| Message ID | 1386271244-3927-7-git-send-email-tim.kryger@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Dec 5, 2013 at 11:20 AM, Tim Kryger <tim.kryger@linaro.org> wrote: > The frequency for the Kona timer can either be specified through the > device tree or determined by checking the rate of the clock specified > in the device tree. Update the documentation to reflect both ways. > > Signed-off-by: Tim Kryger <tim.kryger@linaro.org> > Reviewed-by: Matt Porter <matt.porter@linaro.org> > --- > Documentation/devicetree/bindings/arm/bcm/kona-timer.txt | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt > index 17d88b2..39adf54 100644 > --- a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt > +++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt > @@ -8,13 +8,18 @@ Required properties: > - DEPRECATED: compatible : "bcm,kona-timer" > - reg : Register range for the timer > - interrupts : interrupt for the timer > +- clocks: phandle + clock specifier pair of the external clock > - clock-frequency: frequency that the clock operates > > +Only one of clocks or clock-frequency should be specified. > + > +Refer to clocks/clock-bindings.txt for generic clock consumer properties. > + > Example: > timer@35006000 { > compatible = "brcm,kona-timer"; > reg = <0x35006000 0x1000>; > interrupts = <0x0 7 0x4>; > - clock-frequency = <32768>; > + clocks = <&hub_timer_clk>; > }; > > -- > 1.8.0.1 > Reviewed-by: Christian Daudt <bcm@fixthebug.org>
diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt index 17d88b2..39adf54 100644 --- a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt +++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt @@ -8,13 +8,18 @@ Required properties: - DEPRECATED: compatible : "bcm,kona-timer" - reg : Register range for the timer - interrupts : interrupt for the timer +- clocks: phandle + clock specifier pair of the external clock - clock-frequency: frequency that the clock operates +Only one of clocks or clock-frequency should be specified. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + Example: timer@35006000 { compatible = "brcm,kona-timer"; reg = <0x35006000 0x1000>; interrupts = <0x0 7 0x4>; - clock-frequency = <32768>; + clocks = <&hub_timer_clk>; };