new file mode 100644
@@ -0,0 +1,31 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+ It contains the information of registers in the following order:
+ "control" - contains the control register base address
+ "idlest" - contains the idlest register base address
+
+Examples:
+ apll_pcie_ck: apll_pcie_ck@4a008200 {
+ #clock-cells = <0>;
+ clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+ reg = <0x4a00821c 0x4>, <0x4a008220 0x4>;
+ compatible = "ti,dra7-apll-clock";
+ };
@@ -1,7 +1,7 @@
ifneq ($(CONFIG_OF),)
obj-y += clk.o dpll.o autoidle.o divider.o \
fixed-factor.o gate.o clockdomain.o \
- composite.o mux.o
+ composite.o mux.o apll.o
obj-$(CONFIG_ARCH_OMAP4) += clk-44xx.o
obj-$(CONFIG_SOC_OMAP5) += clk-54xx.o
endif
new file mode 100644
@@ -0,0 +1,219 @@
+/*
+ * OMAP APLL clock support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * J Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#define APLL_FORCE_LOCK 0x1
+#define APLL_AUTO_IDLE 0x2
+#define MAX_APLL_WAIT_TRIES 1000000
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static int dra7_apll_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int r = 0, i = 0;
+ struct dpll_data *ad;
+ const char *clk_name;
+ u8 state = 1;
+ u32 v;
+
+ ad = clk->dpll_data;
+ if (!ad)
+ return -EINVAL;
+
+ clk_name = __clk_get_name(clk->hw.clk);
+
+ state <<= __ffs(ad->idlest_mask);
+
+ /* Check is already locked */
+ v = ti_clk_ll_ops->clk_readl(ad->idlest_reg);
+
+ if ((v & ad->idlest_mask) == state)
+ return r;
+
+ v = ti_clk_ll_ops->clk_readl(ad->control_reg);
+ v &= ~ad->enable_mask;
+ v |= APLL_FORCE_LOCK << __ffs(ad->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, ad->control_reg);
+
+ state <<= __ffs(ad->idlest_mask);
+
+ while (1) {
+ v = ti_clk_ll_ops->clk_readl(ad->idlest_reg);
+ if ((v & ad->idlest_mask) == state)
+ break;
+ if (i > MAX_APLL_WAIT_TRIES)
+ break;
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_APLL_WAIT_TRIES) {
+ pr_warn("clock: %s failed transition to '%s'\n",
+ clk_name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk_name, (state) ? "locked" : "bypassed", i);
+
+ r = 0;
+ }
+
+ return r;
+}
+
+static void dra7_apll_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *ad;
+ u8 state = 1;
+ u32 v;
+
+ ad = clk->dpll_data;
+
+ state <<= __ffs(ad->idlest_mask);
+
+ v = ti_clk_ll_ops->clk_readl(ad->control_reg);
+ v &= ~ad->enable_mask;
+ v |= APLL_AUTO_IDLE << __ffs(ad->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, ad->control_reg);
+}
+
+static int dra7_apll_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *ad;
+ u32 v;
+
+ ad = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(ad->control_reg);
+ v &= ad->enable_mask;
+
+ v >>= __ffs(ad->enable_mask);
+
+ return v == APLL_AUTO_IDLE ? 0 : 1;
+}
+
+static u8 dra7_init_apll_parent(struct clk_hw *hw)
+{
+ return 0;
+}
+
+static const struct clk_ops apll_ck_ops = {
+ .enable = &dra7_apll_enable,
+ .disable = &dra7_apll_disable,
+ .is_enabled = &dra7_apll_is_enabled,
+ .get_parent = &dra7_init_apll_parent,
+};
+
+static void __init omap_clk_register_apll(struct clk_hw *hw,
+ struct device_node *node)
+{
+ struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
+ struct dpll_data *ad = clk_hw->dpll_data;
+ struct clk *clk;
+
+ ad->clk_ref = of_clk_get(node, 0);
+ ad->clk_bypass = of_clk_get(node, 1);
+
+ if (IS_ERR(ad->clk_ref) || IS_ERR(ad->clk_bypass)) {
+ pr_debug("clk-ref or clk-bypass for %s not ready, retry\n",
+ node->name);
+ ti_clk_retry_init(node, hw, omap_clk_register_apll);
+ return;
+ }
+
+ clk = clk_register(NULL, &clk_hw->hw);
+ if (IS_ERR(clk)) {
+ pr_info("failed clk_register for %s (%ld)\n", node->name,
+ PTR_ERR(clk));
+ kfree(clk_hw->dpll_data);
+ kfree(clk_hw->hw.init->parent_names);
+ kfree(clk_hw->hw.init);
+ kfree(clk_hw);
+ } else {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ kfree(clk_hw->hw.init->parent_names);
+ kfree(clk_hw->hw.init);
+ }
+}
+
+static void __init of_dra7_apll_setup(struct device_node *node)
+{
+ struct dpll_data *ad = NULL;
+ struct clk_hw_omap *clk_hw = NULL;
+ struct clk_init_data *init = NULL;
+ const char **parent_names = NULL;
+ int i;
+
+ ad = kzalloc(sizeof(*ad), GFP_KERNEL);
+ clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
+ init = kzalloc(sizeof(*init), GFP_KERNEL);
+ if (!ad || !clk_hw || !init)
+ goto cleanup;
+
+ clk_hw->dpll_data = ad;
+ clk_hw->hw.init = init;
+ clk_hw->flags = MEMMAP_ADDRESSING;
+
+ init->name = node->name;
+ init->ops = &apll_ck_ops;
+
+ init->num_parents = of_clk_get_parent_count(node);
+ if (init->num_parents < 1) {
+ pr_err("dra7 apll %s must have parent(s)\n", node->name);
+ goto cleanup;
+ }
+
+ parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL);
+
+ for (i = 0; i < init->num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(node, i);
+
+ init->parent_names = parent_names;
+
+ ad->control_reg = ti_clk_get_reg_addr(node, 0);
+ ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
+
+ if (!ad->control_reg || !ad->idlest_reg)
+ goto cleanup;
+
+ ad->idlest_mask = 0x1;
+ ad->enable_mask = 0x3;
+
+ omap_clk_register_apll(&clk_hw->hw, node);
+ return;
+
+cleanup:
+ kfree(parent_names);
+ kfree(ad);
+ kfree(clk_hw);
+ kfree(init);
+}
+CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup);