| Message ID | 1384865989-12875-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Nov 19, 2013 at 01:59:49PM +0100, Laurent Pinchart wrote: > The device is configured to generate an active-low interrupt signal that > needs to be acknowledged by the host. Configure the IRQ to trigger on > low level. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > Changes since v1: > > - Fixed typo (IRQ_TYPE_LOW_LEVEL -> IRQ_TYPE_LEVEL_LOW) Thanks, I will queue this up. Assuming all goes will I plan to push this and other updates today or tomorrow. > > diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts > index aef425f..7b80f19 100644 > --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts > +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts > @@ -95,7 +95,7 @@ > compatible = "sitronix,st1232"; > reg = <0x55>; > interrupt-parent = <&irqpin1>; > - interrupts = <2 IRQ_TYPE_NONE>; /* IRQ10: hwirq 2 on irqpin1 */ > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > pinctrl-0 = <&st1232_pins>; > pinctrl-names = "default"; > gpios = <&pfc 166 GPIO_ACTIVE_LOW>; > -- > 1.8.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-sh" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index aef425f..7b80f19 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -95,7 +95,7 @@ compatible = "sitronix,st1232"; reg = <0x55>; interrupt-parent = <&irqpin1>; - interrupts = <2 IRQ_TYPE_NONE>; /* IRQ10: hwirq 2 on irqpin1 */ + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&st1232_pins>; pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
The device is configured to generate an active-low interrupt signal that needs to be acknowledged by the host. Configure the IRQ to trigger on low level. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Changes since v1: - Fixed typo (IRQ_TYPE_LOW_LEVEL -> IRQ_TYPE_LEVEL_LOW)