Message ID | 1386056231-17258-3-git-send-email-peter.chen@freescale.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, Dec 03, 2013 at 09:38:20AM +0100, Marc Kleine-Budde wrote: > On 12/03/2013 08:36 AM, Peter Chen wrote: > > The mxs-phy has several bugs and features at different > > versions, the driver code can get it through of_device_id.data. > > > > Signed-off-by: Peter Chen <peter.chen@freescale.com> > > --- > > drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------ > > 1 files changed, 49 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > > index 545844b..f6cbc78 100644 > > --- a/drivers/usb/phy/phy-mxs-usb.c > > +++ b/drivers/usb/phy/phy-mxs-usb.c > > @@ -1,5 +1,5 @@ > > /* > > - * Copyright 2012 Freescale Semiconductor, Inc. > > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > > * Copyright (C) 2012 Marek Vasut <marex@denx.de> > > * on behalf of DENX Software Engineering GmbH > > * > > @@ -20,6 +20,7 @@ > > #include <linux/delay.h> > > #include <linux/err.h> > > #include <linux/io.h> > > +#include <linux/of_device.h> > > > > #define DRIVER_NAME "mxs_phy" > > > > @@ -34,13 +35,55 @@ > > #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) > > #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) > > > > +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > > + > > +/* Do disconnection between PHY and controller without vbus */ > > +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) > > + > > +/* > > + * The PHY will be in messy if there is an wakeup after putting > ^^ > a > Do you mean "messy state"? Yes, will change the typo.
On 12/03/2013 08:36 AM, Peter Chen wrote: > The mxs-phy has several bugs and features at different > versions, the driver code can get it through of_device_id.data. > > Signed-off-by: Peter Chen <peter.chen@freescale.com> > --- > drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------ > 1 files changed, 49 insertions(+), 9 deletions(-) > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > index 545844b..f6cbc78 100644 > --- a/drivers/usb/phy/phy-mxs-usb.c > +++ b/drivers/usb/phy/phy-mxs-usb.c > @@ -1,5 +1,5 @@ > /* > - * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > * Copyright (C) 2012 Marek Vasut <marex@denx.de> > * on behalf of DENX Software Engineering GmbH > * > @@ -20,6 +20,7 @@ > #include <linux/delay.h> > #include <linux/err.h> > #include <linux/io.h> > +#include <linux/of_device.h> > > #define DRIVER_NAME "mxs_phy" > > @@ -34,13 +35,55 @@ > #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) > #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) > > +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > + > +/* Do disconnection between PHY and controller without vbus */ > +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) > + > +/* > + * The PHY will be in messy if there is an wakeup after putting ^^ a Do you mean "messy state"? > + * bus to suspend (set portsc.suspendM) but before setting PHY to low > + * power mode (set portsc.phcd). > + */ Marc
On Tue, Dec 03, 2013 at 03:36:56PM +0800, Peter Chen wrote: > The mxs-phy has several bugs and features at different > versions, the driver code can get it through of_device_id.data. > > Signed-off-by: Peter Chen <peter.chen@freescale.com> > --- > drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------ > 1 files changed, 49 insertions(+), 9 deletions(-) > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > index 545844b..f6cbc78 100644 > --- a/drivers/usb/phy/phy-mxs-usb.c > +++ b/drivers/usb/phy/phy-mxs-usb.c > @@ -1,5 +1,5 @@ > /* > - * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > * Copyright (C) 2012 Marek Vasut <marex@denx.de> > * on behalf of DENX Software Engineering GmbH > * > @@ -20,6 +20,7 @@ > #include <linux/delay.h> > #include <linux/err.h> > #include <linux/io.h> > +#include <linux/of_device.h> > > #define DRIVER_NAME "mxs_phy" > > @@ -34,13 +35,55 @@ > #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) > #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) > > +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > + > +/* Do disconnection between PHY and controller without vbus */ > +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) > + > +/* > + * The PHY will be in messy if there is an wakeup after putting > + * bus to suspend (set portsc.suspendM) but before setting PHY to low > + * power mode (set portsc.phcd). > + */ > +#define MXS_PHY_ABNORAML_IN_SUSPEND BIT(1) ABNORAML? -> ABNORMAL > + > +/* > + * The SOF sends too fast after resuming, it will cause disconnection > + * between host and high speed device. > + */ > +#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) > + > +struct mxs_phy_data { > + unsigned int flags; > +}; > + > +static const struct mxs_phy_data imx23_phy_data = { > + .flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, > +}; ABNORAML? -> ABNORMAL > + > +static const struct mxs_phy_data imx6q_phy_data = { > + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | > + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > +}; > + > +static const struct mxs_phy_data imx6sl_phy_data = { > + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > +}; > + > +static const struct of_device_id mxs_phy_dt_ids[] = { > + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, > + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, > + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > + > struct mxs_phy { > struct usb_phy phy; > struct clk *clk; > + const struct mxs_phy_data *data; > }; > > -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > - > static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) > { > int ret; > @@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device *pdev) > struct clk *clk; > struct mxs_phy *mxs_phy; > int ret; > + const struct of_device_id *of_id = > + of_match_device(mxs_phy_dt_ids, &pdev->dev); > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > base = devm_ioremap_resource(&pdev->dev, res); > @@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device *pdev) > ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); > > mxs_phy->clk = clk; > + mxs_phy->data = of_id->data; > > platform_set_drvdata(pdev, mxs_phy); > > @@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device *pdev) > return 0; > } > > -static const struct of_device_id mxs_phy_dt_ids[] = { > - { .compatible = "fsl,imx23-usbphy", }, > - { /* sentinel */ } > -}; > -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > - > static struct platform_driver mxs_phy_driver = { > .probe = mxs_phy_probe, > .remove = mxs_phy_remove, > -- > 1.7.8 > > >
> > + > > +static const struct mxs_phy_data imx23_phy_data = { > > + .flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, > > +}; > > ABNORAML? -> ABNORMAL > My careless, will change. Thanks. Peter > > + > > +static const struct mxs_phy_data imx6q_phy_data = { > > + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | > > + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > > +}; > > + > > +static const struct mxs_phy_data imx6sl_phy_data = { > > + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, > > +}; > > + > > +static const struct of_device_id mxs_phy_dt_ids[] = { > > + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, > > + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, > > + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > > + > > struct mxs_phy { > > struct usb_phy phy; > > struct clk *clk; > > + const struct mxs_phy_data *data; > > }; > > > > -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > > - > > static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) > > { > > int ret; > > @@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device > *pdev) > > struct clk *clk; > > struct mxs_phy *mxs_phy; > > int ret; > > + const struct of_device_id *of_id = > > + of_match_device(mxs_phy_dt_ids, &pdev->dev); > > > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > base = devm_ioremap_resource(&pdev->dev, res); > > @@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device > *pdev) > > ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); > > > > mxs_phy->clk = clk; > > + mxs_phy->data = of_id->data; > > > > platform_set_drvdata(pdev, mxs_phy); > > > > @@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device > *pdev) > > return 0; > > } > > > > -static const struct of_device_id mxs_phy_dt_ids[] = { > > - { .compatible = "fsl,imx23-usbphy", }, > > - { /* sentinel */ } > > -}; > > -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); > > - > > static struct platform_driver mxs_phy_driver = { > > .probe = mxs_phy_probe, > > .remove = mxs_phy_remove, > > -- > > 1.7.8 > > > > > > > > -- > Pengutronix e.K. | > | > Industrial Linux Solutions | http://www.pengutronix.de/ > | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 > | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 > |
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 545844b..f6cbc78 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -1,5 +1,5 @@ /* - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012-2013 Freescale Semiconductor, Inc. * Copyright (C) 2012 Marek Vasut <marex@denx.de> * on behalf of DENX Software Engineering GmbH * @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of_device.h> #define DRIVER_NAME "mxs_phy" @@ -34,13 +35,55 @@ #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +/* Do disconnection between PHY and controller without vbus */ +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) + +/* + * The PHY will be in messy if there is an wakeup after putting + * bus to suspend (set portsc.suspendM) but before setting PHY to low + * power mode (set portsc.phcd). + */ +#define MXS_PHY_ABNORAML_IN_SUSPEND BIT(1) + +/* + * The SOF sends too fast after resuming, it will cause disconnection + * between host and high speed device. + */ +#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) + +struct mxs_phy_data { + unsigned int flags; +}; + +static const struct mxs_phy_data imx23_phy_data = { + .flags = MXS_PHY_ABNORAML_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, +}; + +static const struct mxs_phy_data imx6q_phy_data = { + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + +static const struct mxs_phy_data imx6sl_phy_data = { + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + struct mxs_phy { struct usb_phy phy; struct clk *clk; + const struct mxs_phy_data *data; }; -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) - static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; @@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device *pdev) struct clk *clk; struct mxs_phy *mxs_phy; int ret; + const struct of_device_id *of_id = + of_match_device(mxs_phy_dt_ids, &pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); @@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device *pdev) ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); mxs_phy->clk = clk; + mxs_phy->data = of_id->data; platform_set_drvdata(pdev, mxs_phy); @@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mxs_phy_dt_ids[] = { - { .compatible = "fsl,imx23-usbphy", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); - static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, .remove = mxs_phy_remove,
The mxs-phy has several bugs and features at different versions, the driver code can get it through of_device_id.data. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------ 1 files changed, 49 insertions(+), 9 deletions(-)