new file mode 100644
@@ -0,0 +1,54 @@
+Binding for TI composite clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped composite clock with multiple different sub-types;
+
+a multiplexer clock with multiple input clock signals or parents, one
+of which can be selected as output, this behaves exactly as [2]
+
+an adjustable clock rate divider, this behaves exactly as [3]
+
+a gating function which can be used to enable and disable the output
+clock, this behaves exactly as [4]
+
+The binding must provide a list of the component clocks that shall be
+merged to this clock. The component clocks shall be of one of the
+"ti,*composite*-clock" types.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[3] Documentation/devicetree/bindings/clock/ti/divider.txt
+[4] Documentation/devicetree/bindings/clock/ti/gate.txt
+
+Required properties:
+- compatible : shall be: "ti,composite-clock"
+- clocks : link phandles of component clocks
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Examples:
+
+usb_l4_gate_ick: usb_l4_gate_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-interface-clock";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <5>;
+ reg = <0x0a10>;
+};
+
+usb_l4_div_ick: usb_l4_div_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <4>;
+ ti,max-div = <1>;
+ reg = <0x0a40>;
+ ti,index-starts-at-one;
+};
+
+usb_l4_ick: usb_l4_ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-clock";
+ clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+};
@@ -240,9 +240,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void __iomem **other_reg,
u8 *other_bit);
@@ -1,3 +1,3 @@
ifneq ($(CONFIG_OF),)
-obj-y += clk.o dpll.o autoidle.o
+obj-y += clk.o dpll.o autoidle.o composite.o
endif
new file mode 100644
@@ -0,0 +1,266 @@
+/*
+ * TI composite clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/list.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
+
+static unsigned long ti_composite_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long ti_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return -EINVAL;
+}
+
+static int ti_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ return -EINVAL;
+}
+
+static const struct clk_ops ti_composite_divider_ops = {
+ .recalc_rate = &ti_composite_recalc_rate,
+ .round_rate = &ti_composite_round_rate,
+ .set_rate = &ti_composite_set_rate,
+};
+
+static const struct clk_ops ti_composite_gate_ops = {
+ .enable = &omap2_dflt_clk_enable,
+ .disable = &omap2_dflt_clk_disable,
+ .is_enabled = &omap2_dflt_clk_is_enabled,
+};
+
+struct component_clk {
+ int num_parents;
+ const char **parent_names;
+ struct device_node *node;
+ int type;
+ struct clk_hw *hw;
+ struct list_head link;
+};
+
+static const char * __initconst component_clk_types[] = {
+ "gate", "divider", "mux"
+};
+
+static LIST_HEAD(component_clks);
+
+static struct device_node *_get_component_node(struct device_node *node, int i)
+{
+ int rc;
+ struct of_phandle_args clkspec;
+
+ rc = of_parse_phandle_with_args(node, "clocks", "#clock-cells", i,
+ &clkspec);
+ if (rc)
+ return NULL;
+
+ return clkspec.np;
+}
+
+static struct component_clk *_lookup_component(struct device_node *node)
+{
+ struct component_clk *comp;
+
+ list_for_each_entry(comp, &component_clks, link) {
+ if (comp->node == node)
+ return comp;
+ }
+ return NULL;
+}
+
+struct clk_hw_omap_comp {
+ struct clk_hw hw;
+ struct device_node *comp_nodes[CLK_COMPONENT_TYPE_MAX];
+ struct component_clk *comp_clks[CLK_COMPONENT_TYPE_MAX];
+};
+
+static inline struct clk_hw *_get_hw(struct clk_hw_omap_comp *clk, int idx)
+{
+ if (!clk)
+ return NULL;
+
+ if (!clk->comp_clks[idx])
+ return NULL;
+
+ return clk->comp_clks[idx]->hw;
+}
+
+#define to_clk_hw_comp(_hw) container_of(_hw, struct clk_hw_omap_comp, hw)
+
+static void __init ti_clk_register_composite(struct clk_hw *hw,
+ struct device_node *node)
+{
+ struct clk *clk;
+ struct clk_hw_omap_comp *cclk = to_clk_hw_comp(hw);
+ struct component_clk *comp;
+ int num_parents = 0;
+ const char **parent_names = NULL;
+ int i;
+
+ /* Check for presence of each component clock */
+ for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) {
+ if (!cclk->comp_nodes[i])
+ continue;
+
+ comp = _lookup_component(cclk->comp_nodes[i]);
+ if (!comp) {
+ pr_debug("component %s not ready for %s, retry\n",
+ cclk->comp_nodes[i]->name, node->name);
+ ti_clk_retry_init(node, hw, ti_clk_register_composite);
+ return;
+ }
+ if (cclk->comp_clks[comp->type] != NULL) {
+ pr_err("duplicate component types for %s (%s)!\n",
+ node->name, component_clk_types[comp->type]);
+ goto cleanup;
+ }
+
+ cclk->comp_clks[comp->type] = comp;
+
+ /* Mark this node as found */
+ cclk->comp_nodes[i] = NULL;
+ }
+
+ /* All components exists, proceed with registration */
+ for (i = CLK_COMPONENT_TYPE_MAX - 1; i >= 0; i--) {
+ comp = cclk->comp_clks[i];
+ if (!comp)
+ continue;
+ if (comp->num_parents) {
+ num_parents = comp->num_parents;
+ parent_names = comp->parent_names;
+ break;
+ }
+ }
+
+ if (!num_parents) {
+ pr_err("%s: no parents found for %s!\n", __func__, node->name);
+ goto cleanup;
+ }
+
+ clk = clk_register_composite(NULL, node->name,
+ parent_names, num_parents,
+ _get_hw(cclk, CLK_COMPONENT_TYPE_MUX),
+ &clk_mux_ops,
+ _get_hw(cclk, CLK_COMPONENT_TYPE_DIVIDER),
+ &ti_composite_divider_ops,
+ _get_hw(cclk, CLK_COMPONENT_TYPE_GATE),
+ &ti_composite_gate_ops, 0);
+
+ if (!IS_ERR(clk))
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+cleanup:
+ /* Free component clock list entries */
+ for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) {
+ if (!cclk->comp_clks[i])
+ continue;
+ list_del(&cclk->comp_clks[i]->link);
+ kfree(cclk->comp_clks[i]);
+ }
+
+ kfree(cclk);
+}
+
+static void __init of_ti_composite_clk_setup(struct device_node *node)
+{
+ int num_clks;
+ int i;
+ struct clk_hw_omap_comp *cclk;
+
+ /* Number of component clocks to be put inside this clock */
+ num_clks = of_clk_get_parent_count(node);
+
+ if (num_clks < 1) {
+ pr_err("composite clk %s must have component(s)\n", node->name);
+ return;
+ }
+
+ cclk = kzalloc(sizeof(*cclk), GFP_KERNEL);
+ if (!cclk)
+ return;
+
+ /* Get device node pointers for each component clock */
+ for (i = 0; i < num_clks; i++)
+ cclk->comp_nodes[i] = _get_component_node(node, i);
+
+ ti_clk_register_composite(&cclk->hw, node);
+}
+CLK_OF_DECLARE(ti_composite_clock, "ti,composite-clock",
+ of_ti_composite_clk_setup);
+
+/**
+ * ti_clk_add_component - add a component clock to the pool
+ * @node: device node of the component clock
+ * @hw: hardware clock definition for the component clock
+ * @type: type of the component clock
+ *
+ * Adds a component clock to the list of available components, so that
+ * it can be registered by a composite clock.
+ */
+int __init ti_clk_add_component(struct device_node *node, struct clk_hw *hw,
+ int type)
+{
+ int num_parents;
+ const char **parent_names;
+ struct component_clk *clk;
+ int i;
+
+ num_parents = of_clk_get_parent_count(node);
+
+ if (num_parents < 1) {
+ pr_err("component-clock %s must have parent(s)\n", node->name);
+ return -EINVAL;
+ }
+
+ parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL);
+ if (!parent_names)
+ return -ENOMEM;
+
+ for (i = 0; i < num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(node, i);
+
+ clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+ if (!clk) {
+ kfree(parent_names);
+ return -ENOMEM;
+ }
+
+ clk->num_parents = num_parents;
+ clk->parent_names = parent_names;
+ clk->hw = hw;
+ clk->node = node;
+ clk->type = type;
+ list_add(&clk->link, &component_clks);
+
+ return 0;
+}
@@ -164,6 +164,14 @@ struct clk_hw_omap {
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
+/* Composite clock component types */
+enum {
+ CLK_COMPONENT_TYPE_GATE = 0,
+ CLK_COMPONENT_TYPE_DIVIDER,
+ CLK_COMPONENT_TYPE_MUX,
+ CLK_COMPONENT_TYPE_MAX,
+};
+
/**
* struct ti_dt_clk - OMAP DT clock alias declarations
* @lk: clock lookup definition
@@ -221,6 +229,9 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -228,6 +239,7 @@ void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
ti_of_clk_init_cb_t func);
int of_ti_clk_autoidle_setup(struct device_node *node);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
This is a multipurpose clock node, which contains support for multiple sub-clocks. Uses basic composite clock type to implement the actual functionality, and TI specific gate, mux and divider clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- .../devicetree/bindings/clock/ti/composite.txt | 54 ++++ arch/arm/mach-omap2/clock.h | 3 - drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/composite.c | 266 ++++++++++++++++++++ include/linux/clk/ti.h | 12 + 5 files changed, 333 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/composite.txt create mode 100644 drivers/clk/ti/composite.c