| Message ID | 1389979580-14812-1-git-send-email-joshc@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Josh, On 01/17/2014 12:26 PM, Josh Cartwright wrote: [...] > @@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) > #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) > #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) > > -#ifdef CONFIG_PM_SLEEP > +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) Why not #ifdef CONFIG_PM here? Regards, Christopher
Josh Cartwright <joshc@codeaurora.org> writes: > Both the PM_RUNTIME and PM_SLEEP callbacks call into the common > msm_otg_{suspend,resume} routines, however these routines are only being > built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also > depends on msm_hsusb_config_vddcx(), which is only built when > CONFIG_PM_SLEEP. > > Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the > preprocessor conditional, and moving msm_hsusb_config_vddcx(). > > While we're here, eliminate the CONFIG_PM conditional for setting > up the dev_pm_ops. > > This address the following errors Russell King has hit doing randconfig > builds: > > drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend': > drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend' > drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume': > drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume' > > Cc: Ivan T. Ivanov <iivanov@mm-sol.com> > Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> > Signed-off-by: Josh Cartwright <joshc@codeaurora.org> [...] > @@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) > #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) > #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) > > -#ifdef CONFIG_PM_SLEEP > +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) nit: you should just use CONFIG_PM here since that is what it's for. c.f. kernel/power/Kconfig: config PM def_bool y depends on PM_SLEEP || PM_RUNTIME Kevin
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8546c8d..7c7384f 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -159,32 +159,6 @@ put_3p3: return rc; } -#ifdef CONFIG_PM_SLEEP -#define USB_PHY_SUSP_DIG_VOL 500000 -static int msm_hsusb_config_vddcx(int high) -{ - int max_vol = USB_PHY_VDD_DIG_VOL_MAX; - int min_vol; - int ret; - - if (high) - min_vol = USB_PHY_VDD_DIG_VOL_MIN; - else - min_vol = USB_PHY_SUSP_DIG_VOL; - - ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); - if (ret) { - pr_err("%s: unable to set the voltage for regulator " - "HSUSB_VDDCX\n", __func__); - return ret; - } - - pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); - - return ret; -} -#endif - static int msm_hsusb_ldo_set_mode(int on) { int ret = 0; @@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) -#ifdef CONFIG_PM_SLEEP +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) + +#define USB_PHY_SUSP_DIG_VOL 500000 +static int msm_hsusb_config_vddcx(int high) +{ + int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int min_vol; + int ret; + + if (high) + min_vol = USB_PHY_VDD_DIG_VOL_MIN; + else + min_vol = USB_PHY_SUSP_DIG_VOL; + + ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); + if (ret) { + pr_err("%s: unable to set the voltage for regulator " + "HSUSB_VDDCX\n", __func__); + return ret; + } + + pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); + + return ret; +} + static int msm_otg_suspend(struct msm_otg *motg) { struct usb_phy *phy = &motg->phy; @@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev) } #endif -#ifdef CONFIG_PM static const struct dev_pm_ops msm_otg_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, msm_otg_runtime_idle) }; -#endif static struct platform_driver msm_otg_driver = { .remove = msm_otg_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &msm_otg_dev_pm_ops, -#endif }, };
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common msm_otg_{suspend,resume} routines, however these routines are only being built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also depends on msm_hsusb_config_vddcx(), which is only built when CONFIG_PM_SLEEP. Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the preprocessor conditional, and moving msm_hsusb_config_vddcx(). While we're here, eliminate the CONFIG_PM conditional for setting up the dev_pm_ops. This address the following errors Russell King has hit doing randconfig builds: drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend': drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend' drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume': drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume' Cc: Ivan T. Ivanov <iivanov@mm-sol.com> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> --- drivers/usb/phy/phy-msm-usb.c | 57 ++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 31 deletions(-)