new file mode 100644
@@ -0,0 +1,22 @@
+Generic MMIO EHCI controller
+
+Required properties:
+- compatible : "via,vt8500-ehci", "wm,prizm-ehci", or "mmio-ehci"
+- reg : ehci controller register range (address and length)
+- interrupts : ehci controller interrupt
+
+Optional properties:
+- clocks : a list of phandle + clock specifier pairs
+- phys : phandle + phy specifier pair
+- phy-names : "usb"
+
+Example:
+
+ ehci@d8007900 {
+ compatible = "via,vt8500-ehci", "mmio-ehci";
+ reg = <0xd8007900 0x200>;
+ interrupts = <43>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ };
deleted file mode 100644
@@ -1,15 +0,0 @@
-VIA/Wondermedia VT8500 EHCI Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-ehci"
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : ehci controller interrupt
-
-Example:
-
- ehci@d8007900 {
- compatible = "via,vt8500-ehci";
- reg = <0xd8007900 0x200>;
- interrupts = <43>;
- };
deleted file mode 100644
@@ -1,12 +0,0 @@
-VIA VT8500 and Wondermedia WM8xxx SoC USB controllers.
-
-Required properties:
- - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci".
- - reg: Address range of the ehci registers. size should be 0x200
- - interrupts: Should contain the ehci interrupt.
-
-usb: ehci@D8007100 {
- compatible = "wm,prizm-ehci", "usb-ehci";
- reg = <0xD8007100 0x200>;
- interrupts = <1>;
-};
@@ -3,6 +3,7 @@
*
* Copyright 2007 Steven Brown <sbrown@cortland.com>
* Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
*
* Derived from the ohci-ssb driver
* Copyright 2007 Michael Buesch <m@bues.ch>
@@ -18,6 +19,7 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/kernel.h>
@@ -25,6 +27,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
@@ -34,6 +37,12 @@
#define DRIVER_DESC "EHCI generic platform driver"
+#define EHCI_MAX_CLKS 3
+struct ehci_platform_priv {
+ struct clk *clks[EHCI_MAX_CLKS];
+ struct phy *phy;
+};
+
static const char hcd_name[] = "ehci-platform";
static int ehci_platform_reset(struct usb_hcd *hcd)
@@ -64,28 +73,84 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
return 0;
}
+static int ehci_platform_power_on(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct ehci_platform_priv *priv =
+ (struct ehci_platform_priv *)hcd_to_ehci(hcd)->priv;
+ int clk, ret;
+
+ for (clk = 0; priv->clks[clk] && clk < EHCI_MAX_CLKS; clk++) {
+ ret = clk_prepare_enable(priv->clks[clk]);
+ if (ret)
+ goto err_disable_clks;
+ }
+
+ if (priv->phy) {
+ ret = phy_init(priv->phy);
+ if (ret)
+ goto err_disable_clks;
+
+ ret = phy_power_on(priv->phy);
+ if (ret)
+ goto err_exit_phy;
+ }
+
+ return 0;
+
+err_exit_phy:
+ phy_exit(priv->phy);
+err_disable_clks:
+ while (--clk >= 0)
+ clk_disable_unprepare(priv->clks[clk]);
+
+ return ret;
+}
+
+static void ehci_platform_power_off(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct ehci_platform_priv *priv =
+ (struct ehci_platform_priv *)hcd_to_ehci(hcd)->priv;
+ int clk;
+
+ if (priv->phy) {
+ phy_power_off(priv->phy);
+ phy_exit(priv->phy);
+ }
+
+ for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
+ if (priv->clks[clk])
+ clk_disable_unprepare(priv->clks[clk]);
+}
+
static struct hc_driver __read_mostly ehci_platform_hc_driver;
static const struct ehci_driver_overrides platform_overrides __initconst = {
- .reset = ehci_platform_reset,
+ .reset = ehci_platform_reset,
+ .extra_priv_size = sizeof(struct ehci_platform_priv),
};
-static struct usb_ehci_pdata ehci_platform_defaults;
+static struct usb_ehci_pdata ehci_platform_defaults = {
+ .power_on = ehci_platform_power_on,
+ .power_suspend = ehci_platform_power_off,
+ .power_off = ehci_platform_power_off,
+};
static int ehci_platform_probe(struct platform_device *dev)
{
struct usb_hcd *hcd;
struct resource *res_mem;
struct usb_ehci_pdata *pdata;
- int irq;
- int err;
+ struct ehci_platform_priv *priv;
+ int clk, irq, err;
if (usb_disabled())
return -ENODEV;
/*
- * use reasonable defaults so platforms don't have to provide these.
- * with DT probing on ARM, none of these are set.
+ * Use reasonable defaults so platforms don't have to provide these
+ * with DT probing on ARM.
*/
if (!dev_get_platdata(&dev->dev))
dev->dev.platform_data = &ehci_platform_defaults;
@@ -107,17 +172,39 @@ static int ehci_platform_probe(struct platform_device *dev)
return -ENXIO;
}
+ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
+ dev_name(&dev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ priv = (struct ehci_platform_priv *)hcd_to_ehci(hcd)->priv;
+
+ if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
+ priv->phy = devm_phy_get(&dev->dev, "usb");
+ if (IS_ERR(priv->phy)) {
+ err = PTR_ERR(priv->phy);
+ if (err == -EPROBE_DEFER)
+ goto err_put_hcd;
+ priv->phy = NULL;
+ }
+
+ for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
+ priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+ if (IS_ERR(priv->clks[clk])) {
+ err = PTR_ERR(priv->clks[clk]);
+ if (err == -EPROBE_DEFER)
+ goto err_put_clks;
+ priv->clks[clk] = NULL;
+ break;
+ }
+ }
+ }
+
+ platform_set_drvdata(dev, hcd);
if (pdata->power_on) {
err = pdata->power_on(dev);
if (err < 0)
- return err;
- }
-
- hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
- dev_name(&dev->dev));
- if (!hcd) {
- err = -ENOMEM;
- goto err_power;
+ goto err_put_clks;
}
hcd->rsrc_start = res_mem->start;
@@ -126,21 +213,22 @@ static int ehci_platform_probe(struct platform_device *dev)
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
- goto err_put_hcd;
+ goto err_power;
}
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
- goto err_put_hcd;
-
- platform_set_drvdata(dev, hcd);
+ goto err_power;
return err;
-err_put_hcd:
- usb_put_hcd(hcd);
err_power:
if (pdata->power_off)
pdata->power_off(dev);
+err_put_clks:
+ while (--clk >= 0)
+ clk_disable_unprepare(priv->clks[clk]);
+err_put_hcd:
+ usb_put_hcd(hcd);
return err;
}
@@ -206,6 +294,7 @@ static int ehci_platform_resume(struct device *dev)
static const struct of_device_id vt8500_ehci_ids[] = {
{ .compatible = "via,vt8500-ehci", },
{ .compatible = "wm,prizm-ehci", },
+ { .compatible = "mmio-ehci", },
{}
};
Currently ehci-platform is only used in combination with devicetree when used with some Via socs. By extending it to (optionally) get clks and a phy from devicetree, and enabling / disabling those on power_on / off, it can be used more generically. Specifically after this commit it can be used for the ehci controller on Allwinner sunxi SoCs. Somehow we've ended up with 2 device-bindings documents for ehci-platform.c, this patch renames and updates one to mmio-ehci.txt to reflect that this is a generic ehci driver, and removes the other. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../devicetree/bindings/usb/mmio-ehci.txt | 22 ++++ .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 --- .../devicetree/bindings/usb/vt8500-ehci.txt | 12 -- drivers/usb/host/ehci-platform.c | 129 +++++++++++++++++---- 4 files changed, 131 insertions(+), 47 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/mmio-ehci.txt delete mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt delete mode 100644 Documentation/devicetree/bindings/usb/vt8500-ehci.txt