notifier_block dbg_reset_nb = {
 	.notifier_call = dbg_reset_notify,
 };
 
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
new file mode 100644
index 0000000..aebe0e9
--- /dev/null
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -0,0 +1,322 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+#define pr_fmt(fmt) "CPU PMU: " fmt
+
+#include <linux/bitmap.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <asm/cputype.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
+
+/* Set at runtime when we know what CPU type we are. */
+static struct arm_pmu *cpu_pmu;
+
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
+
+/*
+ * Despite the names, these two functions are CPU-specific and are used
+ * by the OProfile/perf code.
+ */
+const char *perf_pmu_name(void)
+{
+	if (!cpu_pmu)
+		return NULL;
+
+	return cpu_pmu->name;
+}
+EXPORT_SYMBOL_GPL(perf_pmu_name);
+
+int perf_num_counters(void)
+{
+	int max_events = 0;
+
+	if (cpu_pmu != NULL)
+		max_events = cpu_pmu->num_events;
+
+	return max_events;
+}
+EXPORT_SYMBOL_GPL(perf_num_counters);
+
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
+
+static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
+{
+	return &__get_cpu_var(cpu_hw_events);
+}
+
+static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu)
+{
+	int i, irq, irqs;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+	for (i = 0; i < irqs; ++i) {
+		if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs))
+			continue;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq >= 0)
+			free_irq(irq, cpu_pmu);
+	}
+}
+
+static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
+{
+	int i, err, irq, irqs;
+	struct platform_device *pmu_device = cpu_pmu->plat_device;
+
+	if (!pmu_device)
+		return -ENODEV;
+
+	irqs = min(pmu_device->num_resources, num_possible_cpus());
+	if (irqs < 1) {
+		pr_err("no irqs for PMUs defined\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < irqs; ++i) {
+		err = 0;
+		irq = platform_get_irq(pmu_device, i);
+		if (irq < 0)
+			continue;
+
+		/*
+		 * If we have a single PMU interrupt that we can't shift,
+		 * assume that we're running on a uniprocessor machine and
+		 * continue. Otherwise, continue without this interrupt.
+		 */
+		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+				    irq, i);
+			continue;
+		}
+
+		err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu",
+				  cpu_pmu);
+		if (err) {
+			pr_err("unable to request IRQ%d for ARM PMU counters\n",
+				irq);
+			return err;
+		}
+
+		cpumask_set_cpu(i, &cpu_pmu->active_irqs);
+	}
+
+	return 0;
+}
+
+static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	int cpu;
+	for_each_possible_cpu(cpu) {
+		struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+		events->events = per_cpu(hw_events, cpu);
+		events->used_mask = per_cpu(used_mask, cpu);
+		raw_spin_lock_init(&events->pmu_lock);
+	}
+
+	cpu_pmu->get_hw_events	= cpu_pmu_get_cpu_events;
+	cpu_pmu->request_irq	= cpu_pmu_request_irq;
+	cpu_pmu->free_irq	= cpu_pmu_free_irq;
+
+	/* Ensure the PMU has sane values out of reset. */
+	if (cpu_pmu->reset)
+		on_each_cpu(cpu_pmu->reset, cpu_pmu, 1);
+}
+
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
+			  void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(cpu_pmu);
+	else
+		return NOTIFY_DONE;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpu_pmu_hotplug_notifier = {
+	.notifier_call = cpu_pmu_notify,
+};
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id cpu_pmu_of_device_ids[] = {
+	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
+	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
+	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
+	{.compatible = "arm,cortex-a7-pmu",	.data = armv7_a7_pmu_init},
+	{.compatible = "arm,cortex-a5-pmu",	.data = armv7_a5_pmu_init},
+	{.compatible = "arm,arm11mpcore-pmu",	.data = armv6mpcore_pmu_init},
+	{.compatible = "arm,arm1176-pmu",	.data = armv6pmu_init},
+	{.compatible = "arm,arm1136-pmu",	.data = armv6pmu_init},
+	{},
+};
+
+static struct platform_device_id cpu_pmu_plat_device_ids[] = {
+	{.name = "arm-pmu"},
+	{},
+};
+
+/*
+ * CPU PMU identification and probing.
+ */
+static int probe_current_pmu(struct arm_pmu *pmu)
+{
+	int cpu = get_cpu();
+	unsigned long implementor = read_cpuid_implementor();
+	unsigned long part_number = read_cpuid_part_number();
+	int ret = -ENODEV;
+
+	pr_info("probing PMU on CPU %d\n", cpu);
+
+	/* ARM Ltd CPUs. */
+	if (implementor == ARM_CPU_IMP_ARM) {
+		switch (part_number) {
+		case ARM_CPU_PART_ARM1136:
+		case ARM_CPU_PART_ARM1156:
+		case ARM_CPU_PART_ARM1176:
+			ret = armv6pmu_init(pmu);
+			break;
+		case ARM_CPU_PART_ARM11MPCORE:
+			ret = armv6mpcore_pmu_init(pmu);
+			break;
+		case ARM_CPU_PART_CORTEX_A8:
+			ret = armv7_a8_pmu_init(pmu);
+			break;
+		case ARM_CPU_PART_CORTEX_A9:
+			ret = armv7_a9_pmu_init(pmu);
+			break;
+		case ARM_CPU_PART_CORTEX_A5:
+			ret = armv7_a5_pmu_init(pmu);
+			break;
+		case ARM_CPU_PART_CORTEX_A15:
+			ret = armv7_a15_pmu_init(pmu);
+			break;
+		case ARM_CPU_PART_CORTEX_A7:
+			ret = armv7_a7_pmu_init(pmu);
+			break;
+		}
+	/* Intel CPUs [xscale]. */
+	} else if (implementor == ARM_CPU_IMP_INTEL) {
+		switch (xscale_cpu_arch_version()) {
+		case ARM_CPU_XSCALE_ARCH_V1:
+			ret = xscale1pmu_init(pmu);
+			break;
+		case ARM_CPU_XSCALE_ARCH_V2:
+			ret = xscale2pmu_init(pmu);
+			break;
+		}
+	}
+
+	put_cpu();
+	return ret;
+}
+
+static int cpu_pmu_device_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id;
+	int (*init_fn)(struct arm_pmu *);
+	struct device_node *node = pdev->dev.of_node;
+	struct arm_pmu *pmu;
+	int ret = -ENODEV;
+
+	if (cpu_pmu) {
+		pr_info("attempt to register multiple PMU devices!");
+		return -ENOSPC;
+	}
+
+	pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL);
+	if (!pmu) {
+		pr_info("failed to allocate PMU device!");
+		return -ENOMEM;
+	}
+
+	if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) {
+		init_fn = of_id->data;
+		ret = init_fn(pmu);
+	} else {
+		ret = probe_current_pmu(pmu);
+	}
+
+	if (ret) {
+		pr_info("failed to probe PMU!");
+		goto out_free;
+	}
+
+	cpu_pmu = pmu;
+	cpu_pmu->plat_device = pdev;
+	cpu_pmu_init(cpu_pmu);
+	ret = armpmu_register(cpu_pmu, PERF_TYPE_RAW);
+
+	if (!ret)
+		return 0;
+
+out_free:
+	pr_info("failed to register PMU devices!");
+	kfree(pmu);
+	return ret;
+}
+
+static struct platform_driver cpu_pmu_driver = {
+	.driver		= {
+		.name	= "arm-pmu",
+		.pm	= &armpmu_dev_pm_ops,
+		.of_match_table = cpu_pmu_of_device_ids,
+	},
+	.probe		= cpu_pmu_device_probe,
+	.id_table	= cpu_pmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+	int err;
+
+	err = register_cpu_notifier(&cpu_pmu_hotplug_notifier);
+	if (err)
+		return err;
+
+	err = platform_driver_register(&cpu_pmu_driver);
+	if (err)
+		unregister_cpu_notifier(&cpu_pmu_hotplug_notifier);
+
+	return err;
+}
+device_initcall(register_pmu_driver);
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
new file mode 100644
index 0000000..70ded3f
--- /dev/null
+++ b/arch/arm/kernel/psci_smp.c
@@ -0,0 +1,83 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/smp.h>
+#include <linux/of.h>
+
+#include <asm/psci.h>
+#include <asm/smp_plat.h>
+
+/*
+ * psci_smp assumes that the following is true about PSCI:
+ *
+ * cpu_suspend   Suspend the execution on a CPU
+ * @state        we don't currently describe affinity levels, so just pass 0.
+ * @entry_point  the first instruction to be executed on return
+ * returns 0  success, < 0 on failure
+ *
+ * cpu_off       Power down a CPU
+ * @state        we don't currently describe affinity levels, so just pass 0.
+ * no return on successful call
+ *
+ * cpu_on        Power up a CPU
+ * @cpuid        cpuid of target CPU, as from MPIDR
+ * @entry_point  the first instruction to be executed on return
+ * returns 0  success, < 0 on failure
+ *
+ * migrate       Migrate the context to a different CPU
+ * @cpuid        cpuid of target CPU, as from MPIDR
+ * returns 0  success, < 0 on failure
+ *
+ */
+
+extern void secondary_startup(void);
+
+static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	if (psci_ops.cpu_on)
+		return psci_ops.cpu_on(cpu_logical_map(cpu),
+				       __pa(secondary_startup));
+	return -ENODEV;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void __ref psci_cpu_die(unsigned int cpu)
+{
+       const struct psci_power_state ps = {
+               .type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+       };
+
+       if (psci_ops.cpu_off)
+               psci_ops.cpu_off(ps);
+
+       /* We should never return */
+       panic("psci: cpu %d failed to shutdown\n", cpu);
+}
+#endif
+
+bool __init psci_smp_available(void)
+{
+	/* is cpu_on available at least? */
+	return (psci_ops.cpu_on != NULL);
+}
+
+struct smp_operations __initdata psci_smp_ops = {
+	.smp_boot_secondary	= psci_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= psci_cpu_die,
+#endif
+};
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 9940f35..6506eb1 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -50,6 +50,12 @@
  */
 struct secondary_data secondary_data;
 
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int pen_release = -1;
+
 enum ipi_msg_type {
 	IPI_TIMER = 2,
 	IPI_RESCHEDULE,
@@ -236,7 +242,7 @@ void __ref cpu_die(void)
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
-static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
+static void smp_store_cpu_info(unsigned int cpuid)
 {
 	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
 
@@ -251,7 +257,7 @@ static void percpu_timer_setup(void);
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
-asmlinkage void __cpuinit secondary_start_kernel(void)
+asmlinkage void secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu;
@@ -447,7 +453,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
+static void broadcast_timer_setup(struct clock_event_device *evt)
 {
 	evt->name	= "dummy_timer";
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
@@ -473,7 +479,7 @@ int local_timer_register(struct local_timer_ops *ops)
 }
 #endif
 
-static void __cpuinit percpu_timer_setup(void)
+static void percpu_timer_setup(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 146d0a0..61cc177 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -145,7 +145,7 @@ core_initcall(twd_cpufreq_init);
 
 #endif
 
-static void __cpuinit twd_calibrate_rate(void)
+static void twd_calibrate_rate(void)
 {
 	unsigned long count;
 	u64 waitjiffies;
@@ -228,7 +228,7 @@ static struct clk *twd_get_clock(void)
 /*
  * Setup the local clock events for a CPU.
  */
-static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
+static int twd_timer_setup(struct clock_event_device *clk)
 {
 	struct clock_event_device **this_cpu_clk;
 
@@ -260,7 +260,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	return 0;
 }
 
-static struct local_timer_ops twd_lt_ops __cpuinitdata = {
+static struct local_timer_ops twd_lt_ops = {
 	.setup	= twd_timer_setup,
 	.stop	= twd_timer_stop,
 };
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
new file mode 100644
index 0000000..14378e3
--- /dev/null
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -0,0 +1,43 @@
+/*
+ * Keystone SOC SMP platform code
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *	Cyril Chemparathy <cyril@ti.com>
+ *	Santosh Shilimkar <santosh.shillimkar@ti.com>
+ *
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_plat.h>
+#include <asm/prom.h>
+
+#include "keystone.h"
+
+static int keystone_smp_boot_secondary(unsigned int cpu,
+						struct task_struct *idle)
+{
+	unsigned long start = virt_to_phys(&secondary_startup);
+	int error;
+
+	pr_debug("keystone-smp: booting cpu %d, vector %08lx\n",
+		 cpu, start);
+
+	error = keystone_cpu_smc(KEYSTONE_MON_CPU_UP_IDX, cpu, start);
+	if (error)
+		pr_err("CPU %d bringup failed with %d\n", cpu, error);
+
+	return error;
+}
+
+struct smp_operations keystone_smp_ops __initdata = {
+	.smp_init_cpus		= arm_dt_init_cpu_maps,
+	.smp_boot_secondary	= keystone_smp_boot_secondary,
+};
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
new file mode 100644
index 0000000..4c24303
--- /dev/null
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -0,0 +1,156 @@
+/*
+ * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SOCs have a coherency fabric which is
+ * responsible for ensuring hardware coherency between all CPUs and between
+ * CPUs and I/O masters. This file initializes the coherency fabric and
+ * supplies basic routines for configuring and controlling hardware coherency
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <asm/smp_plat.h>
+#include <asm/cacheflush.h>
+#include "armada-370-xp.h"
+
+unsigned long coherency_phys_base;
+static void __iomem *coherency_base;
+static void __iomem *coherency_cpu_base;
+
+/* Coherency fabric registers */
+#define COHERENCY_FABRIC_CFG_OFFSET		   0x4
+
+#define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
+
+static struct of_device_id of_coherency_table[] = {
+	{.compatible = "marvell,coherency-fabric"},
+	{ /* end of list */ },
+};
+
+/* Function defined in coherency_ll.S */
+int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id);
+
+int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id)
+{
+	if (!coherency_base) {
+		pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id);
+		pr_warn("Coherency fabric is not initialized\n");
+		return 1;
+	}
+
+	return ll_set_cpu_coherent(coherency_base, hw_cpu_id);
+}
+
+static inline void mvebu_hwcc_sync_io_barrier(void)
+{
+	writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
+	while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
+}
+
+static dma_addr_t mvebu_hwcc_dma_map_page(struct device *dev, struct page *page,
+				  unsigned long offset, size_t size,
+				  enum dma_data_direction dir,
+				  struct dma_attrs *attrs)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
+}
+
+
+static void mvebu_hwcc_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
+			      size_t size, enum dma_data_direction dir,
+			      struct dma_attrs *attrs)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+}
+
+static void mvebu_hwcc_dma_sync(struct device *dev, dma_addr_t dma_handle,
+			size_t size, enum dma_data_direction dir)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+}
+
+static struct dma_map_ops mvebu_hwcc_dma_ops = {
+	.alloc			= arm_dma_alloc,
+	.free			= arm_dma_free,
+	.mmap			= arm_dma_mmap,
+	.map_page		= mvebu_hwcc_dma_map_page,
+	.unmap_page		= mvebu_hwcc_dma_unmap_page,
+	.get_sgtable		= arm_dma_get_sgtable,
+	.map_sg			= arm_dma_map_sg,
+	.unmap_sg		= arm_dma_unmap_sg,
+	.sync_single_for_cpu	= mvebu_hwcc_dma_sync,
+	.sync_single_for_device	= mvebu_hwcc_dma_sync,
+	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
+	.set_dma_mask		= arm_dma_set_mask,
+};
+
+static int mvebu_hwcc_platform_notifier(struct notifier_block *nb,
+				       unsigned long event, void *__dev)
+{
+	struct device *dev = __dev;
+
+	if (event != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+	set_dma_ops(dev, &mvebu_hwcc_dma_ops);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mvebu_hwcc_platform_nb = {
+	.notifier_call = mvebu_hwcc_platform_notifier,
+};
+
+int __init coherency_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
+		struct resource res;
+		pr_info("Initializing Coherency fabric\n");
+		of_address_to_resource(np, 0, &res);
+		coherency_phys_base = res.start;
+		/*
+		 * Ensure secondary CPUs will see the updated value,
+		 * which they read before they join the coherency
+		 * fabric, and therefore before they are coherent with
+		 * the boot CPU cache.
+		 */
+		sync_cache_w(&coherency_phys_base);
+		coherency_base = of_iomap(np, 0);
+		coherency_cpu_base = of_iomap(np, 1);
+		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+	}
+
+	return 0;
+}
+
+static int __init coherency_late_init(void)
+{
+	if (of_find_matching_node(NULL, of_coherency_table))
+		bus_register_notifier(&platform_bus_type,
+				      &mvebu_hwcc_platform_nb);
+	return 0;
+}
+
+postcore_initcall(coherency_late_init);
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
new file mode 100644
index 0000000..8a1b0c9
--- /dev/null
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -0,0 +1,47 @@
+/*
+ * SMP support: Entry point for secondary CPUs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file implements the assembly entry point for secondary CPUs in
+ * an SMP kernel. The only thing we need to do is to add the CPU to
+ * the coherency fabric by writing to 2 registers. Currently the base
+ * register addresses are hard coded due to the early initialisation
+ * problems.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/*
+ * Armada XP specific entry point for secondary CPUs.
+ * We add the CPU to the coherency fabric and then jump to secondary
+ * startup
+ */
+ENTRY(armada_xp_secondary_startup)
+	/* Get coherency fabric base physical address */
+	adr	r0, 1f
+	ldr	r1, [r0]
+	ldr	r0, [r0, r1]
+
+	/* Read CPU id */
+	mrc     p15, 0, r1, c0, c0, 5
+	and     r1, r1, #0xF
+
+	/* Add CPU to coherency fabric */
+	bl	ll_set_cpu_coherent
+	b	secondary_startup
+
+ENDPROC(armada_xp_secondary_startup)
+
+	.align 2
+1:
+	.long	coherency_phys_base - .
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
new file mode 100644
index 0000000..ce81d30
--- /dev/null
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -0,0 +1,131 @@
+/*
+ * Symmetric Multi Processing (SMP) support for Armada XP
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada XP SoC has 4 ARMv7 PJ4B CPUs running in full HW coherency
+ * This file implements the routines for preparing the SMP infrastructure
+ * and waking up the secondary CPUs
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/mbus.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "armada-370-xp.h"
+#include "pmsu.h"
+#include "coherency.h"
+
+void __init set_secondary_cpus_clock(void)
+{
+	int thiscpu;
+	unsigned long rate;
+	struct clk *cpu_clk = NULL;
+	struct device_node *np = NULL;
+
+	thiscpu = smp_processor_id();
+	for_each_node_by_type(np, "cpu") {
+		int err;
+		int cpu;
+
+		err = of_property_read_u32(np, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		if (cpu == thiscpu) {
+			cpu_clk = of_clk_get(np, 0);
+			break;
+		}
+	}
+	if (WARN_ON(IS_ERR(cpu_clk)))
+		return;
+	clk_prepare_enable(cpu_clk);
+	rate = clk_get_rate(cpu_clk);
+
+	/* set all the other CPU clk to the same rate than the boot CPU */
+	for_each_node_by_type(np, "cpu") {
+		int err;
+		int cpu;
+
+		err = of_property_read_u32(np, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		if (cpu != thiscpu) {
+			cpu_clk = of_clk_get(np, 0);
+			clk_set_rate(cpu_clk, rate);
+		}
+	}
+}
+
+static void armada_xp_secondary_init(unsigned int cpu)
+{
+	armada_xp_mpic_smp_cpu_init();
+}
+
+static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	pr_info("Booting CPU %d\n", cpu);
+
+	armada_xp_boot_cpu(cpu, armada_xp_secondary_startup);
+
+	return 0;
+}
+
+static void __init armada_xp_smp_init_cpus(void)
+{
+	struct device_node *np;
+	unsigned int i, ncores;
+
+	np = of_find_node_by_name(NULL, "cpus");
+	if (!np)
+		panic("No 'cpus' node found\n");
+
+	ncores = of_get_child_count(np);
+	if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS)
+		panic("Invalid number of CPUs in DT\n");
+
+	/* Limit possible CPUs to defconfig */
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %d CPUs physically present. Only %d configured.",
+			ncores, nr_cpu_ids);
+		pr_warn("Clipping CPU count to %d\n", nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(armada_mpic_send_doorbell);
+}
+
+void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
+{
+	set_secondary_cpus_clock();
+	flush_cache_all();
+	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+	mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
+}
+
+struct smp_operations armada_xp_smp_ops __initdata = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_secondary_init	= armada_xp_secondary_init,
+	.smp_boot_secondary	= armada_xp_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S
new file mode 100644
index 0000000..d86fe33
--- /dev/null
+++ b/arch/arm/mach-prima2/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ * Entry of the second core for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/*
+ * SIRFSOC specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(sirfsoc_secondary_startup)
+	bl v7_invalidate_l1
+        mrc     p15, 0, r0, c0, c0, 5
+        and     r0, r0, #15
+        adr     r4, 1f
+        ldmia   r4, {r5, r6}
+        sub     r4, r4, r5
+        add     r6, r6, r4
+pen:    ldr     r7, [r6]
+        cmp     r7, r0
+        bne     pen
+
+        /*
+         * we've been released from the holding pen: secondary_stack
+         * should now contain the SVC stack for this core
+         */
+        b       secondary_startup
+ENDPROC(sirfsoc_secondary_startup)
+
+        .align
+1:      .long   .
+        .long   pen_release
diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
new file mode 100644
index 0000000..3dbcb1a
--- /dev/null
+++ b/arch/arm/mach-prima2/platsmp.c
@@ -0,0 +1,148 @@
+/*
+ * plat smp support for CSR Marco dual-core SMP SoCs
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+
+#include "common.h"
+
+static void __iomem *scu_base;
+static void __iomem *rsc_base;
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static struct map_desc scu_io_desc __initdata = {
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+};
+
+void __init sirfsoc_map_scu(void)
+{
+	unsigned long base;
+
+	/* Get SCU base */
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+	scu_io_desc.virtual = SIRFSOC_VA(base);
+	scu_io_desc.pfn = __phys_to_pfn(base);
+	iotable_init(&scu_io_desc, 1);
+
+	scu_base = (void __iomem *)SIRFSOC_VA(base);
+}
+
+static void sirfsoc_secondary_init(unsigned int cpu)
+{
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static struct of_device_id rsc_ids[]  = {
+	{ .compatible = "sirf,marco-rsc" },
+	{},
+};
+
+static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, rsc_ids);
+	if (!np)
+		return -ENODEV;
+
+	rsc_base = of_iomap(np, 0);
+	if (!rsc_base)
+		return -ENOMEM;
+
+	/*
+	 * write the address of secondary startup into the sram register
+	 * at offset 0x2C, then write the magic number 0x3CAF5D62 to the
+	 * RSC register at offset 0x28, which is what boot rom code is
+	 * waiting for. This would wake up the secondary core from WFE
+	 */
+#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C
+	__raw_writel(virt_to_phys(sirfsoc_secondary_startup),
+		rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET);
+
+#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28
+	__raw_writel(0x3CAF5D62,
+		rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
+
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu_logical_map(cpu);
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+	/*
+	 * Send the secondary CPU SEV, thereby causing the boot monitor to read
+	 * the JUMPADDR and WAKEMAGIC, and branch to the address found there.
+	 */
+	dsb_sev();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus)
+{
+	scu_enable(scu_base);
+}
+
+struct smp_operations sirfsoc_smp_ops __initdata = {
+        .smp_prepare_cpus       = sirfsoc_smp_prepare_cpus,
+        .smp_secondary_init     = sirfsoc_secondary_init,
+        .smp_boot_secondary     = sirfsoc_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die                = sirfsoc_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
new file mode 100644
index 0000000..bfd9200
--- /dev/null
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -0,0 +1,49 @@
+/*
+ * Shared SCU setup for mach-shmobile
+ *
+ * Copyright (C) 2012 Bastian Hecht
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+
+/*
+ * Boot code for secondary CPUs.
+ *
+ * First we turn on L1 cache coherency for our CPU. Then we jump to
+ * shmobile_invalidate_start that invalidates the cache and hands over control
+ * to the common ARM startup code.
+ */
+ENTRY(shmobile_boot_scu)
+					@ r0 = SCU base address
+	mrc     p15, 0, r1, c0, c0, 5	@ read MIPDR
+	and	r1, r1, #3		@ mask out cpu ID
+	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
+	ldr	r2, [r0, #8]		@ SCU Power Status Register
+	mov	r3, #3
+	bic	r2, r2, r3, lsl r1	@ Clear bits of our CPU (Run Mode)
+	str	r2, [r0, #8]		@ write back
+
+	b	shmobile_invalidate_start
+ENDPROC(shmobile_boot_scu)
+
+	.text
+	.globl	shmobile_scu_base
+shmobile_scu_base:
+	.space	4
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
new file mode 100644
index 0000000..22a05a8
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -0,0 +1,69 @@
+/*
+ * SMP support for Emma Mobile EV2
+ *
+ * Copyright (C) 2012  Renesas Solutions Corp.
+ * Copyright (C) 2012  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <mach/common.h>
+#include <mach/emev2.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define EMEV2_SCU_BASE 0x1e000000
+
+static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu)));
+	return 0;
+}
+
+static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
+{
+	scu_enable(shmobile_scu_base);
+
+	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
+	emev2_set_boot_vector(__pa(shmobile_boot_vector));
+	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
+	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
+
+	/* enable cache coherency on booting CPU */
+	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
+}
+
+static void __init emev2_smp_init_cpus(void)
+{
+	unsigned int ncores;
+
+	/* setup EMEV2 specific SCU base */
+	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
+	emev2_clock_init(); /* need ioremapped SMU */
+
+	ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
+
+	shmobile_smp_init_cpus(ncores);
+}
+
+struct smp_operations emev2_smp_ops __initdata = {
+	.smp_init_cpus		= emev2_smp_init_cpus,
+	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
+	.smp_boot_secondary	= emev2_boot_secondary,
+};
diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S
new file mode 100644
index 0000000..95c115d
--- /dev/null
+++ b/arch/arm/mach-socfpga/headsmp.S
@@ -0,0 +1,32 @@
+/*
+ *  Copyright (c) 2003 ARM Limited
+ *  Copyright (c) u-boot contributors
+ *  Copyright (c) 2012 Pavel Machek <pavel@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	.arch	armv7-a
+
+ENTRY(secondary_trampoline)
+	movw	r2, #:lower16:cpu1start_addr
+	movt  r2, #:upper16:cpu1start_addr
+
+	/* The socfpga VT cannot handle a 0xC0000000 page offset when loading
+		the cpu1start_addr, we bit clear it. Tested on HW and VT. */
+	bic	r2, r2, #0x40000000
+
+	ldr	r0, [r2]
+	ldr	r1, [r0]
+	bx	r1
+
+ENTRY(secondary_trampoline_end)
+
+ENTRY(socfpga_secondary_startup)
+       bl      v7_invalidate_l1
+       b       secondary_startup
+ENDPROC(socfpga_secondary_startup)
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
new file mode 100644
index 0000000..5356a72
--- /dev/null
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Copyright 2012 Pavel Machek <pavel@denx.de>
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2012 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+
+#include "core.h"
+
+static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+
+	if (cpu1start_addr) {
+		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+
+		__raw_writel(virt_to_phys(socfpga_secondary_startup),
+			(sys_manager_base_addr + (cpu1start_addr & 0x000000ff)));
+
+		flush_cache_all();
+		smp_wmb();
+		outer_clean_range(0, trampoline_size);
+
+		/* This will release CPU #1 out of reset.*/
+		__raw_writel(0, rst_manager_base_addr + 0x10);
+	}
+
+	return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init socfpga_smp_init_cpus(void)
+{
+	unsigned int i, ncores;
+
+	ncores = scu_get_core_count(socfpga_scu_base_addr);
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	/* sanity check */
+	if (ncores > num_possible_cpus()) {
+		pr_warn("socfpga: no. of cores (%d) greater than configured"
+			"maximum of %d - clipping\n", ncores, num_possible_cpus());
+		ncores = num_possible_cpus();
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
+{
+	scu_enable(socfpga_scu_base_addr);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+static void socfpga_cpu_die(unsigned int cpu)
+{
+	cpu_do_idle();
+
+	/* We should have never returned from idle */
+	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+struct smp_operations socfpga_smp_ops __initdata = {
+	.smp_init_cpus		= socfpga_smp_init_cpus,
+	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
+	.smp_boot_secondary	= socfpga_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= socfpga_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
new file mode 100644
index 0000000..a99d90a
--- /dev/null
+++ b/arch/arm/mach-spear/generic.h
@@ -0,0 +1,56 @@
+/*
+ * spear machine family generic header file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <linux/amba/pl08x.h>
+#include <linux/init.h>
+#include <linux/reboot.h>
+
+#include <asm/mach/time.h>
+
+extern void spear13xx_timer_init(void);
+extern void spear3xx_timer_init(void);
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
+
+void __init spear_setup_of_timer(void);
+void __init spear3xx_clk_init(void __iomem *misc_base,
+			      void __iomem *soc_config_base);
+void __init spear3xx_map_io(void);
+void __init spear3xx_dt_init_irq(void);
+void __init spear6xx_clk_init(void __iomem *misc_base);
+void __init spear13xx_map_io(void);
+void __init spear13xx_l2x0_init(void);
+
+void spear_restart(enum reboot_mode, const char *);
+
+void spear13xx_secondary_startup(void);
+void spear13xx_cpu_die(unsigned int cpu);
+
+extern struct smp_operations spear13xx_smp_ops;
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);
+#else
+static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void __iomem *misc_base);
+#else
+static inline void spear1340_clk_init(void __iomem *misc_base) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
new file mode 100644
index 0000000..5c4a198
--- /dev/null
+++ b/arch/arm/mach-spear/platsmp.c
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/mach-spear13xx/platsmp.c
+ *
+ * based upon linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2012 ST Microelectronics Ltd.
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <mach/spear.h>
+#include "generic.h"
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
+
+static void spear13xx_secondary_init(unsigned int cpu)
+{
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+	outer_flush_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init spear13xx_smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+			ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+	scu_enable(scu_base);
+
+	/*
+	 * Write the address of secondary startup into the system-wide location
+	 * (presently it is in SRAM). The BootMonitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this address.
+	 */
+	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
+}
+
+struct smp_operations spear13xx_smp_ops __initdata = {
+       .smp_init_cpus		= spear13xx_smp_init_cpus,
+       .smp_prepare_cpus	= spear13xx_smp_prepare_cpus,
+       .smp_secondary_init	= spear13xx_secondary_init,
+       .smp_boot_secondary	= spear13xx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+       .cpu_die			= spear13xx_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c
new file mode 100644
index 0000000..dce50d9
--- /dev/null
+++ b/arch/arm/mach-sti/platsmp.c
@@ -0,0 +1,117 @@
+/*
+ *  arch/arm/mach-sti/platsmp.c
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *		http://www.st.com
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#include "smp.h"
+
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void sti_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int sti_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	write_pen_release(cpu_logical_map(cpu));
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * it to jump to the secondary entrypoint.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+void __init sti_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *scu_base = NULL;
+	struct device_node *np = of_find_compatible_node(
+					NULL, NULL, "arm,cortex-a9-scu");
+	if (np) {
+		scu_base = of_iomap(np, 0);
+		scu_enable(scu_base);
+		of_node_put(np);
+	}
+}
+
+struct smp_operations __initdata sti_smp_ops = {
+	.smp_prepare_cpus	= sti_smp_prepare_cpus,
+	.smp_secondary_init	= sti_secondary_init,
+	.smp_boot_secondary	= sti_boot_secondary,
+};
diff --git a/arch/arm/mach-stm/platsmp.c b/arch/arm/mach-stm/platsmp.c
index 71a3174..c7f2bf5 100644
--- a/arch/arm/mach-stm/platsmp.c
+++ b/arch/arm/mach-stm/platsmp.c
@@ -36,12 +36,12 @@ extern void stm_secondary_startup(void);
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
-volatile int __cpuinitdata pen_release = -1;
+extern volatile int pen_release;
 
 #ifdef CONFIG_HIBERNATION_ON_MEMORY
-void __cpuinit write_pen_release(int val)
+void write_pen_release(int val)
 #else
-static void __cpuinit write_pen_release(int val)
+static void write_pen_release(int val)
 #endif
 {
 	pen_release = val;
@@ -57,7 +57,7 @@ static inline unsigned int get_core_count(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __cpuinit platform_secondary_init(unsigned int cpu)
+void platform_secondary_init(unsigned int cpu)
 {
 printk("%s(%d)\n", __FUNCTION__, cpu);
 	trace_hardirqs_off();
@@ -82,7 +82,7 @@ printk("%s(%d)\n", __FUNCTION__, cpu);
 	spin_unlock(&boot_lock);
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
new file mode 100644
index 0000000..261fec1
--- /dev/null
+++ b/arch/arm/mach-tegra/pm.c
@@ -0,0 +1,248 @@
+/*
+ * CPU complex suspend & resume functions for Tegra SoCs
+ *
+ * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/cpu_pm.h>
+#include <linux/suspend.h>
+#include <linux/err.h>
+#include <linux/clk/tegra.h>
+
+#include <asm/smp_plat.h>
+#include <asm/cacheflush.h>
+#include <asm/suspend.h>
+#include <asm/idmap.h>
+#include <asm/proc-fns.h>
+#include <asm/tlbflush.h>
+
+#include "iomap.h"
+#include "reset.h"
+#include "flowctrl.h"
+#include "fuse.h"
+#include "pmc.h"
+#include "sleep.h"
+
+#ifdef CONFIG_PM_SLEEP
+static DEFINE_SPINLOCK(tegra_lp2_lock);
+void (*tegra_tear_down_cpu)(void);
+
+static void tegra_tear_down_cpu_init(void)
+{
+	switch (tegra_chip_id) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra_tear_down_cpu = tegra20_tear_down_cpu;
+		break;
+	case TEGRA30:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC))
+			tegra_tear_down_cpu = tegra30_tear_down_cpu;
+		break;
+	}
+}
+
+/*
+ * restore_cpu_complex
+ *
+ * restores cpu clock setting, clears flow controller
+ *
+ * Always called on CPU 0.
+ */
+static void restore_cpu_complex(void)
+{
+	int cpu = smp_processor_id();
+
+	BUG_ON(cpu != 0);
+
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
+
+	/* Restore the CPU clock settings */
+	tegra_cpu_clock_resume();
+
+	flowctrl_cpu_suspend_exit(cpu);
+}
+
+/*
+ * suspend_cpu_complex
+ *
+ * saves pll state for use by restart_plls, prepares flow controller for
+ * transition to suspend state
+ *
+ * Must always be called on cpu 0.
+ */
+static void suspend_cpu_complex(void)
+{
+	int cpu = smp_processor_id();
+
+	BUG_ON(cpu != 0);
+
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
+
+	/* Save the CPU clock settings */
+	tegra_cpu_clock_suspend();
+
+	flowctrl_cpu_suspend_enter(cpu);
+}
+
+void tegra_clear_cpu_in_lp2(void)
+{
+	int phy_cpu_id = cpu_logical_map(smp_processor_id());
+	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
+
+	spin_lock(&tegra_lp2_lock);
+
+	BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id)));
+	*cpu_in_lp2 &= ~BIT(phy_cpu_id);
+
+	spin_unlock(&tegra_lp2_lock);
+}
+
+bool tegra_set_cpu_in_lp2(void)
+{
+	int phy_cpu_id = cpu_logical_map(smp_processor_id());
+	bool last_cpu = false;
+	cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
+	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
+
+	spin_lock(&tegra_lp2_lock);
+
+	BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
+	*cpu_in_lp2 |= BIT(phy_cpu_id);
+
+	if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
+		last_cpu = true;
+	else if (tegra_chip_id == TEGRA20 && phy_cpu_id == 1)
+		tegra20_cpu_set_resettable_soon();
+
+	spin_unlock(&tegra_lp2_lock);
+	return last_cpu;
+}
+
+int tegra_cpu_do_idle(void)
+{
+	return cpu_do_idle();
+}
+
+static int tegra_sleep_cpu(unsigned long v2p)
+{
+	setup_mm_for_reboot();
+	tegra_sleep_cpu_finish(v2p);
+
+	/* should never here */
+	BUG();
+
+	return 0;
+}
+
+void tegra_idle_lp2_last(void)
+{
+	tegra_pmc_pm_set(TEGRA_SUSPEND_LP2);
+
+	cpu_cluster_pm_enter();
+	suspend_cpu_complex();
+
+	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+
+	restore_cpu_complex();
+	cpu_cluster_pm_exit();
+}
+
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+				enum tegra_suspend_mode mode)
+{
+	/* Tegra114 didn't support any suspending mode yet. */
+	if (tegra_chip_id == TEGRA114)
+		return TEGRA_SUSPEND_NONE;
+
+	/*
+	 * The Tegra devices only support suspending to LP2 currently.
+	 */
+	if (mode > TEGRA_SUSPEND_LP2)
+		return TEGRA_SUSPEND_LP2;
+
+	return mode;
+}
+
+static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
+	[TEGRA_SUSPEND_NONE] = "none",
+	[TEGRA_SUSPEND_LP2] = "LP2",
+	[TEGRA_SUSPEND_LP1] = "LP1",
+	[TEGRA_SUSPEND_LP0] = "LP0",
+};
+
+static int tegra_suspend_enter(suspend_state_t state)
+{
+	enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+	if (WARN_ON(mode < TEGRA_SUSPEND_NONE ||
+		    mode >= TEGRA_MAX_SUSPEND_MODE))
+		return -EINVAL;
+
+	pr_info("Entering suspend state %s\n", lp_state[mode]);
+
+	tegra_pmc_pm_set(mode);
+
+	local_fiq_disable();
+
+	suspend_cpu_complex();
+	switch (mode) {
+	case TEGRA_SUSPEND_LP2:
+		tegra_set_cpu_in_lp2();
+		break;
+	default:
+		break;
+	}
+
+	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+
+	switch (mode) {
+	case TEGRA_SUSPEND_LP2:
+		tegra_clear_cpu_in_lp2();
+		break;
+	default:
+		break;
+	}
+	restore_cpu_complex();
+
+	local_fiq_enable();
+
+	return 0;
+}
+
+static const struct platform_suspend_ops tegra_suspend_ops = {
+	.valid		= suspend_valid_only_mem,
+	.enter		= tegra_suspend_enter,
+};
+
+void __init tegra_init_suspend(void)
+{
+	if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE)
+		return;
+
+	tegra_tear_down_cpu_init();
+	tegra_pmc_suspend_init();
+
+	suspend_set_ops(&tegra_suspend_ops);
+}
+#endif
diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S
new file mode 100644
index 0000000..d4cd5f3
--- /dev/null
+++ b/arch/arm/mach-zynq/headsmp.S
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright (c) 2012-2013 Xilinx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ENTRY(zynq_secondary_trampoline)
+	ldr	r0, [pc]
+	bx	r0
+.globl zynq_secondary_trampoline_jump
+zynq_secondary_trampoline_jump:
+	/* Space for jumping address */
+	.word	/* cpu 1 */
+.globl zynq_secondary_trampoline_end
+zynq_secondary_trampoline_end:
+
+ENDPROC(zynq_secondary_trampoline)
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
new file mode 100644
index 0000000..689fbbc
--- /dev/null
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -0,0 +1,136 @@
+/*
+ * This file contains Xilinx specific SMP code, used to start up
+ * the second processor.
+ *
+ * Copyright (C) 2011-2013 Xilinx
+ *
+ * based on linux/arch/arm/mach-realview/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <linux/irqchip/arm-gic.h>
+#include "common.h"
+
+/*
+ * Store number of cores in the system
+ * Because of scu_get_core_count() must be in __init section and can't
+ * be called from zynq_cpun_start() because it is not in __init section.
+ */
+static int ncores;
+
+int zynq_cpun_start(u32 address, int cpu)
+{
+	u32 trampoline_code_size = &zynq_secondary_trampoline_end -
+						&zynq_secondary_trampoline;
+
+	if (cpu > ncores) {
+		pr_warn("CPU No. is not available in the system\n");
+		return -1;
+	}
+
+	/* MS: Expectation that SLCR are directly map and accessible */
+	/* Not possible to jump to non aligned address */
+	if (!(address & 3) && (!address || (address >= trampoline_code_size))) {
+		/* Store pointer to ioremap area which points to address 0x0 */
+		static u8 __iomem *zero;
+		u32 trampoline_size = &zynq_secondary_trampoline_jump -
+						&zynq_secondary_trampoline;
+
+		zynq_slcr_cpu_stop(cpu);
+		if (address) {
+			if (__pa(PAGE_OFFSET)) {
+				zero = ioremap(0, trampoline_code_size);
+				if (!zero) {
+					pr_warn("BOOTUP jump vectors not accessible\n");
+					return -1;
+				}
+			} else {
+				zero = (__force u8 __iomem *)PAGE_OFFSET;
+			}
+
+			/*
+			* This is elegant way how to jump to any address
+			* 0x0: Load address at 0x8 to r0
+			* 0x4: Jump by mov instruction
+			* 0x8: Jumping address
+			*/
+			memcpy((__force void *)zero, &zynq_secondary_trampoline,
+							trampoline_size);
+			writel(address, zero + trampoline_size);
+
+			flush_cache_all();
+			outer_flush_range(0, trampoline_code_size);
+			smp_wmb();
+
+			if (__pa(PAGE_OFFSET))
+				iounmap(zero);
+		}
+		zynq_slcr_cpu_start(cpu);
+
+		return 0;
+	}
+
+	pr_warn("Can't start CPU%d: Wrong starting address %x\n", cpu, address);
+
+	return -1;
+}
+EXPORT_SYMBOL(zynq_cpun_start);
+
+static int zynq_boot_secondary(unsigned int cpu,
+						struct task_struct *idle)
+{
+	return zynq_cpun_start(virt_to_phys(secondary_startup), cpu);
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init zynq_smp_init_cpus(void)
+{
+	int i;
+
+	ncores = scu_get_core_count(zynq_scu_base);
+
+	for (i = 0; i < ncores && i < CONFIG_NR_CPUS; i++)
+		set_cpu_possible(i, true);
+}
+
+static void __init zynq_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	scu_enable(zynq_scu_base);
+}
+
+struct smp_operations zynq_smp_ops __initdata = {
+	.smp_init_cpus		= zynq_smp_init_cpus,
+	.smp_prepare_cpus	= zynq_smp_prepare_cpus,
+	.smp_boot_secondary	= zynq_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= zynq_platform_cpu_die,
+#endif
+};
diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S
index 3a4b3e7..099c715 100644
--- a/arch/arm/mm/proc-v7-2level.S
+++ b/arch/arm/mm/proc-v7-2level.S
@@ -155,8 +155,6 @@ ENDPROC(cpu_v7_set_pte_ext)
 	mcr	p15, 0, \ttbr1, c2, c0, 1	@ load TTB1
 	.endm
 
-	__CPUINIT
-
 	/*   AT
 	 *  TFR   EV X F   I D LR    S
 	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
@@ -166,6 +164,4 @@ ENDPROC(cpu_v7_set_pte_ext)
 	.align	2
 	.type	v7_crval, #object
 v7_crval:
-	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
-
-	.previous
+	crval	clear=0x2120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index 8de0f1d..8bcf31b 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -133,8 +133,6 @@ ENDPROC(cpu_v7_set_pte_ext)
 	mcrr	p15, 1, \ttbr1, \zero, c2	@ load TTBR1
 	.endm
 
-	__CPUINIT
-
 	/*
 	 *   AT
 	 *  TFR   EV X F   IHD LR    S
@@ -146,5 +144,3 @@ ENDPROC(cpu_v7_set_pte_ext)
 	.type	v7_crval, #object
 v7_crval:
 	crval	clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
-
-	.previous
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c2e2b66..c7aecf3 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -140,7 +140,28 @@ ENTRY(cpu_v7_do_resume)
 ENDPROC(cpu_v7_do_resume)
 #endif
 
-	__CPUINIT
+#ifdef CONFIG_CPU_PJ4B
+	globl_equ	cpu_pj4b_switch_mm,     cpu_v7_switch_mm
+	globl_equ	cpu_pj4b_set_pte_ext,	cpu_v7_set_pte_ext
+	globl_equ	cpu_pj4b_proc_init,	cpu_v7_proc_init
+	globl_equ	cpu_pj4b_proc_fin, 	cpu_v7_proc_fin
+	globl_equ	cpu_pj4b_reset,	   	cpu_v7_reset
+#ifdef CONFIG_PJ4B_ERRATA_4742
+ENTRY(cpu_pj4b_do_idle)
+	dsb					@ WFI may enter a low-power mode
+	wfi
+	dsb					@barrier
+	mov	pc, lr
+ENDPROC(cpu_pj4b_do_idle)
+#else
+	globl_equ	cpu_pj4b_do_idle,  	cpu_v7_do_idle
+#endif
+	globl_equ	cpu_pj4b_dcache_clean_area,	cpu_v7_dcache_clean_area
+	globl_equ	cpu_pj4b_do_suspend,	cpu_v7_do_suspend
+	globl_equ	cpu_pj4b_do_resume,	cpu_v7_do_resume
+	globl_equ	cpu_pj4b_suspend_size,	cpu_v7_suspend_size
+
+#endif
 
 /*
  *	__v7_setup
