@@ -95,6 +95,7 @@ config ARCH_OMAP2PLUS
select SPARSE_IRQ
select TI_PRIV_EDMA
select USE_OF
+ select REGMAP_MMIO
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
@@ -291,6 +291,8 @@ extern const struct clksel_rate div_1_3_rates[];
extern const struct clksel_rate div_1_4_rates[];
extern const struct clksel_rate div31_1to31_rates[];
+extern struct regmap *clk_regmaps[];
+
extern int am33xx_clk_init(void);
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
@@ -18,6 +18,7 @@
# ifndef __ASSEMBLER__
extern void __iomem *prm_base;
extern void omap2_set_globals_prm(void __iomem *prm);
+int of_prcm_init(void);
# endif
@@ -23,6 +23,12 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/ti.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
#include "soc.h"
#include "prm2xxx_3xxx.h"
@@ -30,6 +36,7 @@
#include "prm3xxx.h"
#include "prm44xx.h"
#include "common.h"
+#include "clock.h"
/*
* OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
@@ -464,3 +471,124 @@ int prm_unregister(struct prm_ll_data *pld)
return 0;
}
+
+static struct of_device_id omap_prcm_dt_match_table[] = {
+ { .compatible = "ti,clock-master" },
+ { }
+};
+
+static struct regmap_config ti_clk_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .cache_type = REGCACHE_NONE,
+};
+
+static LIST_HEAD(prcm_early_devs);
+
+struct prcm_early_dev {
+ struct device_node *node;
+ struct platform_device *dev;
+ struct list_head link;
+};
+
+static struct clk_hw_omap regmap_dummy_ck = {
+ .flags = REGMAP_ADDRESSING,
+};
+
+static u32 prm_clk_readl(u32 *reg)
+{
+ return omap2_clk_readl(®map_dummy_ck, reg);
+}
+
+static void prm_clk_writel(u32 val, u32 *reg)
+{
+ omap2_clk_writel(val, ®map_dummy_ck, reg);
+}
+
+static struct clk_reg_ops omap_clk_reg_ops = {
+ .clk_readl = prm_clk_readl,
+ .clk_writel = prm_clk_writel,
+};
+
+int __init of_prcm_init(void)
+{
+ struct device_node *np;
+ void __iomem *mem;
+ struct regmap *regmap;
+ struct platform_device *pdev;
+ struct prcm_early_dev *edev;
+ int regmap_index = 0;
+
+ clk_register_reg_ops(&omap_clk_reg_ops);
+
+ for_each_matching_node(np, omap_prcm_dt_match_table) {
+ pdev = platform_device_alloc(np->name, 0);
+ dev_set_name(&pdev->dev, "%s", pdev->name);
+ edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+ edev->dev = pdev;
+ edev->node = np;
+ list_add(&edev->link, &prcm_early_devs);
+ mem = of_iomap(np, 0);
+ ti_clk_regmap_config.name = "0";
+ regmap = regmap_init_mmio(&pdev->dev, mem,
+ &ti_clk_regmap_config);
+ clk_regmaps[regmap_index] = regmap;
+ ti_dt_clk_init_provider(np, regmap_index);
+ regmap_index++;
+ }
+
+ ti_dt_clockdomains_setup();
+
+ return 0;
+}
+
+static int prcm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(omap_prcm_dt_match_table, &pdev->dev);
+ struct prcm_early_dev *edev;
+ int ret;
+
+ if (!of_id)
+ return 0;
+
+ list_for_each_entry(edev, &prcm_early_devs, link) {
+ if (edev->node == pdev->dev.of_node) {
+ platform_device_add(edev->dev);
+ edev->dev->dev.driver = pdev->dev.driver;
+ ret = device_bind_driver(&edev->dev->dev);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int prcm_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver prcm_driver = {
+ .probe = prcm_probe,
+ .remove = prcm_remove,
+ .driver = {
+ .name = "prcm-driver",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(omap_prcm_dt_match_table),
+ },
+};
+
+static __init int prcm_init(void)
+{
+ return platform_driver_register(&prcm_driver);
+}
+
+static __exit void prcm_exit(void)
+{
+ platform_driver_unregister(&prcm_driver);
+}
+omap_postcore_initcall(prcm_init);
+module_exit(prcm_exit);
This patch provides top level functionality for the DT clock initialization. Clock tree is initialized hierarchically starting from IP modules (CM/PRM/PRCM) going down towards individual clock nodes, and finally initializing clockdomains once all the clocks are ready. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/clock.h | 2 + arch/arm/mach-omap2/prm.h | 1 + arch/arm/mach-omap2/prm_common.c | 128 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 132 insertions(+)