@@ -9,6 +9,8 @@ Required properties:
"allwinner,sun4i-osc-clk" - for a gatable oscillator
"allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
+ "allwinner,sun4i-pll5-clk" - for the PLL5 clock
+ "allwinner,sun4i-pll6-clk" - for the PLL6 clock
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
@@ -212,6 +212,40 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
}
/**
+ * sun4i_get_pll5_factors() - calculates n, k factors for PLL5
+ * PLL5 rate is calculated as follows
+ * rate = parent_rate * n * (k + 1)
+ * parent_rate is always 24Mhz
+ */
+
+static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div;
+
+ /* Normalize value to a parent_rate multiple (24M) */
+ div = *freq / parent_rate;
+ *freq = parent_rate * div;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ if (div < 31)
+ *k = 0;
+ else if (div / 2 < 31)
+ *k = 1;
+ else if (div / 3 < 31)
+ *k = 2;
+ else
+ *k = 3;
+
+ *n = DIV_ROUND_UP(div, (*k+1));
+}
+
+
+
+/**
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
* APB1 rate is calculated as follows
* rate = (parent_rate >> p) / (m + 1);
@@ -287,6 +321,13 @@ static struct clk_factors_config sun6i_a31_pll1_config = {
.mwidth = 2,
};
+static struct clk_factors_config sun4i_pll5_config = {
+ .nshift = 8,
+ .nwidth = 5,
+ .kshift = 4,
+ .kwidth = 2,
+};
+
static struct clk_factors_config sun4i_apb1_config = {
.mshift = 0,
.mwidth = 5,
@@ -306,6 +347,12 @@ static const struct factors_data sun6i_a31_pll1_data __initconst = {
.getter = sun6i_a31_get_pll1_factors,
};
+static const struct factors_data sun4i_pll5_data __initconst = {
+ .enable = 31,
+ .table = &sun4i_pll5_config,
+ .getter = sun4i_get_pll5_factors,
+};
+
static const struct factors_data sun4i_apb1_data __initconst = {
.table = &sun4i_apb1_config,
.getter = sun4i_get_apb1_factors,
@@ -621,6 +668,179 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
}
+
+
+/**
+ * sunxi_divs_clk_setup() helper data
+ */
+
+#define SUNXI_DIVS_MAX_QTY 2
+#define SUNXI_DIVISOR_WIDTH 2
+
+struct divs_data {
+ const struct factors_data *factors; /* data for the factor clock */
+ struct {
+ u8 fixed; /* is it a fixed divisor? if not... */
+ struct clk_div_table *table; /* is it a table based divisor? */
+ u8 shift; /* otherwise it's a normal divisor with this shift */
+ u8 pow; /* is it power-of-two based? */
+ u8 gate; /* is it independently gateable? */
+ } div[SUNXI_DIVS_MAX_QTY];
+};
+
+static struct clk_div_table pll6_sata_tbl[] = {
+ { .val = 0, .div = 6, },
+ { .val = 1, .div = 12, },
+ { .val = 2, .div = 18, },
+ { .val = 3, .div = 24, },
+ { } /* sentinel */
+};
+
+static const struct divs_data pll5_divs_data __initconst = {
+ .factors = &sun4i_pll5_data,
+ .div = {
+ { .shift = 0, .pow = 0, }, /* M, DDR */
+ { .shift = 16, .pow = 1, }, /* P, other */
+ }
+};
+
+static const struct divs_data pll6_divs_data __initconst = {
+ .factors = &sun4i_pll5_data,
+ .div = {
+ { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
+ { .fixed = 2 }, /* P, other */
+ }
+};
+
+/**
+ * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks
+ *
+ * These clocks look something like this
+ * ________________________
+ * | ___divisor 1---|----> to consumer
+ * parent >--| pll___/___divisor 2---|----> to consumer
+ * | \_______________|____> to consumer
+ * |________________________|
+ */
+
+static void __init sunxi_divs_clk_setup(struct device_node *node,
+ struct divs_data *data)
+{
+ struct clk_onecell_data *clk_data;
+ const char *parent = node->name;
+ const char *clk_name;
+ struct clk **clks, *pclk;
+ struct clk_hw *gate_hw, *rate_hw;
+ const struct clk_ops *rate_ops;
+ struct clk_gate *gate = NULL;
+ struct clk_fixed_factor *fix_factor;
+ struct clk_divider *divider;
+ void *reg;
+ int i = 0;
+ int flags, clkflags;
+
+ /* Set up factor clock that we will be dividing */
+ pclk = sunxi_factors_clk_setup(node, data->factors);
+
+ reg = of_iomap(node, 0);
+
+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+ if (!clk_data)
+ return;
+
+ clks = kzalloc(SUNXI_DIVS_MAX_QTY * sizeof(struct clk *), GFP_KERNEL);
+ if (!clks)
+ goto free_clkdata;
+
+ clk_data->clks = clks;
+
+ /* It's not a good idea to have automatic reparenting changing
+ * our RAM clock! */
+ clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT;
+
+ for (i = 0; i < SUNXI_DIVS_MAX_QTY; i++) {
+ if (of_property_read_string_index(node, "clock-output-names",
+ i, &clk_name) != 0)
+ break;
+
+ gate_hw = NULL;
+ rate_hw = NULL;
+ rate_ops = NULL;
+
+ /* If this leaf clock can be gated, create a gate */
+ if (data->div[i].gate) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ goto free_clks;
+
+ gate->reg = reg;
+ gate->bit_idx = data->div[i].gate;
+ gate->lock = &clk_lock;
+
+ gate_hw = &gate->hw;
+ }
+
+ /* Leaves can be fixed or configurable divisors */
+ if (data->div[i].fixed) {
+ fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL);
+ if (!fix_factor)
+ goto free_gate;
+
+ fix_factor->mult = 1;
+ fix_factor->div = data->div[i].fixed;
+
+ rate_hw = &fix_factor->hw;
+ rate_ops = &clk_fixed_factor_ops;
+ } else {
+ divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+ if (!divider)
+ goto free_gate;
+
+ flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0;
+
+ divider->reg = reg;
+ divider->shift = data->div[i].shift;
+ divider->width = SUNXI_DIVISOR_WIDTH;
+ divider->flags = flags;
+ divider->lock = &clk_lock;
+ divider->table = data->div[i].table;
+
+ rate_hw = ÷r->hw;
+ rate_ops = &clk_divider_ops;
+ }
+
+ /* Wrap the (potential) gate and the divisor on a composite
+ * clock to unify them */
+ clks[i] = clk_register_composite(NULL, clk_name, &parent, 1,
+ NULL, NULL,
+ rate_hw, rate_ops,
+ gate_hw, &clk_gate_ops,
+ clkflags);
+
+ WARN_ON(IS_ERR(clk_data->clks[i]));
+ clk_register_clkdev(clks[i], clk_name, NULL);
+ }
+
+ /* The last clock available on the getter is the parent */
+ clks[i++] = pclk;
+
+ /* Adjust to the real max */
+ clk_data->clk_num = i;
+
+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ return;
+
+free_gate:
+ kfree(gate);
+free_clks:
+ kfree(clks);
+free_clkdata:
+ kfree(clk_data);
+}
+
+
+
/* Matches for factors clocks */
static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
@@ -638,6 +858,13 @@ static const struct of_device_id clk_div_match[] __initconst = {
{}
};
+/* Matches for divided outputs */
+static const struct of_device_id clk_divs_match[] __initconst = {
+ {.compatible = "allwinner,sun4i-pll5-clk", .data = &pll5_divs_data,},
+ {.compatible = "allwinner,sun4i-pll6-clk", .data = &pll6_divs_data,},
+ {}
+};
+
/* Matches for mux clocks */
static const struct of_device_id clk_mux_match[] __initconst = {
{.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,},
@@ -715,6 +942,9 @@ static void __init sunxi_init_clocks(struct device_node *np)
/* Register divider clocks */
of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
+ /* Register divided output clocks */
+ of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup);
+
/* Register mux clocks */
of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);