diff mbox

[4/7] input: misc: Add driver for AXP20x Power Enable Key

Message ID 1393692352-10839-5-git-send-email-carlo@caione.org (mailing list archive)
State New, archived
Headers show

Commit Message

Carlo Caione March 1, 2014, 4:45 p.m. UTC 
This patch add support for the Power Enable Key found on MFD AXP202 and
AXP209. Besides the basic support for the button, the driver adds two
entries in sysfs to configure the time delay for power on/off.

Signed-off-by: Carlo Caione <carlo@caione.org>
---
 arch/arm/configs/sunxi_defconfig |   2 +
 drivers/input/misc/Kconfig       |  11 ++
 drivers/input/misc/Makefile      |   1 +
 drivers/input/misc/axp20x-pek.c  | 265 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 279 insertions(+)
 create mode 100644 drivers/input/misc/axp20x-pek.c

Comments

Maxime Ripard March 7, 2014, 6:18 p.m. UTC | #1 
On Sat, Mar 01, 2014 at 05:45:49PM +0100, Carlo Caione wrote:
> This patch add support for the Power Enable Key found on MFD AXP202 and
> AXP209. Besides the basic support for the button, the driver adds two
> entries in sysfs to configure the time delay for power on/off.
> 
> Signed-off-by: Carlo Caione <carlo@caione.org>
> ---
>  arch/arm/configs/sunxi_defconfig |   2 +

Again, please provide a separate patch for both sunxi_defconfig and
multi_v7_defconfig.

(This can be the same patches than the one enabling the MFD though)

>  drivers/input/misc/Kconfig       |  11 ++
>  drivers/input/misc/Makefile      |   1 +
>  drivers/input/misc/axp20x-pek.c  | 265 +++++++++++++++++++++++++++++++++++++++
>  4 files changed, 279 insertions(+)
>  create mode 100644 drivers/input/misc/axp20x-pek.c
> 
> diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
> index f8aa7e6..d59c826 100644
> --- a/arch/arm/configs/sunxi_defconfig
> +++ b/arch/arm/configs/sunxi_defconfig
> @@ -39,6 +39,8 @@ CONFIG_SUN4I_EMAC=y
>  # CONFIG_NET_VENDOR_STMICRO is not set
>  # CONFIG_NET_VENDOR_WIZNET is not set
>  # CONFIG_WLAN is not set
> +CONFIG_INPUT_MISC=y
> +CONFIG_INPUT_AXP20X_PEK=y
>  CONFIG_SERIAL_8250=y
>  CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_8250_NR_UARTS=8
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 5f4967d..c9438ac 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -384,6 +384,17 @@ config INPUT_RETU_PWRBUTTON
>  	  To compile this driver as a module, choose M here. The module will
>  	  be called retu-pwrbutton.
>  
> +config INPUT_AXP20X_PEK
> +	tristate "X-Powers AXP20X power button driver"
> +	depends on MFD_AXP20X
> +	help
> +	  Say Y here if you want to enable power key reporting via the
> +	  AXP20X PMIC.
> +
> +	  To compile this driver as a module, choose M here. The module will
> +	  be called axp20x-pek.
> +
> +
>  config INPUT_TWL4030_PWRBUTTON
>  	tristate "TWL4030 Power button Driver"
>  	depends on TWL4030_CORE
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 0ebfb6d..41d5403 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
>  obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
>  obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
>  obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
> +obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
>  obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
>  obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
>  obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
> diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
> new file mode 100644
> index 0000000..799275d
> --- /dev/null
> +++ b/drivers/input/misc/axp20x-pek.c
> @@ -0,0 +1,265 @@
> +/*
> + * axp20x power button driver.
> + *
> + * Copyright (C) 2013 Carlo Caione <carlo@caione.org>
> + *
> + * This file is subject to the terms and conditions of the GNU General
> + * Public License. See the file "COPYING" in the main directory of this
> + * archive for more details.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/irq.h>
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define AXP20X_PEK_STARTUP_MASK		(0xc0)
> +#define AXP20X_PEK_SHUTDOWN_MASK	(0x03)
> +
> +static const char const *startup_time[] = { "128mS", "3S" , "1S", "2S" };
> +static const char const *shutdown_time[] = { "4S", "6S" , "8S", "10S" };

I guess these are seconds. If so, a lowercase s in needed.

> +
> +struct axp20x_pek {
> +	struct axp20x_dev *axp20x;
> +	struct input_dev *input;
> +	int irq_dbr;
> +	int irq_dbf;
> +};
> +
> +struct axp20x_pek_ext_attr {
> +	const char const **str;
> +	unsigned int mask;
> +};
> +
> +static struct axp20x_pek_ext_attr axp20x_pek_startup_ext_attr = {
> +	.str	= startup_time,
> +	.mask	= AXP20X_PEK_STARTUP_MASK,
> +};
> +
> +static struct axp20x_pek_ext_attr axp20x_pek_shutdown_ext_attr = {
> +	.str	= shutdown_time,
> +	.mask	= AXP20X_PEK_SHUTDOWN_MASK,
> +};
> +
> +static struct axp20x_pek_ext_attr *get_axp_ext_attr(struct device_attribute *attr)
> +{
> +	return container_of(attr, struct dev_ext_attribute, attr)->var;
> +}
> +
> +ssize_t axp20x_show_ext_attr(struct device *dev, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
> +	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
> +	unsigned int val;
> +	int ret, i;
> +	int cnt = 0;
> +
> +	ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val);
> +	if (ret != 0)
> +		return ret;
> +
> +	val &= axp20x_ea->mask;
> +	val >>= ffs(axp20x_ea->mask) - 1;
> +
> +	for (i = 0; i < 4; i++) {
> +		if (val == i)
> +			cnt += sprintf(buf + cnt, "[%s] ", axp20x_ea->str[i]);
> +		else
> +			cnt += sprintf(buf + cnt, "%s ", axp20x_ea->str[i]);
> +	}
> +
> +	cnt += sprintf(buf + cnt, "\n");
> +
> +	return cnt;
> +}
> +
> +ssize_t axp20x_store_ext_attr(struct device *dev, struct device_attribute *attr,
> +			      const char *buf, size_t count)
> +{
> +	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
> +	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
> +	char val_str[20];
> +	int ret, i;
> +	size_t len;
> +
> +	val_str[sizeof(val_str) - 1] = '\0';
> +	strncpy(val_str, buf, sizeof(val_str) - 1);
> +	len = strlen(val_str);
> +
> +	if (len && val_str[len - 1] == '\n')
> +		val_str[len - 1] = '\0';
> +
> +	for (i = 0; i < 4; i++) {
> +		if (!strcmp(val_str, axp20x_ea->str[i])) {
> +			ret = regmap_update_bits(axp20x_pek->axp20x->regmap,
> +						 AXP20X_PEK_KEY,
> +						 axp20x_ea->mask, i);
> +			if (ret != 0)
> +				return -EINVAL;
> +			return count;
> +		}
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static struct dev_ext_attribute axp20x_dev_attr_startup = {
> +	.attr	= __ATTR(startup, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
> +	.var	= &axp20x_pek_startup_ext_attr
> +};
> +
> +static struct dev_ext_attribute axp20x_dev_attr_shutdown = {
> +	__ATTR(shutdown, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
> +	&axp20x_pek_shutdown_ext_attr
> +};
> +
> +static struct attribute *dev_attrs[] = {
> +	&axp20x_dev_attr_startup.attr.attr,
> +	&axp20x_dev_attr_shutdown.attr.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group dev_attr_group = {
> +	.attrs	= dev_attrs,
> +};
> +
> +static const struct attribute_group *dev_attr_groups[] = {
> +	&dev_attr_group,
> +	NULL,
> +};
> +
> +static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
> +{
> +	struct input_dev *idev = pwr;
> +	struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
> +
> +	if (irq == axp20x_pek->irq_dbr)
> +		input_report_key(idev, KEY_POWER, true);
> +	else if (irq == axp20x_pek->irq_dbf)
> +		input_report_key(idev, KEY_POWER, false);
> +
> +	input_sync(idev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int axp20x_pek_probe(struct platform_device *pdev)
> +{
> +	struct axp20x_pek *axp20x_pek;
> +	struct axp20x_dev *axp20x;
> +	struct input_dev *idev;
> +	int error;
> +
> +	axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek),
> +				  GFP_KERNEL);
> +	if (!axp20x_pek)
> +		return -ENOMEM;
> +
> +	axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
> +	axp20x = axp20x_pek->axp20x;
> +
> +	axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
> +	if (axp20x_pek->irq_dbr < 0) {
> +		dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n",
> +				axp20x_pek->irq_dbr);
> +		return axp20x_pek->irq_dbr;
> +	}
> +	axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc,
> +						  axp20x_pek->irq_dbr);
> +
> +	axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
> +	if (axp20x_pek->irq_dbf < 0) {
> +		dev_err(&pdev->dev, "No IRQ for PEK_DBF, error=%d\n",
> +				axp20x_pek->irq_dbf);
> +		return axp20x_pek->irq_dbf;
> +	}
> +	axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc,
> +						  axp20x_pek->irq_dbf);
> +
> +	axp20x_pek->input = devm_input_allocate_device(&pdev->dev);
> +	if (!axp20x_pek->input)
> +		return -ENOMEM;
> +
> +	idev = axp20x_pek->input;
> +
> +	idev->name = "axp20x-pek";
> +	idev->phys = "m1kbd/input2";
> +	idev->dev.parent = &pdev->dev;
> +
> +	input_set_capability(idev, EV_KEY, KEY_POWER);
> +
> +	input_set_drvdata(idev, axp20x_pek);
> +
> +	error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbr,
> +					  NULL, axp20x_pek_irq, 0,
> +					  "axp20x-pek-dbr", idev);
> +	if (error) {
> +		dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n",
> +			axp20x_pek->irq_dbr, error);
> +
> +		return error;
> +	}
> +
> +	error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbf,
> +					  NULL, axp20x_pek_irq, 0,
> +					  "axp20x-pek-dbf", idev);
> +	if (error) {
> +		dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n",
> +			axp20x_pek->irq_dbf, error);
> +		return error;
> +	}
> +
> +	idev->dev.groups = dev_attr_groups;
> +	error = input_register_device(idev);
> +	if (error) {
> +		dev_err(axp20x->dev, "Can't register input device: %d\n", error);
> +		return error;
> +	}
> +
> +	platform_set_drvdata(pdev, axp20x_pek);
> +
> +	return 0;
> +}
> +
> +static int axp20x_pek_remove(struct platform_device *pdev)
> +{
> +	struct axp20x_pek *axp20x_pek = platform_get_drvdata(pdev);
> +
> +	input_unregister_device(axp20x_pek->input);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id axp20x_pek_match[] = {
> +	{ .compatible = "x-powers,axp20x-pek", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, axp20x_pek_match);
> +
> +static struct platform_driver axp20x_pek_driver = {
> +	.probe		= axp20x_pek_probe,
> +	.remove		= axp20x_pek_remove,
> +	.driver		= {
> +		.name		= "axp20x-pek",
> +		.owner		= THIS_MODULE,
> +		.of_match_table	= axp20x_pek_match,
> +	},
> +};
> +module_platform_driver(axp20x_pek_driver);
> +
> +MODULE_DESCRIPTION("axp20x Power Button");
> +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
> +MODULE_LICENSE("GPL");
> -- 
> 1.8.3.2
>
diff mbox

Patch

diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index f8aa7e6..d59c826 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -39,6 +39,8 @@  CONFIG_SUN4I_EMAC=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AXP20X_PEK=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5f4967d..c9438ac 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -384,6 +384,17 @@  config INPUT_RETU_PWRBUTTON
 	  To compile this driver as a module, choose M here. The module will
 	  be called retu-pwrbutton.
 
+config INPUT_AXP20X_PEK
+	tristate "X-Powers AXP20X power button driver"
+	depends on MFD_AXP20X
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  AXP20X PMIC.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called axp20x-pek.
+
+
 config INPUT_TWL4030_PWRBUTTON
 	tristate "TWL4030 Power button Driver"
 	depends on TWL4030_CORE
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0ebfb6d..41d5403 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -49,6 +49,7 @@  obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
+obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
new file mode 100644
index 0000000..799275d
--- /dev/null
+++ b/drivers/input/misc/axp20x-pek.c
@@ -0,0 +1,265 @@ 
+/*
+ * axp20x power button driver.
+ *
+ * Copyright (C) 2013 Carlo Caione <carlo@caione.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define AXP20X_PEK_STARTUP_MASK		(0xc0)
+#define AXP20X_PEK_SHUTDOWN_MASK	(0x03)
+
+static const char const *startup_time[] = { "128mS", "3S" , "1S", "2S" };
+static const char const *shutdown_time[] = { "4S", "6S" , "8S", "10S" };
+
+struct axp20x_pek {
+	struct axp20x_dev *axp20x;
+	struct input_dev *input;
+	int irq_dbr;
+	int irq_dbf;
+};
+
+struct axp20x_pek_ext_attr {
+	const char const **str;
+	unsigned int mask;
+};
+
+static struct axp20x_pek_ext_attr axp20x_pek_startup_ext_attr = {
+	.str	= startup_time,
+	.mask	= AXP20X_PEK_STARTUP_MASK,
+};
+
+static struct axp20x_pek_ext_attr axp20x_pek_shutdown_ext_attr = {
+	.str	= shutdown_time,
+	.mask	= AXP20X_PEK_SHUTDOWN_MASK,
+};
+
+static struct axp20x_pek_ext_attr *get_axp_ext_attr(struct device_attribute *attr)
+{
+	return container_of(attr, struct dev_ext_attribute, attr)->var;
+}
+
+ssize_t axp20x_show_ext_attr(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
+	unsigned int val;
+	int ret, i;
+	int cnt = 0;
+
+	ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val);
+	if (ret != 0)
+		return ret;
+
+	val &= axp20x_ea->mask;
+	val >>= ffs(axp20x_ea->mask) - 1;
+
+	for (i = 0; i < 4; i++) {
+		if (val == i)
+			cnt += sprintf(buf + cnt, "[%s] ", axp20x_ea->str[i]);
+		else
+			cnt += sprintf(buf + cnt, "%s ", axp20x_ea->str[i]);
+	}
+
+	cnt += sprintf(buf + cnt, "\n");
+
+	return cnt;
+}
+
+ssize_t axp20x_store_ext_attr(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
+	char val_str[20];
+	int ret, i;
+	size_t len;
+
+	val_str[sizeof(val_str) - 1] = '\0';
+	strncpy(val_str, buf, sizeof(val_str) - 1);
+	len = strlen(val_str);
+
+	if (len && val_str[len - 1] == '\n')
+		val_str[len - 1] = '\0';
+
+	for (i = 0; i < 4; i++) {
+		if (!strcmp(val_str, axp20x_ea->str[i])) {
+			ret = regmap_update_bits(axp20x_pek->axp20x->regmap,
+						 AXP20X_PEK_KEY,
+						 axp20x_ea->mask, i);
+			if (ret != 0)
+				return -EINVAL;
+			return count;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static struct dev_ext_attribute axp20x_dev_attr_startup = {
+	.attr	= __ATTR(startup, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
+	.var	= &axp20x_pek_startup_ext_attr
+};
+
+static struct dev_ext_attribute axp20x_dev_attr_shutdown = {
+	__ATTR(shutdown, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
+	&axp20x_pek_shutdown_ext_attr
+};
+
+static struct attribute *dev_attrs[] = {
+	&axp20x_dev_attr_startup.attr.attr,
+	&axp20x_dev_attr_shutdown.attr.attr,
+	NULL,
+};
+
+static struct attribute_group dev_attr_group = {
+	.attrs	= dev_attrs,
+};
+
+static const struct attribute_group *dev_attr_groups[] = {
+	&dev_attr_group,
+	NULL,
+};
+
+static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
+{
+	struct input_dev *idev = pwr;
+	struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
+
+	if (irq == axp20x_pek->irq_dbr)
+		input_report_key(idev, KEY_POWER, true);
+	else if (irq == axp20x_pek->irq_dbf)
+		input_report_key(idev, KEY_POWER, false);
+
+	input_sync(idev);
+
+	return IRQ_HANDLED;
+}
+
+static int axp20x_pek_probe(struct platform_device *pdev)
+{
+	struct axp20x_pek *axp20x_pek;
+	struct axp20x_dev *axp20x;
+	struct input_dev *idev;
+	int error;
+
+	axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek),
+				  GFP_KERNEL);
+	if (!axp20x_pek)
+		return -ENOMEM;
+
+	axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
+	axp20x = axp20x_pek->axp20x;
+
+	axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
+	if (axp20x_pek->irq_dbr < 0) {
+		dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n",
+				axp20x_pek->irq_dbr);
+		return axp20x_pek->irq_dbr;
+	}
+	axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbr);
+
+	axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
+	if (axp20x_pek->irq_dbf < 0) {
+		dev_err(&pdev->dev, "No IRQ for PEK_DBF, error=%d\n",
+				axp20x_pek->irq_dbf);
+		return axp20x_pek->irq_dbf;
+	}
+	axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbf);
+
+	axp20x_pek->input = devm_input_allocate_device(&pdev->dev);
+	if (!axp20x_pek->input)
+		return -ENOMEM;
+
+	idev = axp20x_pek->input;
+
+	idev->name = "axp20x-pek";
+	idev->phys = "m1kbd/input2";
+	idev->dev.parent = &pdev->dev;
+
+	input_set_capability(idev, EV_KEY, KEY_POWER);
+
+	input_set_drvdata(idev, axp20x_pek);
+
+	error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbr,
+					  NULL, axp20x_pek_irq, 0,
+					  "axp20x-pek-dbr", idev);
+	if (error) {
+		dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n",
+			axp20x_pek->irq_dbr, error);
+
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbf,
+					  NULL, axp20x_pek_irq, 0,
+					  "axp20x-pek-dbf", idev);
+	if (error) {
+		dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n",
+			axp20x_pek->irq_dbf, error);
+		return error;
+	}
+
+	idev->dev.groups = dev_attr_groups;
+	error = input_register_device(idev);
+	if (error) {
+		dev_err(axp20x->dev, "Can't register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, axp20x_pek);
+
+	return 0;
+}
+
+static int axp20x_pek_remove(struct platform_device *pdev)
+{
+	struct axp20x_pek *axp20x_pek = platform_get_drvdata(pdev);
+
+	input_unregister_device(axp20x_pek->input);
+
+	return 0;
+}
+
+static const struct of_device_id axp20x_pek_match[] = {
+	{ .compatible = "x-powers,axp20x-pek", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, axp20x_pek_match);
+
+static struct platform_driver axp20x_pek_driver = {
+	.probe		= axp20x_pek_probe,
+	.remove		= axp20x_pek_remove,
+	.driver		= {
+		.name		= "axp20x-pek",
+		.owner		= THIS_MODULE,
+		.of_match_table	= axp20x_pek_match,
+	},
+};
+module_platform_driver(axp20x_pek_driver);
+
+MODULE_DESCRIPTION("axp20x Power Button");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");