diff mbox

ARM: imx: enable delaytimer on the imx timer

Message ID 1390390544-10319-1-git-send-email-bigeasy@linutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Sebastian Andrzej Siewior Jan. 22, 2014, 11:35 a.m. UTC 
The imx can support timer-based delays, so implement this.
Skips past jiffy calibration.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
Tested on imx51.

 arch/arm/mach-imx/time.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Shawn Guo Jan. 28, 2014, 12:03 p.m. UTC | #1 
On Wed, Jan 22, 2014 at 12:35:44PM +0100, Sebastian Andrzej Siewior wrote:
> The imx can support timer-based delays, so implement this.
> Skips past jiffy calibration.
> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index cd46529..19c5cf9 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -25,6 +25,7 @@ 
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/sched_clock.h>
 
@@ -116,11 +117,22 @@  static u32 notrace mxc_read_sched_clock(void)
 	return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
 }
 
+static struct delay_timer imx_delay_timer;
+
+static unsigned long imx_read_current_timer(void)
+{
+	return __raw_readl(sched_clock_reg);
+}
+
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 	void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
 
+	imx_delay_timer.read_current_timer = &imx_read_current_timer;
+	imx_delay_timer.freq = c;
+	register_current_timer_delay(&imx_delay_timer);
+
 	sched_clock_reg = reg;
 
 	setup_sched_clock(mxc_read_sched_clock, 32, c);