diff mbox

[v6,1/2] ohci-platform: Add support for devicetree instantiation

Message ID 1389802104-17330-2-git-send-email-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans de Goede Jan. 15, 2014, 4:08 p.m. UTC
Add support for ohci-platform instantiation from devicetree, including
optionally getting clks and a phy from devicetree, and enabling / disabling
those on power_on / off.

This should allow using ohci-platform from devicetree in various cases.
Specifically after this commit it can be used for the ohci controller found
on Allwinner sunxi SoCs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
 Documentation/devicetree/bindings/usb/usb-ohci.txt |  22 +++
 drivers/usb/host/ohci-platform.c                   | 164 ++++++++++++++++++---
 2 files changed, 162 insertions(+), 24 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt

Comments

Alan Stern Jan. 15, 2014, 4:30 p.m. UTC | #1
On Wed, 15 Jan 2014, Hans de Goede wrote:

> +static int ohci_platform_power_on(struct platform_device *dev)
> +{
> +	struct usb_hcd *hcd = platform_get_drvdata(dev);
> +	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> +	int clk, ret;
> +
> +	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {

You fixed this one...

> @@ -125,13 +225,22 @@ static int ohci_platform_remove(struct platform_device *dev)
>  {
>  	struct usb_hcd *hcd = platform_get_drvdata(dev);
>  	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
> +	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
> +	int clk;
>  
>  	usb_remove_hcd(hcd);
> -	usb_put_hcd(hcd);
>  
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  
> +	for (clk = 0; priv->clks[clk] && clk < OHCI_MAX_CLKS; clk++)

but not this one.  :-(  Same for the ehci-platform patch.

In fact, it might be easier to make this loop go backward, like
you do in the *_platform_power_off routines.

Is there a devm-type routine that will take care of all this for you?

Alan Stern
Hans de Goede Jan. 15, 2014, 6:58 p.m. UTC | #2
Hi,

On 01/15/2014 05:30 PM, Alan Stern wrote:
> On Wed, 15 Jan 2014, Hans de Goede wrote:
>
>> +static int ohci_platform_power_on(struct platform_device *dev)
>> +{
>> +	struct usb_hcd *hcd = platform_get_drvdata(dev);
>> +	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
>> +	int clk, ret;
>> +
>> +	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
>
> You fixed this one...
>
>> @@ -125,13 +225,22 @@ static int ohci_platform_remove(struct platform_device *dev)
>>   {
>>   	struct usb_hcd *hcd = platform_get_drvdata(dev);
>>   	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
>> +	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
>> +	int clk;
>>
>>   	usb_remove_hcd(hcd);
>> -	usb_put_hcd(hcd);
>>
>>   	if (pdata->power_off)
>>   		pdata->power_off(dev);
>>
>> +	for (clk = 0; priv->clks[clk] && clk < OHCI_MAX_CLKS; clk++)
>
> but not this one.  :-(  Same for the ehci-platform patch.

Oops, sorry about that, v7 coming up.

> In fact, it might be easier to make this loop go backward, like
> you do in the *_platform_power_off routines.

I prefer keep doing things forward here, the backward loop in
power_off is because the disable_unprepare must be done in reverse
order if the prepare_enable calls.

> Is there a devm-type routine that will take care of all this for you?

Nope, the downside of getting the clocks by index rather then by name
is that there are no devm routines for that.

Regards,

Hans
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
new file mode 100644
index 0000000..f9d6c73
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -0,0 +1,22 @@ 
+USB OHCI controllers
+
+Required properties:
+- compatible : "usb-ohci"
+- reg : ohci controller register range (address and length)
+- interrupts : ohci controller interrupt
+
+Optional properties:
+- clocks : a list of phandle + clock specifier pairs
+- phys : phandle + phy specifier pair
+- phy-names : "usb"
+
+Example:
+
+	ohci0: ohci@0x01c14400 {
+		compatible = "allwinner,sun4i-a10-ohci", "usb-ohci";
+		reg = <0x01c14400 0x100>;
+		interrupts = <64>;
+		clocks = <&usb_clk 6>, <&ahb_gates 2>;
+		phys = <&usbphy 1>;
+		phy-names = "usb";
+	};
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index f351ff5..0262b13 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -3,6 +3,7 @@ 
  *
  * Copyright 2007 Michael Buesch <m@bues.ch>
  * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
  *
  * Derived from the OCHI-SSB driver
  * Derived from the OHCI-PCI driver
@@ -14,11 +15,14 @@ 
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
 #include <linux/hrtimer.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/usb.h>
@@ -27,6 +31,13 @@ 
 #include "ohci.h"
 
 #define DRIVER_DESC "OHCI generic platform driver"
+#define OHCI_MAX_CLKS 3
+#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+struct ohci_platform_priv {
+	struct clk *clks[OHCI_MAX_CLKS];
+	struct phy *phy;
+};
 
 static const char hcd_name[] = "ohci-platform";
 
@@ -48,11 +59,67 @@  static int ohci_platform_reset(struct usb_hcd *hcd)
 	return ohci_setup(hcd);
 }
 
+static int ohci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk, ret;
+
+	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	if (priv->phy) {
+		ret = phy_init(priv->phy);
+		if (ret)
+			goto err_disable_clks;
+
+		ret = phy_power_on(priv->phy);
+		if (ret)
+			goto err_exit_phy;
+	}
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+
+	return ret;
+}
+
+static void ohci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
+
+	if (priv->phy) {
+		phy_power_off(priv->phy);
+		phy_exit(priv->phy);
+	}
+
+	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
 static struct hc_driver __read_mostly ohci_platform_hc_driver;
 
 static const struct ohci_driver_overrides platform_overrides __initconst = {
-	.product_desc =	"Generic Platform OHCI controller",
-	.reset =	ohci_platform_reset,
+	.product_desc =		"Generic Platform OHCI controller",
+	.reset =		ohci_platform_reset,
+	.extra_priv_size =	sizeof(struct ohci_platform_priv),
+};
+
+static struct usb_ohci_pdata ohci_platform_defaults = {
+	.power_on =		ohci_platform_power_on,
+	.power_suspend =	ohci_platform_power_off,
+	.power_off =		ohci_platform_power_off,
 };
 
 static int ohci_platform_probe(struct platform_device *dev)
@@ -60,17 +127,23 @@  static int ohci_platform_probe(struct platform_device *dev)
 	struct usb_hcd *hcd;
 	struct resource *res_mem;
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
-	int irq;
-	int err = -ENOMEM;
-
-	if (!pdata) {
-		WARN_ON(1);
-		return -ENODEV;
-	}
+	struct ohci_platform_priv *priv;
+	int err, irq, clk = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
 
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these
+	 * with DT probing on ARM.
+	 */
+	if (!pdata)
+		pdata = &ohci_platform_defaults;
+
+	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
 		dev_err(&dev->dev, "no irq provided");
@@ -83,17 +156,40 @@  static int ohci_platform_probe(struct platform_device *dev)
 		return -ENXIO;
 	}
 
+	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+			dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ohci_priv(hcd);
+
+	if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
+		priv->phy = devm_phy_get(&dev->dev, "usb");
+		if (IS_ERR(priv->phy)) {
+			err = PTR_ERR(priv->phy);
+			if (err == -EPROBE_DEFER)
+				goto err_put_hcd;
+			priv->phy = NULL;
+		}
+
+		for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
+			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+			if (IS_ERR(priv->clks[clk])) {
+				err = PTR_ERR(priv->clks[clk]);
+				if (err == -EPROBE_DEFER)
+					goto err_put_clks;
+				priv->clks[clk] = NULL;
+				break;
+			}
+		}
+	}
+
 	if (pdata->power_on) {
 		err = pdata->power_on(dev);
 		if (err < 0)
-			return err;
-	}
-
-	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-			dev_name(&dev->dev));
-	if (!hcd) {
-		err = -ENOMEM;
-		goto err_power;
+			goto err_put_clks;
 	}
 
 	hcd->rsrc_start = res_mem->start;
@@ -102,21 +198,25 @@  static int ohci_platform_probe(struct platform_device *dev)
 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 	if (IS_ERR(hcd->regs)) {
 		err = PTR_ERR(hcd->regs);
-		goto err_put_hcd;
+		goto err_power;
 	}
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
-		goto err_put_hcd;
-
-	platform_set_drvdata(dev, hcd);
+		goto err_power;
 
 	return err;
 
-err_put_hcd:
-	usb_put_hcd(hcd);
 err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
 
 	return err;
 }
@@ -125,13 +225,22 @@  static int ohci_platform_remove(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
+	for (clk = 0; priv->clks[clk] && clk < OHCI_MAX_CLKS; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
 	return 0;
 }
 
@@ -178,6 +287,12 @@  static int ohci_platform_resume(struct device *dev)
 #define ohci_platform_resume	NULL
 #endif /* CONFIG_PM */
 
+static const struct of_device_id ohci_platform_ids[] = {
+	{ .compatible = "usb-ohci", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ohci_platform_ids);
+
 static const struct platform_device_id ohci_platform_table[] = {
 	{ "ohci-platform", 0 },
 	{ }
@@ -198,6 +313,7 @@  static struct platform_driver ohci_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "ohci-platform",
 		.pm	= &ohci_platform_pm_ops,
+		.of_match_table = ohci_platform_ids,
 	}
 };