diff mbox

[RESEND] ARM: dts: qcom-msm8960-cdp: Add RNG device tree node

Message ID 1392914942-23191-1-git-send-email-svarbanov@mm-sol.com (mailing list archive)
State New, archived
Headers show

Commit Message

Stanimir Varbanov Feb. 20, 2014, 4:49 p.m. UTC 
Add the necessary DT node to probe the rng driver on
msm8960-cdp platform.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm/boot/dts/qcom-msm8960-cdp.dts | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Kumar Gala Feb. 20, 2014, 5:06 p.m. UTC | #1 
On Feb 20, 2014, at 10:49 AM, Stanimir Varbanov <svarbanov@mm-sol.com> wrote:

> Add the necessary DT node to probe the rng driver on
> msm8960-cdp platform.
> 
> Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
> Tested-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
> arch/arm/boot/dts/qcom-msm8960-cdp.dts | 7 +++++++
> 1 file changed, 7 insertions(+)

applied to linux-qcom

(fixed up to apply to qcom-msm8960.dtsi)

- k
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7c30de4fa302..8fda9c90ba97 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -67,4 +67,11 @@ 
 		reg = <0x500000 0x1000>;
 		qcom,controller-type = "pmic-arbiter";
 	};
+
+	rng@1a500000 {
+		compatible = "qcom,prng";
+		reg = <0x1a500000 0x200>;
+		clocks = <&gcc PRNG_CLK>;
+		clock-names = "core";
+	};
 };