@@ -32,6 +32,13 @@ config OLD_IRQ_AT91
bool
default false
+config ATMEL_AIC_IRQ
+ bool
+ default USE_OF
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
+
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
@@ -194,7 +201,6 @@ config MACH_AT91RM9200_DT
bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
depends on SOC_AT91RM9200
select USE_OF
- select OLD_IRQ_AT91
help
Select this if you want to experiment device-tree with
an Atmel RM9200 Evaluation Kit.
@@ -203,7 +209,6 @@ config MACH_AT91SAM9_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
depends on SOC_AT91SAM9
select USE_OF
- select OLD_IRQ_AT91
help
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
@@ -212,7 +217,6 @@ config MACH_SAMA5_DT
bool "Atmel SAMA5 Evaluation Kits with device-tree support"
depends on SOC_SAMA5
select USE_OF
- select OLD_IRQ_AT91
select PHYLIB if NETDEVICES
help
Select this if you want to experiment device-tree with
@@ -24,17 +24,6 @@
#include "at91_aic.h"
#include "generic.h"
-
-static const struct of_device_id irq_of_match[] __initconst = {
- { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
- { /*sentinel*/ }
-};
-
-static void __init at91rm9200_dt_init_irq(void)
-{
- of_irq_init(irq_of_match);
-}
-
static const char *at91rm9200_dt_board_compat[] __initdata = {
"atmel,at91rm9200",
NULL
@@ -43,8 +32,6 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
.init_time = at91rm9200_timer_init,
.map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
.init_early = at91rm9200_dt_initialize,
- .init_irq = at91rm9200_dt_init_irq,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END
@@ -20,22 +20,10 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include "at91_aic.h"
#include "board.h"
#include "generic.h"
-static const struct of_device_id irq_of_match[] __initconst = {
-
- { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
- { /*sentinel*/ }
-};
-
-static void __init at91_dt_init_irq(void)
-{
- of_irq_init(irq_of_match);
-}
-
static const char *at91_dt_board_compat[] __initdata = {
"atmel,at91sam9",
NULL
@@ -45,8 +33,6 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
.init_early = at91_dt_initialize,
- .init_irq = at91_dt_init_irq,
.dt_compat = at91_dt_board_compat,
MACHINE_END
@@ -35,17 +35,6 @@ static void __init sama5_dt_timer_init(void)
at91sam926x_pit_init();
}
-static const struct of_device_id irq_of_match[] __initconst = {
-
- { .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init },
- { /*sentinel*/ }
-};
-
-static void __init at91_dt_init_irq(void)
-{
- of_irq_init(irq_of_match);
-}
-
static int ksz9021rn_phy_fixup(struct phy_device *phy)
{
int value;
@@ -82,9 +71,7 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
/* Maintainer: Atmel */
.init_time = sama5_dt_timer_init,
.map_io = at91_map_io,
- .handle_irq = at91_aic5_handle_irq,
.init_early = at91_dt_initialize,
- .init_irq = at91_dt_init_irq,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_dt_board_compat,
MACHINE_END
Add a new Kconfig option for the new AIC driver (drivers/irqchip/irq-atmel-aic.c) and remove selection of OLD_IRQ_AT91 when selecting dt boards. Remove specific irq init code in all dt board files: this init procedure is automatically handled in of_irq_init which is called by the arm irq core code and is in charge of calling the appropriate aic init functions. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> --- arch/arm/mach-at91/Kconfig | 10 +++++++--- arch/arm/mach-at91/board-dt-rm9200.c | 13 ------------- arch/arm/mach-at91/board-dt-sam9.c | 14 -------------- arch/arm/mach-at91/board-dt-sama5.c | 13 ------------- 4 files changed, 7 insertions(+), 43 deletions(-)