| Message ID | 1392896673-13627-2-git-send-email-p.zabel@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Feb 20, 2014 at 8:44 AM, Philipp Zabel <p.zabel@pengutronix.de> wrote: > This is needed so that the IPU framebuffer scanout cannot be > starved by VPU or GPU activity. > Some boards like the SabreLite and SabreSD seem to set this in > the DCD already, but the documented register reset values do not > contain the necessary settings. > > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Yes, better to configure it in the kernel than relying on the bootloader to do this setup. Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
On Thu, Feb 20, 2014 at 12:44:33PM +0100, Philipp Zabel wrote: > This is needed so that the IPU framebuffer scanout cannot be > starved by VPU or GPU activity. > Some boards like the SabreLite and SabreSD seem to set this in > the DCD already, but the documented register reset values do not > contain the necessary settings. > > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> I'm fine with the patches, but not sure if I should just apply them since you add 'RFC' tag in there. Shawn > --- > arch/arm/mach-imx/mach-imx6q.c | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c > index 76e5db4..f094bd3 100644 > --- a/arch/arm/mach-imx/mach-imx6q.c > +++ b/arch/arm/mach-imx/mach-imx6q.c > @@ -194,6 +194,32 @@ static void __init imx6q_1588_init(void) > > } > > +static void __init imx6q_axi_init(void) > +{ > + struct regmap *gpr; > + > + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); > + if (!IS_ERR(gpr)) { > + /* Enable the cacheable attribute of VPU and IPU AXI transactions */ > + regmap_update_bits(gpr, IOMUXC_GPR4, > + IMX6Q_GPR4_VPU_WR_CACHE_SEL | IMX6Q_GPR4_VPU_RD_CACHE_SEL | > + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | > + IMX6Q_GPR4_IPU_WR_CACHE_CTL | IMX6Q_GPR4_IPU_RD_CACHE_CTL, > + IMX6Q_GPR4_VPU_WR_CACHE_SEL | IMX6Q_GPR4_VPU_RD_CACHE_SEL | > + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | > + IMX6Q_GPR4_IPU_WR_CACHE_CTL | IMX6Q_GPR4_IPU_RD_CACHE_CTL); > + /* Increase IPU read QoS priority */ > + regmap_update_bits(gpr, IOMUXC_GPR6, > + IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK | IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK, > + (0xf << 16) | (0x7 << 20)); > + regmap_update_bits(gpr, IOMUXC_GPR7, > + IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK | IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK, > + (0xf << 16) | (0x7 << 20)); > + } else { > + pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); > + } > +} > + > static void __init imx6q_init_machine(void) > { > struct device *parent; > @@ -214,6 +240,7 @@ static void __init imx6q_init_machine(void) > imx_anatop_init(); > imx6q_pm_init(); > imx6q_1588_init(); > + imx6q_axi_init(); > } > > #define OCOTP_CFG3 0x440 > -- > 1.8.5.3 >
Hi Shawn, Am Freitag, den 21.02.2014, 10:19 +0800 schrieb Shawn Guo: > On Thu, Feb 20, 2014 at 12:44:33PM +0100, Philipp Zabel wrote: > > This is needed so that the IPU framebuffer scanout cannot be > > starved by VPU or GPU activity. > > Some boards like the SabreLite and SabreSD seem to set this in > > the DCD already, but the documented register reset values do not > > contain the necessary settings. > > > > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > > I'm fine with the patches, but not sure if I should just apply them > since you add 'RFC' tag in there. I'm not sure whether this specific fixed QoS configuration should be imposed on everyone. OTOH, following the principle of least surprise, it's probably better to have this here, out in the open, than included hidden in bootloader DCD tables (or not, depending on the board). So if nobody objects, feel free to apply them. regards Philipp
On Fri, Feb 21, 2014 at 11:28:16AM +0100, Philipp Zabel wrote: > Hi Shawn, > > Am Freitag, den 21.02.2014, 10:19 +0800 schrieb Shawn Guo: > > On Thu, Feb 20, 2014 at 12:44:33PM +0100, Philipp Zabel wrote: > > > This is needed so that the IPU framebuffer scanout cannot be > > > starved by VPU or GPU activity. > > > Some boards like the SabreLite and SabreSD seem to set this in > > > the DCD already, but the documented register reset values do not > > > contain the necessary settings. > > > > > > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > > > > I'm fine with the patches, but not sure if I should just apply them > > since you add 'RFC' tag in there. > > I'm not sure whether this specific fixed QoS configuration should be > imposed on everyone. OTOH, following the principle of least surprise, > it's probably better to have this here, out in the open, than included > hidden in bootloader DCD tables (or not, depending on the board). > So if nobody objects, feel free to apply them. Okay. But can you please fix those unnecessary line-over-80-columns warnings? Shawn
Am Montag, den 24.02.2014, 10:03 +0800 schrieb Shawn Guo: > On Fri, Feb 21, 2014 at 11:28:16AM +0100, Philipp Zabel wrote: > > Hi Shawn, > > > > Am Freitag, den 21.02.2014, 10:19 +0800 schrieb Shawn Guo: > > > On Thu, Feb 20, 2014 at 12:44:33PM +0100, Philipp Zabel wrote: > > > > This is needed so that the IPU framebuffer scanout cannot be > > > > starved by VPU or GPU activity. > > > > Some boards like the SabreLite and SabreSD seem to set this in > > > > the DCD already, but the documented register reset values do not > > > > contain the necessary settings. > > > > > > > > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > > > > > > I'm fine with the patches, but not sure if I should just apply them > > > since you add 'RFC' tag in there. > > > > I'm not sure whether this specific fixed QoS configuration should be > > imposed on everyone. OTOH, following the principle of least surprise, > > it's probably better to have this here, out in the open, than included > > hidden in bootloader DCD tables (or not, depending on the board). > > So if nobody objects, feel free to apply them. > > Okay. But can you please fix those unnecessary line-over-80-columns > warnings? Ok, resent without RFC and with short lines. regards Philipp
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 76e5db4..f094bd3 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -194,6 +194,32 @@ static void __init imx6q_1588_init(void) } +static void __init imx6q_axi_init(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + /* Enable the cacheable attribute of VPU and IPU AXI transactions */ + regmap_update_bits(gpr, IOMUXC_GPR4, + IMX6Q_GPR4_VPU_WR_CACHE_SEL | IMX6Q_GPR4_VPU_RD_CACHE_SEL | + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | + IMX6Q_GPR4_IPU_WR_CACHE_CTL | IMX6Q_GPR4_IPU_RD_CACHE_CTL, + IMX6Q_GPR4_VPU_WR_CACHE_SEL | IMX6Q_GPR4_VPU_RD_CACHE_SEL | + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | + IMX6Q_GPR4_IPU_WR_CACHE_CTL | IMX6Q_GPR4_IPU_RD_CACHE_CTL); + /* Increase IPU read QoS priority */ + regmap_update_bits(gpr, IOMUXC_GPR6, + IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK | IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + regmap_update_bits(gpr, IOMUXC_GPR7, + IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK | IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + } else { + pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); + } +} + static void __init imx6q_init_machine(void) { struct device *parent; @@ -214,6 +240,7 @@ static void __init imx6q_init_machine(void) imx_anatop_init(); imx6q_pm_init(); imx6q_1588_init(); + imx6q_axi_init(); } #define OCOTP_CFG3 0x440
This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity. Some boards like the SabreLite and SabreSD seem to set this in the DCD already, but the documented register reset values do not contain the necessary settings. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- arch/arm/mach-imx/mach-imx6q.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)