| Message ID | 1390935264-23155-1-git-send-email-julien.grall@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 28 Jan 2014, Julien Grall wrote: > Event channels driver needs to be initialized very early. Until now, Xen > initialization was done after all CPUs was bring up. > > We can safely move the initialization to an early initcall. > > Also use a cpu notifier to: > - Register the VCPU when the CPU is prepared > - Enable event channel IRQ when the CPU is running > > Signed-off-by: Julien Grall <julien.grall@linaro.org> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> > --- > Changes in v2: > - Check earlier if the event IRQ is valid > - We can safely register the VCPU when the cpu is booting > --- > arch/arm/xen/enlighten.c | 71 ++++++++++++++++++++++++++++------------------ > 1 file changed, 44 insertions(+), 27 deletions(-) > > diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c > index 293eeea..b96723e 100644 > --- a/arch/arm/xen/enlighten.c > +++ b/arch/arm/xen/enlighten.c > @@ -23,6 +23,7 @@ > #include <linux/of_address.h> > #include <linux/cpuidle.h> > #include <linux/cpufreq.h> > +#include <linux/cpu.h> > > #include <linux/mm.h> > > @@ -154,7 +155,7 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, > } > EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); > > -static void __init xen_percpu_init(void *unused) > +static void xen_percpu_init(void) > { > struct vcpu_register_vcpu_info info; > struct vcpu_info *vcpup; > @@ -193,6 +194,31 @@ static void xen_power_off(void) > BUG(); > } > > +static int xen_cpu_notification(struct notifier_block *self, > + unsigned long action, > + void *hcpu) > +{ > + switch (action) { > + case CPU_STARTING: > + xen_percpu_init(); > + break; > + default: > + break; > + } > + > + return NOTIFY_OK; > +} > + > +static struct notifier_block xen_cpu_notifier = { > + .notifier_call = xen_cpu_notification, > +}; > + > +static irqreturn_t xen_arm_callback(int irq, void *arg) > +{ > + xen_hvm_evtchn_do_upcall(); > + return IRQ_HANDLED; > +} > + > /* > * see Documentation/devicetree/bindings/arm/xen.txt for the > * documentation of the Xen Device Tree format. > @@ -229,6 +255,10 @@ static int __init xen_guest_init(void) > xen_events_irq = irq_of_parse_and_map(node, 0); > pr_info("Xen %s support found, events_irq=%d gnttab_frame=%pa\n", > version, xen_events_irq, &grant_frames); > + > + if (xen_events_irq < 0) > + return -ENODEV; > + > xen_domain_type = XEN_HVM_DOMAIN; > > xen_setup_features(); > @@ -281,9 +311,21 @@ static int __init xen_guest_init(void) > disable_cpuidle(); > disable_cpufreq(); > > + xen_init_IRQ(); > + > + if (request_percpu_irq(xen_events_irq, xen_arm_callback, > + "events", &xen_vcpu)) { > + pr_err("Error request IRQ %d\n", xen_events_irq); > + return -EINVAL; > + } > + > + xen_percpu_init(); > + > + register_cpu_notifier(&xen_cpu_notifier); > + > return 0; > } > -core_initcall(xen_guest_init); > +early_initcall(xen_guest_init); > > static int __init xen_pm_init(void) > { > @@ -297,31 +339,6 @@ static int __init xen_pm_init(void) > } > late_initcall(xen_pm_init); > > -static irqreturn_t xen_arm_callback(int irq, void *arg) > -{ > - xen_hvm_evtchn_do_upcall(); > - return IRQ_HANDLED; > -} > - > -static int __init xen_init_events(void) > -{ > - if (!xen_domain() || xen_events_irq < 0) > - return -ENODEV; > - > - xen_init_IRQ(); > - > - if (request_percpu_irq(xen_events_irq, xen_arm_callback, > - "events", &xen_vcpu)) { > - pr_err("Error requesting IRQ %d\n", xen_events_irq); > - return -EINVAL; > - } > - > - on_each_cpu(xen_percpu_init, NULL, 0); > - > - return 0; > -} > -postcore_initcall(xen_init_events); > - > /* In the hypervisor.S file. */ > EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); > EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); > -- > 1.7.10.4 >
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 293eeea..b96723e 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -23,6 +23,7 @@ #include <linux/of_address.h> #include <linux/cpuidle.h> #include <linux/cpufreq.h> +#include <linux/cpu.h> #include <linux/mm.h> @@ -154,7 +155,7 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); -static void __init xen_percpu_init(void *unused) +static void xen_percpu_init(void) { struct vcpu_register_vcpu_info info; struct vcpu_info *vcpup; @@ -193,6 +194,31 @@ static void xen_power_off(void) BUG(); } +static int xen_cpu_notification(struct notifier_block *self, + unsigned long action, + void *hcpu) +{ + switch (action) { + case CPU_STARTING: + xen_percpu_init(); + break; + default: + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block xen_cpu_notifier = { + .notifier_call = xen_cpu_notification, +}; + +static irqreturn_t xen_arm_callback(int irq, void *arg) +{ + xen_hvm_evtchn_do_upcall(); + return IRQ_HANDLED; +} + /* * see Documentation/devicetree/bindings/arm/xen.txt for the * documentation of the Xen Device Tree format. @@ -229,6 +255,10 @@ static int __init xen_guest_init(void) xen_events_irq = irq_of_parse_and_map(node, 0); pr_info("Xen %s support found, events_irq=%d gnttab_frame=%pa\n", version, xen_events_irq, &grant_frames); + + if (xen_events_irq < 0) + return -ENODEV; + xen_domain_type = XEN_HVM_DOMAIN; xen_setup_features(); @@ -281,9 +311,21 @@ static int __init xen_guest_init(void) disable_cpuidle(); disable_cpufreq(); + xen_init_IRQ(); + + if (request_percpu_irq(xen_events_irq, xen_arm_callback, + "events", &xen_vcpu)) { + pr_err("Error request IRQ %d\n", xen_events_irq); + return -EINVAL; + } + + xen_percpu_init(); + + register_cpu_notifier(&xen_cpu_notifier); + return 0; } -core_initcall(xen_guest_init); +early_initcall(xen_guest_init); static int __init xen_pm_init(void) { @@ -297,31 +339,6 @@ static int __init xen_pm_init(void) } late_initcall(xen_pm_init); -static irqreturn_t xen_arm_callback(int irq, void *arg) -{ - xen_hvm_evtchn_do_upcall(); - return IRQ_HANDLED; -} - -static int __init xen_init_events(void) -{ - if (!xen_domain() || xen_events_irq < 0) - return -ENODEV; - - xen_init_IRQ(); - - if (request_percpu_irq(xen_events_irq, xen_arm_callback, - "events", &xen_vcpu)) { - pr_err("Error requesting IRQ %d\n", xen_events_irq); - return -EINVAL; - } - - on_each_cpu(xen_percpu_init, NULL, 0); - - return 0; -} -postcore_initcall(xen_init_events); - /* In the hypervisor.S file. */ EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
Event channels driver needs to be initialized very early. Until now, Xen initialization was done after all CPUs was bring up. We can safely move the initialization to an early initcall. Also use a cpu notifier to: - Register the VCPU when the CPU is prepared - Enable event channel IRQ when the CPU is running Signed-off-by: Julien Grall <julien.grall@linaro.org> --- Changes in v2: - Check earlier if the event IRQ is valid - We can safely register the VCPU when the cpu is booting --- arch/arm/xen/enlighten.c | 71 ++++++++++++++++++++++++++++------------------ 1 file changed, 44 insertions(+), 27 deletions(-)