| Message ID | 1393234334-14795-2-git-send-email-p.zabel@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Montag, den 24.02.2014, 10:32 +0100 schrieb Philipp Zabel: > This is needed so that the IPU framebuffer scanout cannot be > starved by VPU or GPU activity. > Some boards like the SabreLite and SabreSD seem to set this in > the DCD already, but the documented register reset values do not > contain the necessary settings. > > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > --- > Changes since v1: > - Limited to 80 char lines > - Rebased onto Shawn's for-next > --- > arch/arm/mach-imx/mach-imx6q.c | 34 ++++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c > index 1e12685..66bd498 100644 > --- a/arch/arm/mach-imx/mach-imx6q.c > +++ b/arch/arm/mach-imx/mach-imx6q.c > @@ -228,6 +228,39 @@ put_node: > of_node_put(np); > } > > +static void __init imx6q_axi_init(void) > +{ > + struct regmap *gpr; > + unsigned int mask; > + > + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); > + if (!IS_ERR(gpr)) { > + /* > + /* Enable the cacheable attribute of VPU and IPU ^^ Sorry about that, please ignore this version. regards Philipp
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 1e12685..66bd498 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -228,6 +228,39 @@ put_node: of_node_put(np); } +static void __init imx6q_axi_init(void) +{ + struct regmap *gpr; + unsigned int mask; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + /* + /* Enable the cacheable attribute of VPU and IPU + * AXI transactions. + */ + mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL | + IMX6Q_GPR4_VPU_RD_CACHE_SEL | + IMX6Q_GPR4_VPU_P_WR_CACHE_VAL | + IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK | + IMX6Q_GPR4_IPU_WR_CACHE_CTL | + IMX6Q_GPR4_IPU_RD_CACHE_CTL; + regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask); + + /* Increase IPU read QoS priority */ + regmap_update_bits(gpr, IOMUXC_GPR6, + IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK | + IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + regmap_update_bits(gpr, IOMUXC_GPR7, + IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK | + IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK, + (0xf << 16) | (0x7 << 20)); + } else { + pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); + } +} + static void __init imx6q_init_machine(void) { struct device *parent; @@ -248,6 +281,7 @@ static void __init imx6q_init_machine(void) imx_anatop_init(); cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); imx6q_1588_init(); + imx6q_axi_init(); } #define OCOTP_CFG3 0x440
This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity. Some boards like the SabreLite and SabreSD seem to set this in the DCD already, but the documented register reset values do not contain the necessary settings. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- Changes since v1: - Limited to 80 char lines - Rebased onto Shawn's for-next --- arch/arm/mach-imx/mach-imx6q.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)