@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = {
.enable = &omap2_dflt_clk_enable,
.disable = &omap2_dflt_clk_disable,
.is_enabled = &omap2_dflt_clk_is_enabled,
+ .set_rate = &omap3_clkoutx2_set_rate,
.recalc_rate = &omap3_clkoutx2_recalc,
+ .round_rate = &omap3_clkoutx2_round_rate,
};
static const struct clk_ops dpll4_m5x2_ck_3630_ops = {
@@ -672,6 +672,68 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
return rate;
}
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ const struct dpll_data *dd;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+ struct clk *parent;
+
+ if (!*prate)
+ return 0;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ parent = __clk_get_parent(hw->clk);
+ hw = __clk_get_hw(parent);
+ } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ dd = pclk->dpll_data;
+
+ /* TYPE J does not have a clkoutx2 */
+ if (dd->flags & DPLL_J_TYPE) {
+ *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+ return *prate;
+ }
+
+ WARN_ON(!dd->enable_mask);
+
+ v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* If in bypass, the rate is fixed to the bypass rate*/
+ if (v != OMAP3XXX_EN_DPLL_LOCKED)
+ return *prate;
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+ unsigned long best_parent;
+
+ best_parent = (rate / 2);
+ *prate = __clk_round_rate(__clk_get_parent(hw->clk),
+ best_parent);
+ }
+
+ return *prate * 2;
+}
+
/* OMAP3/4 non-CORE DPLL clkops */
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
.allow_idle = omap3_dpll_allow_idle,
@@ -245,6 +245,10 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
void omap2_init_clk_clkdm(struct clk_hw *clk);
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long parent_rate);
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate);
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
If CLK_SET_RATE_PARENT is set for a clkoutx2 clock, calling clk_set_rate() on the clock "skips" the x2 multiplier as there are no set_rate and round_rate functions defined for the clkoutx2. This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This patch implements set_rate and round_rate for clkoutx2. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- arch/arm/mach-omap2/cclock3xxx_data.c | 2 ++ arch/arm/mach-omap2/dpll3xxx.c | 62 +++++++++++++++++++++++++++++++++++ include/linux/clk/ti.h | 4 +++ 3 files changed, 68 insertions(+)