diff mbox

[v10] clk: add MOXA ART SoCs clock driver

Message ID 1390308261-4026-1-git-send-email-jonas.jensen@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jonas Jensen Jan. 21, 2014, 12:44 p.m. UTC
MOXA ART SoCs allow to determine PLL output and APB frequencies
by reading registers holding multiplier and divisor information.

Add a clock driver for this SoC.

Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
---

Notes:
    Thanks for the reply Sudeep, changes are in v10.
    
    Changes since v9:
    
    1. rebase drivers/clk/Makefile to next-20140121
    2. remove unnecessary switch
    3. use a more elaborate commit message
    
    Applies to next-20140121

 .../bindings/clock/moxa,moxart-clock.txt           | 48 +++++++++++
 drivers/clk/Makefile                               |  1 +
 drivers/clk/clk-moxart.c                           | 99 ++++++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
 create mode 100644 drivers/clk/clk-moxart.c

Comments

Mark Rutland Jan. 27, 2014, 10:20 a.m. UTC | #1
On Tue, Jan 21, 2014 at 12:44:21PM +0000, Jonas Jensen wrote:
> MOXA ART SoCs allow to determine PLL output and APB frequencies
> by reading registers holding multiplier and divisor information.
> 
> Add a clock driver for this SoC.
> 
> Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
> ---
> 
> Notes:
>     Thanks for the reply Sudeep, changes are in v10.
>     
>     Changes since v9:
>     
>     1. rebase drivers/clk/Makefile to next-20140121
>     2. remove unnecessary switch
>     3. use a more elaborate commit message
>     
>     Applies to next-20140121
> 
>  .../bindings/clock/moxa,moxart-clock.txt           | 48 +++++++++++
>  drivers/clk/Makefile                               |  1 +
>  drivers/clk/clk-moxart.c                           | 99 ++++++++++++++++++++++
>  3 files changed, 148 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
>  create mode 100644 drivers/clk/clk-moxart.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
> new file mode 100644
> index 0000000..242e3fc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
> @@ -0,0 +1,48 @@
> +Device Tree Clock bindings for arch-moxart
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +MOXA ART SoCs allow to determine PLL output and APB frequencies
> +by reading registers holding multiplier and divisor information.
> +
> +
> +PLL:
> +
> +Required properties:
> +- compatible : Must be "moxa,moxart-pll-clock"
> +- #clock-cells : Should be 0
> +- reg : Should contain registers location and length
> +- clocks : Should contain phandle to parent clock

Nit: clocks are referenced with a clock-specifier (which might be zero
cells), not just a phandle.

How about:

clocks: should contain a phandle + clock-specifier for the parent clock

> +
> +Optional properties:
> +- clock-output-names : Should contain clock name
> +
> +
> +APB:
> +
> +Required properties:
> +- compatible : Must be "moxa,moxart-apb-clock"
> +- #clock-cells : Should be 0
> +- reg : Should contain registers location and length
> +- clocks : Should contain phandle to parent clock

Likewise.

> +
> +Optional properties:
> +- clock-output-names : Should contain clock name
> +
> +
> +For example:
> +
> +	clk_pll: clk_pll@98100000 {
> +		compatible = "moxa,moxart-pll-clock";
> +		#clock-cells = <0>;
> +		reg = <0x98100000 0x34>;
> +	};
> +
> +	clk_apb: clk_apb@98100000 {
> +		compatible = "moxa,moxart-apb-clock";
> +		#clock-cells = <0>;
> +		reg = <0x98100000 0x34>;
> +		clocks = <&clk_pll>;
> +	};
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 58b2d72..24361bf 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
>  # SoCs specific
>  obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
>  obj-$(CONFIG_ARCH_EFM32)	+= clk-efm32gg.o
> +obj-$(CONFIG_ARCH_MOXART)	+= clk-moxart.o
>  obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
>  obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
>  obj-$(CONFIG_ARCH_HI3xxx)	+= hisilicon/
> diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
> new file mode 100644
> index 0000000..7021748
> --- /dev/null
> +++ b/drivers/clk/clk-moxart.c
> @@ -0,0 +1,99 @@
> +/*
> + * MOXA ART SoCs clock driver.
> + *
> + * Copyright (C) 2013 Jonas Jensen
> + *
> + * Jonas Jensen <jonas.jensen@gmail.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/clkdev.h>
> +
> +void __init moxart_of_pll_clk_init(struct device_node *node)
> +{
> +	static void __iomem *base;
> +	struct clk *clk, *ref_clk;
> +	unsigned long rate;
> +	unsigned int mul;
> +	const char *name = node->name;
> +
> +	of_property_read_string(node, "clock-output-names", &name);
> +
> +	base = of_iomap(node, 0);
> +	if (!base) {
> +		pr_err("%s: of_iomap failed\n", node->full_name);
> +		return;
> +	}
> +
> +	mul = readl(base + 0x30) >> 3 & 0x3f;
> +	iounmap(base);
> +
> +	ref_clk = of_clk_get(node, 0);
> +	if (IS_ERR(ref_clk)) {
> +		pr_err("%s: of_clk_get failed\n", node->full_name);
> +		return;
> +	}
> +
> +	rate = mul * clk_get_rate(ref_clk);
> +
> +	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);

If this clock has a parent, Surely CLK_IS_ROOT is not appropriate by its
definition:

#define CLK_IS_ROOT             BIT(4) /* root clk, has no parent */

Surely this is a fixed factor clock rather than a fixed rate clock?

> +	if (IS_ERR(clk)) {
> +		pr_err("%s: clk_register_fixed_rate failed\n", node->full_name);
> +		return;
> +	}
> +
> +	clk_register_clkdev(clk, NULL, name);
> +	of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +}
> +CLK_OF_DECLARE(moxart_pll_clock, "moxa,moxart-pll-clock",
> +	       moxart_of_pll_clk_init);
> +
> +void __init moxart_of_apb_clk_init(struct device_node *node)
> +{
> +	static void __iomem *base;
> +	struct clk *clk, *pll_clk;
> +	unsigned long rate;
> +	unsigned int div, val;
> +	unsigned int div_idx[] = { 2, 3, 4, 6, 8};
> +	const char *name = node->name;
> +
> +	of_property_read_string(node, "clock-output-names", &name);
> +
> +	base = of_iomap(node, 0);
> +	if (!base) {
> +		pr_err("%s: of_iomap failed\n", node->full_name);
> +		return;
> +	}
> +
> +	val = readl(base + 0xc) >> 4 & 0x7;
> +	iounmap(base);
> +
> +	if (val > 4)
> +		val = 0;
> +	div = div_idx[val];
> +
> +	pll_clk = of_clk_get(node, 0);
> +	if (IS_ERR(pll_clk)) {
> +		pr_err("%s: of_clk_get failed\n", node->full_name);
> +		return;
> +	}
> +
> +	rate = clk_get_rate(pll_clk) / (div * 2);
> +
> +	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);

Likewise.

Thanks,
Mark.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 0000000..242e3fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,48 @@ 
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+
+PLL:
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle to parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+APB:
+
+Required properties:
+- compatible : Must be "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle to parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+	clk_pll: clk_pll@98100000 {
+		compatible = "moxa,moxart-pll-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+	};
+
+	clk_apb: clk_apb@98100000 {
+		compatible = "moxa,moxart-apb-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+		clocks = <&clk_pll>;
+	};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 58b2d72..24361bf 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -12,6 +12,7 @@  obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 # SoCs specific
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_EFM32)	+= clk-efm32gg.o
+obj-$(CONFIG_ARCH_MOXART)	+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)	+= clk-nomadik.o
 obj-$(CONFIG_ARCH_HIGHBANK)	+= clk-highbank.o
 obj-$(CONFIG_ARCH_HI3xxx)	+= hisilicon/
diff --git a/drivers/clk/clk-moxart.c b/drivers/clk/clk-moxart.c
new file mode 100644
index 0000000..7021748
--- /dev/null
+++ b/drivers/clk/clk-moxart.c
@@ -0,0 +1,99 @@ 
+/*
+ * MOXA ART SoCs clock driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/clkdev.h>
+
+void __init moxart_of_pll_clk_init(struct device_node *node)
+{
+	static void __iomem *base;
+	struct clk *clk, *ref_clk;
+	unsigned long rate;
+	unsigned int mul;
+	const char *name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &name);
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s: of_iomap failed\n", node->full_name);
+		return;
+	}
+
+	mul = readl(base + 0x30) >> 3 & 0x3f;
+	iounmap(base);
+
+	ref_clk = of_clk_get(node, 0);
+	if (IS_ERR(ref_clk)) {
+		pr_err("%s: of_clk_get failed\n", node->full_name);
+		return;
+	}
+
+	rate = mul * clk_get_rate(ref_clk);
+
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk_register_fixed_rate failed\n", node->full_name);
+		return;
+	}
+
+	clk_register_clkdev(clk, NULL, name);
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(moxart_pll_clock, "moxa,moxart-pll-clock",
+	       moxart_of_pll_clk_init);
+
+void __init moxart_of_apb_clk_init(struct device_node *node)
+{
+	static void __iomem *base;
+	struct clk *clk, *pll_clk;
+	unsigned long rate;
+	unsigned int div, val;
+	unsigned int div_idx[] = { 2, 3, 4, 6, 8};
+	const char *name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &name);
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s: of_iomap failed\n", node->full_name);
+		return;
+	}
+
+	val = readl(base + 0xc) >> 4 & 0x7;
+	iounmap(base);
+
+	if (val > 4)
+		val = 0;
+	div = div_idx[val];
+
+	pll_clk = of_clk_get(node, 0);
+	if (IS_ERR(pll_clk)) {
+		pr_err("%s: of_clk_get failed\n", node->full_name);
+		return;
+	}
+
+	rate = clk_get_rate(pll_clk) / (div * 2);
+
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk_register_fixed_rate failed\n", node->full_name);
+		return;
+	}
+
+	clk_register_clkdev(clk, NULL, name);
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(moxart_apb_clock, "moxa,moxart-apb-clock",
+	       moxart_of_apb_clk_init);