diff mbox

[3/5] ARM: kvm one_reg coproc set and get BE fixes

Message ID 1387524419-4216-4-git-send-email-victor.kamensky@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Victor Kamensky Dec. 20, 2013, 7:26 a.m. UTC
This patch fixes issue of reading and writing
ARM V7 registers values from/to user land. Existing code was designed to
work only in LE case.

struct kvm_one_reg
------------------

registers value passed through kvm_one_reg structure. It is used by
KVM_SET_ONE_REG, KVM_GET_ONE_REG ioctls. Note by looking at structure
itself we cannot tell what is size of register. Note that structure carries
address of user memory, 'addr' where register should be read or written

Setting register (from user-land to kvm)
----------------------------------------

kvm_arm_set_reg takes vcpu and pointer to struct kvm_one_reg which already
read from user space

kvm_arm_set_reg calls set_core_reg or kvm_arm_coproc_set_reg

set_core_reg deals only with 4 bytes registers, it just reads 4 bytes from
user space and store it properly into vcpu->arch.regs

kvm_arm_coproc_set_reg deals with registers of different size. At certain
point code reaches phase where it retrieves description of register by id
and it knows register size, which could be either 4 or 8 bytes. Kernel code
is ready to read values from user space, but destination type may vary. It
could be pointer to 32 bit integer or it could be pointer to 64 bit
integer. And all possible permutation of size and destination pointer are
possible. Depending on destination pointer type, 4 bytes or 8 bytes, two
new helper functions are introduced  - reg_from_user32 and reg_from_user64.
They are used instead of reg_from_user function which could work only in
LE case.

Size  sizeof(*DstInt)   Function used to read from user
   4                4   reg_from_user32
   8                4   reg_from_user32 - read two registers
   4                8   reg_from_user64 - need special handling for BE
   8                8   reg_from_user64

Getting register (to user-land from kvm)
----------------------------------------

Situation with reading registers is similar to writing. Integer pointer
type of register to be copied could be 4 or 8 bytes. And size passed in
struct kvm_one_reg could be 4 or 8. And any permutation is possible.
Depending on src pointer type, 4 bytes or 8 bytes, two new helper functions
are introduced - reg_from_user32 and reg_to_user64. They are used instead
of reg_to_user function, which could work only in LE case.

Size  sizeof(*SrcInt)   Function used to write to user
   4                4   reg_to_user32
   8                4   reg_to_user32 - writes two registers
   4                8   reg_to_user64 - need special handleing for BE
   8                8   reg_to_user64

Note code does assume that it can only deals with 4 or 8 byte registers.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
---
 arch/arm/kvm/coproc.c | 94 +++++++++++++++++++++++++++++++++++++--------------
 1 file changed, 69 insertions(+), 25 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index 78c0885..64b2b94 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -634,17 +634,61 @@  static struct coproc_reg invariant_cp15[] = {
 	{ CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR },
 };
 
-static int reg_from_user(void *val, const void __user *uaddr, u64 id)
+static int reg_from_user64(u64 *val, const void __user *uaddr, u64 id)
+{
+	unsigned long regsize = KVM_REG_SIZE(id);
+	union {
+		u32	word;
+		u64	dword;
+	} tmp = {0};
+
+	if (copy_from_user(&tmp, uaddr, regsize) != 0)
+		return -EFAULT;
+
+	switch (regsize) {
+	case 4:
+		*val = tmp.word;
+		break;
+	case 8:
+		*val = tmp.dword;
+		break;
+	}
+	return 0;
+}
+
+/* Note it may really copy two u32 registers */
+static int reg_from_user32(u32 *val, const void __user *uaddr, u64 id)
 {
-	/* This Just Works because we are little endian. */
 	if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0)
 		return -EFAULT;
 	return 0;
 }
 
-static int reg_to_user(void __user *uaddr, const void *val, u64 id)
+static int reg_to_user64(void __user *uaddr, const u64 *val, u64 id)
+{
+	unsigned long regsize = KVM_REG_SIZE(id);
+	union {
+		u32	word;
+		u64	dword;
+	} tmp;
+
+	switch (regsize) {
+	case 4:
+		tmp.word = *val;
+		break;
+	case 8:
+		tmp.dword = *val;
+		break;
+	}
+
+	if (copy_to_user(uaddr, &tmp, regsize) != 0)
+		return -EFAULT;
+	return 0;
+}
+
+/* Note it may really copy two u32 registers */
+static int reg_to_user32(void __user *uaddr, const u32 *val, u64 id)
 {
-	/* This Just Works because we are little endian. */
 	if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0)
 		return -EFAULT;
 	return 0;
@@ -662,7 +706,7 @@  static int get_invariant_cp15(u64 id, void __user *uaddr)
 	if (!r)
 		return -ENOENT;
 
-	return reg_to_user(uaddr, &r->val, id);
+	return reg_to_user64(uaddr, &r->val, id);
 }
 
 static int set_invariant_cp15(u64 id, void __user *uaddr)
@@ -678,7 +722,7 @@  static int set_invariant_cp15(u64 id, void __user *uaddr)
 	if (!r)
 		return -ENOENT;
 
-	err = reg_from_user(&val, uaddr, id);
+	err = reg_from_user64(&val, uaddr, id);
 	if (err)
 		return err;
 
@@ -846,7 +890,7 @@  static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 	if (vfpid < num_fp_regs()) {
 		if (KVM_REG_SIZE(id) != 8)
 			return -ENOENT;
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid],
+		return reg_to_user64(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid],
 				   id);
 	}
 
@@ -856,22 +900,22 @@  static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 
 	switch (vfpid) {
 	case KVM_REG_ARM_VFP_FPEXC:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id);
+		return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpexc, id);
 	case KVM_REG_ARM_VFP_FPSCR:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id);
+		return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpscr, id);
 	case KVM_REG_ARM_VFP_FPINST:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id);
+		return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpinst, id);
 	case KVM_REG_ARM_VFP_FPINST2:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id);
+		return reg_to_user32(uaddr, &vcpu->arch.vfp_guest.fpinst2, id);
 	case KVM_REG_ARM_VFP_MVFR0:
 		val = fmrx(MVFR0);
-		return reg_to_user(uaddr, &val, id);
+		return reg_to_user32(uaddr, &val, id);
 	case KVM_REG_ARM_VFP_MVFR1:
 		val = fmrx(MVFR1);
-		return reg_to_user(uaddr, &val, id);
+		return reg_to_user32(uaddr, &val, id);
 	case KVM_REG_ARM_VFP_FPSID:
 		val = fmrx(FPSID);
-		return reg_to_user(uaddr, &val, id);
+		return reg_to_user32(uaddr, &val, id);
 	default:
 		return -ENOENT;
 	}
@@ -890,8 +934,8 @@  static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
 	if (vfpid < num_fp_regs()) {
 		if (KVM_REG_SIZE(id) != 8)
 			return -ENOENT;
-		return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid],
-				     uaddr, id);
+		return reg_from_user64(&vcpu->arch.vfp_guest.fpregs[vfpid],
+				       uaddr, id);
 	}
 
 	/* FP control registers are all 32 bit. */
@@ -900,28 +944,28 @@  static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
 
 	switch (vfpid) {
 	case KVM_REG_ARM_VFP_FPEXC:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id);
+		return reg_from_user32(&vcpu->arch.vfp_guest.fpexc, uaddr, id);
 	case KVM_REG_ARM_VFP_FPSCR:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id);
+		return reg_from_user32(&vcpu->arch.vfp_guest.fpscr, uaddr, id);
 	case KVM_REG_ARM_VFP_FPINST:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id);
+		return reg_from_user32(&vcpu->arch.vfp_guest.fpinst, uaddr, id);
 	case KVM_REG_ARM_VFP_FPINST2:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id);
+		return reg_from_user32(&vcpu->arch.vfp_guest.fpinst2, uaddr, id);
 	/* These are invariant. */
 	case KVM_REG_ARM_VFP_MVFR0:
-		if (reg_from_user(&val, uaddr, id))
+		if (reg_from_user32(&val, uaddr, id))
 			return -EFAULT;
 		if (val != fmrx(MVFR0))
 			return -EINVAL;
 		return 0;
 	case KVM_REG_ARM_VFP_MVFR1:
-		if (reg_from_user(&val, uaddr, id))
+		if (reg_from_user32(&val, uaddr, id))
 			return -EFAULT;
 		if (val != fmrx(MVFR1))
 			return -EINVAL;
 		return 0;
 	case KVM_REG_ARM_VFP_FPSID:
-		if (reg_from_user(&val, uaddr, id))
+		if (reg_from_user32(&val, uaddr, id))
 			return -EFAULT;
 		if (val != fmrx(FPSID))
 			return -EINVAL;
@@ -968,7 +1012,7 @@  int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		return get_invariant_cp15(reg->id, uaddr);
 
 	/* Note: copies two regs if size is 64 bit. */
-	return reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id);
+	return reg_to_user32(uaddr, &vcpu->arch.cp15[r->reg], reg->id);
 }
 
 int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
@@ -987,7 +1031,7 @@  int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		return set_invariant_cp15(reg->id, uaddr);
 
 	/* Note: copies two regs if size is 64 bit */
-	return reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id);
+	return reg_from_user32(&vcpu->arch.cp15[r->reg], uaddr, reg->id);
 }
 
 static unsigned int num_demux_regs(void)