diff mbox

[v3,04/15] ARM: at91: prepare common clk transition for sam9261 SoC

Message ID 1390492639-7299-5-git-send-email-jjhiblot@traphandler.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jean-Jacques Hiblot Jan. 23, 2014, 3:57 p.m. UTC
This patch encloses sam9261 old clk registration in
"#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
 arch/arm/mach-at91/at91sam9261.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Comments

Jean-Christophe PLAGNIOL-VILLARD Feb. 7, 2014, 8:25 a.m. UTC | #1
On 16:57 Thu 23 Jan     , Jean-Jacques Hiblot wrote:
>  This patch encloses sam9261 old clk registration in
> "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
>  arch/arm/mach-at91/at91sam9261.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
> index 6a2c869..2c0e940 100644
> --- a/arch/arm/mach-at91/at91sam9261.c
> +++ b/arch/arm/mach-at91/at91sam9261.c
> @@ -25,10 +25,12 @@
>  #include "at91_rstc.h"
>  #include "soc.h"
>  #include "generic.h"
> -#include "clock.h"
>  #include "sam9_smc.h"
>  #include "pm.h"
>  
> +#if defined(CONFIG_OLD_CLK_AT91)
> +#include "clock.h"
> +
>  /* --------------------------------------------------------------------
>   *  Clocks
>   * -------------------------------------------------------------------- */
> @@ -262,7 +264,7 @@ static void __init at91sam9261_register_clocks(void)
>  	clk_register(&hck0);
>  	clk_register(&hck1);
>  }
> -
do this here

#else
#define at91sam9261_register_clocks NULL
> +#endif
>  /* --------------------------------------------------------------------
>   *  GPIO
>   * -------------------------------------------------------------------- */
> @@ -362,6 +364,8 @@ AT91_SOC_START(at91sam9261)
>  	.extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
>  		    | (1 << AT91SAM9261_ID_IRQ2),
>  	.ioremap_registers = at91sam9261_ioremap_registers,
> +#if defined(CONFIG_OLD_CLK_AT91)
>  	.register_clocks = at91sam9261_register_clocks,
> +#endif
so no ifdef here
>  	.init = at91sam9261_initialize,
>  AT91_SOC_END
> -- 
> 1.8.5.2
>
Boris BREZILLON Feb. 7, 2014, 8:35 a.m. UTC | #2
Hello Jean-Christophe,

On 07/02/2014 09:25, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 16:57 Thu 23 Jan     , Jean-Jacques Hiblot wrote:
>>   This patch encloses sam9261 old clk registration in
>> "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
>>
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
>> ---
>>   arch/arm/mach-at91/at91sam9261.c | 8 ++++++--
>>   1 file changed, 6 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
>> index 6a2c869..2c0e940 100644
>> --- a/arch/arm/mach-at91/at91sam9261.c
>> +++ b/arch/arm/mach-at91/at91sam9261.c
>> @@ -25,10 +25,12 @@
>>   #include "at91_rstc.h"
>>   #include "soc.h"
>>   #include "generic.h"
>> -#include "clock.h"
>>   #include "sam9_smc.h"
>>   #include "pm.h"
>>   
>> +#if defined(CONFIG_OLD_CLK_AT91)
>> +#include "clock.h"
>> +
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>>    * -------------------------------------------------------------------- */
>> @@ -262,7 +264,7 @@ static void __init at91sam9261_register_clocks(void)
>>   	clk_register(&hck0);
>>   	clk_register(&hck1);
>>   }
>> -
> do this here
>
> #else
> #define at91sam9261_register_clocks NULL
>> +#endif
>>   /* --------------------------------------------------------------------
>>    *  GPIO
>>    * -------------------------------------------------------------------- */
>> @@ -362,6 +364,8 @@ AT91_SOC_START(at91sam9261)
>>   	.extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
>>   		    | (1 << AT91SAM9261_ID_IRQ2),
>>   	.ioremap_registers = at91sam9261_ioremap_registers,
>> +#if defined(CONFIG_OLD_CLK_AT91)
>>   	.register_clocks = at91sam9261_register_clocks,
>> +#endif
> so no ifdef here

I guess he did this based on what I did for the sama5 SoC, but you're right:
your proposal is cleaner.

Best Regards,

Boris

>>   	.init = at91sam9261_initialize,
>>   AT91_SOC_END
>> -- 
>> 1.8.5.2
>>
Jean-Jacques Hiblot Feb. 7, 2014, 9:38 a.m. UTC | #3
Boris is right, I shamelessly re-used his work with no thought for
modification. BTW thank you Boris for the neat job


2014-02-07 Boris BREZILLON <b.brezillon@overkiz.com>:
> Hello Jean-Christophe,
>
>
> On 07/02/2014 09:25, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>
>> On 16:57 Thu 23 Jan     , Jean-Jacques Hiblot wrote:
>>>
>>>   This patch encloses sam9261 old clk registration in
>>> "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections.
>>>
>>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
>>> ---
>>>   arch/arm/mach-at91/at91sam9261.c | 8 ++++++--
>>>   1 file changed, 6 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-at91/at91sam9261.c
>>> b/arch/arm/mach-at91/at91sam9261.c
>>> index 6a2c869..2c0e940 100644
>>> --- a/arch/arm/mach-at91/at91sam9261.c
>>> +++ b/arch/arm/mach-at91/at91sam9261.c
>>> @@ -25,10 +25,12 @@
>>>   #include "at91_rstc.h"
>>>   #include "soc.h"
>>>   #include "generic.h"
>>> -#include "clock.h"
>>>   #include "sam9_smc.h"
>>>   #include "pm.h"
>>>   +#if defined(CONFIG_OLD_CLK_AT91)
>>> +#include "clock.h"
>>> +
>>>   /* --------------------------------------------------------------------
>>>    *  Clocks
>>>    * --------------------------------------------------------------------
>>> */
>>> @@ -262,7 +264,7 @@ static void __init at91sam9261_register_clocks(void)
>>>         clk_register(&hck0);
>>>         clk_register(&hck1);
>>>   }
>>> -
>>
>> do this here
>>
>> #else
>> #define at91sam9261_register_clocks NULL
>>>
>>> +#endif
>>>   /* --------------------------------------------------------------------
>>>    *  GPIO
>>>    * --------------------------------------------------------------------
>>> */
>>> @@ -362,6 +364,8 @@ AT91_SOC_START(at91sam9261)
>>>         .extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 <<
>>> AT91SAM9261_ID_IRQ1)
>>>                     | (1 << AT91SAM9261_ID_IRQ2),
>>>         .ioremap_registers = at91sam9261_ioremap_registers,
>>> +#if defined(CONFIG_OLD_CLK_AT91)
>>>         .register_clocks = at91sam9261_register_clocks,
>>> +#endif
>>
>> so no ifdef here
>
>
> I guess he did this based on what I did for the sama5 SoC, but you're right:
> your proposal is cleaner.
>
> Best Regards,
>
> Boris
>
>
>>>         .init = at91sam9261_initialize,
>>>   AT91_SOC_END
>>> --
>>> 1.8.5.2
>>>
>
diff mbox

Patch

diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 6a2c869..2c0e940 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -25,10 +25,12 @@ 
 #include "at91_rstc.h"
 #include "soc.h"
 #include "generic.h"
-#include "clock.h"
 #include "sam9_smc.h"
 #include "pm.h"
 
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -262,7 +264,7 @@  static void __init at91sam9261_register_clocks(void)
 	clk_register(&hck0);
 	clk_register(&hck1);
 }
-
+#endif
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -362,6 +364,8 @@  AT91_SOC_START(at91sam9261)
 	.extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 		    | (1 << AT91SAM9261_ID_IRQ2),
 	.ioremap_registers = at91sam9261_ioremap_registers,
+#if defined(CONFIG_OLD_CLK_AT91)
 	.register_clocks = at91sam9261_register_clocks,
+#endif
 	.init = at91sam9261_initialize,
 AT91_SOC_END