diff mbox

ARM: i.MX: mx21ads: Replace direct handling of peripheral bits with GPIOs

Message ID 1393871864-25223-1-git-send-email-shc_work@mail.ru (mailing list archive)
State New, archived
Headers show

Commit Message

Alexander Shiyan March 3, 2014, 6:37 p.m. UTC
This patch replaces direct handling of peripheral bits with GPIOs by
using basic-mmio-gpio driver. As a result this change eliminate some
low-level code and removes custom io_map() from the board.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++--------------------
 1 file changed, 66 insertions(+), 70 deletions(-)

Comments

Shawn Guo March 5, 2014, 5:56 a.m. UTC | #1
On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote:
> This patch replaces direct handling of peripheral bits with GPIOs by
> using basic-mmio-gpio driver. As a result this change eliminate some
> low-level code and removes custom io_map() from the board.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
>  arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++--------------------
>  1 file changed, 66 insertions(+), 70 deletions(-)

I'm generally not fond of taking patches that touch the legacy board
file unless they're fixing or cleaning up something.  Since it looks
like a cleanup, I will probably take it.  But did you test the change on
hardware?

Shawn

> 
> diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
> index a06aa4d..8742594 100644
> --- a/arch/arm/mach-imx/mach-mx21ads.c
> +++ b/arch/arm/mach-imx/mach-mx21ads.c
> @@ -17,51 +17,45 @@
>  #include <linux/platform_device.h>
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/physmap.h>
> +#include <linux/basic_mmio_gpio.h>
>  #include <linux/gpio.h>
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
>  #include <asm/mach/time.h>
> -#include <asm/mach/map.h>
>  
>  #include "common.h"
>  #include "devices-imx21.h"
>  #include "hardware.h"
>  #include "iomux-mx21.h"
>  
> -/*
> - * Memory-mapped I/O on MX21ADS base board
> - */
> -#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
> -#define MX21ADS_MMIO_SIZE        0xc00000
> -
> -#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
> -		(MX21ADS_MMIO_BASE_ADDR + (offset))
> +#define MX21ADS_CS8900A_REG		(MX21_CS1_BASE_ADDR + 0x000000)
> +#define MX21ADS_ST16C255_IOBASE_REG	(MX21_CS1_BASE_ADDR + 0x200000)
> +#define MX21ADS_VERSION_REG		(MX21_CS1_BASE_ADDR + 0x400000)
> +#define MX21ADS_IO_REG			(MX21_CS1_BASE_ADDR + 0x800000)
>  
> -#define MX21ADS_CS8900A_MMIO_SIZE   0x200000
> -#define MX21ADS_CS8900A_IRQ_GPIO    IMX_GPIO_NR(5, 11)
> -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
> -#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
> -#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
> +#define MX21ADS_MMC_CD			IMX_GPIO_NR(4, 25)
> +#define MX21ADS_CS8900A_IRQ_GPIO	IMX_GPIO_NR(5, 11)
> +#define MX21ADS_MMGPIO_BASE		(6 * 32)
>  
>  /* MX21ADS_IO_REG bit definitions */
> -#define MX21ADS_IO_SD_WP        0x0001 /* read */
> -#define MX21ADS_IO_TP6          0x0001 /* write */
> -#define MX21ADS_IO_SW_SEL       0x0002 /* read */
> -#define MX21ADS_IO_TP7          0x0002 /* write */
> -#define MX21ADS_IO_RESET_E_UART 0x0004
> -#define MX21ADS_IO_RESET_BASE   0x0008
> -#define MX21ADS_IO_CSI_CTL2     0x0010
> -#define MX21ADS_IO_CSI_CTL1     0x0020
> -#define MX21ADS_IO_CSI_CTL0     0x0040
> -#define MX21ADS_IO_UART1_EN     0x0080
> -#define MX21ADS_IO_UART4_EN     0x0100
> -#define MX21ADS_IO_LCDON        0x0200
> -#define MX21ADS_IO_IRDA_EN      0x0400
> -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
> -#define MX21ADS_IO_IRDA_MD0_B   0x1000
> -#define MX21ADS_IO_IRDA_MD1     0x2000
> -#define MX21ADS_IO_LED4_ON      0x4000
> -#define MX21ADS_IO_LED3_ON      0x8000
> +#define MX21ADS_IO_SD_WP		(MX21ADS_MMGPIO_BASE + 0)
> +#define MX21ADS_IO_TP6			(MX21ADS_IO_SD_WP)
> +#define MX21ADS_IO_SW_SEL		(MX21ADS_MMGPIO_BASE + 1)
> +#define MX21ADS_IO_TP7			(MX21ADS_IO_SW_SEL)
> +#define MX21ADS_IO_RESET_E_UART		(MX21ADS_MMGPIO_BASE + 2)
> +#define MX21ADS_IO_RESET_BASE		(MX21ADS_MMGPIO_BASE + 3)
> +#define MX21ADS_IO_CSI_CTL2		(MX21ADS_MMGPIO_BASE + 4)
> +#define MX21ADS_IO_CSI_CTL1		(MX21ADS_MMGPIO_BASE + 5)
> +#define MX21ADS_IO_CSI_CTL0		(MX21ADS_MMGPIO_BASE + 6)
> +#define MX21ADS_IO_UART1_EN		(MX21ADS_MMGPIO_BASE + 7)
> +#define MX21ADS_IO_UART4_EN		(MX21ADS_MMGPIO_BASE + 8)
> +#define MX21ADS_IO_LCDON		(MX21ADS_MMGPIO_BASE + 9)
> +#define MX21ADS_IO_IRDA_EN		(MX21ADS_MMGPIO_BASE + 10)
> +#define MX21ADS_IO_IRDA_FIR_SEL		(MX21ADS_MMGPIO_BASE + 11)
> +#define MX21ADS_IO_IRDA_MD0_B		(MX21ADS_MMGPIO_BASE + 12)
> +#define MX21ADS_IO_IRDA_MD1		(MX21ADS_MMGPIO_BASE + 13)
> +#define MX21ADS_IO_LED4_ON		(MX21ADS_MMGPIO_BASE + 14)
> +#define MX21ADS_IO_LED3_ON		(MX21ADS_MMGPIO_BASE + 15)
>  
>  static const int mx21ads_pins[] __initconst = {
>  
> @@ -160,7 +154,7 @@ static struct platform_device mx21ads_nor_mtd_device = {
>  };
>  
>  static struct resource mx21ads_cs8900_resources[] __initdata = {
> -	DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
> +	DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, SZ_1K),
>  	/* irq number is run-time assigned */
>  	DEFINE_RES_IRQ(-1),
>  };
> @@ -179,23 +173,39 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = {
>  static const struct imxuart_platform_data uart_pdata_norts __initconst = {
>  };
>  
> +static struct resource mx21ads_mmgpio_resource =
> +	DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
> +
> +static struct bgpio_pdata mx21ads_mmgpio_pdata = {
> +	.base	= MX21ADS_MMGPIO_BASE,
> +	.ngpio	= 16,
> +};
> +
> +static struct platform_device mx21ads_mmgpio = {
> +	.name = "basic-mmio-gpio",
> +	.id = PLATFORM_DEVID_AUTO,
> +	.resource = &mx21ads_mmgpio_resource,
> +	.num_resources = 1,
> +	.dev = {
> +		.platform_data = &mx21ads_mmgpio_pdata,
> +	},
> +};
> +
>  static int mx21ads_fb_init(struct platform_device *pdev)
>  {
> -	u16 tmp;
> +	int ret;
>  
> -	tmp = __raw_readw(MX21ADS_IO_REG);
> -	tmp |= MX21ADS_IO_LCDON;
> -	__raw_writew(tmp, MX21ADS_IO_REG);
> -	return 0;
> +	ret = gpio_request(MX21ADS_IO_LCDON, "fb-lcdon");
> +	if (ret)
> +		return ret;
> +
> +	return gpio_direction_output(MX21ADS_IO_LCDON, 1);
>  }
>  
>  static void mx21ads_fb_exit(struct platform_device *pdev)
>  {
> -	u16 tmp;
> -
> -	tmp = __raw_readw(MX21ADS_IO_REG);
> -	tmp &= ~MX21ADS_IO_LCDON;
> -	__raw_writew(tmp, MX21ADS_IO_REG);
> +	gpio_set_value(MX21ADS_IO_LCDON, 0);
> +	gpio_free(MX21ADS_IO_LCDON);
>  }
>  
>  /*
> @@ -236,19 +246,26 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
>  
>  static int mx21ads_sdhc_get_ro(struct device *dev)
>  {
> -	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
> +	return gpio_get_value(MX21ADS_IO_SD_WP);
>  }
>  
>  static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
>  	void *data)
>  {
> -	return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
> -		IRQF_TRIGGER_FALLING, "mmc-detect", data);
> +	int ret;
> +
> +	ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
> +	if (ret)
> +		return ret;
> +
> +	return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
> +			   IRQF_TRIGGER_FALLING, "mmc-detect", data);
>  }
>  
>  static void mx21ads_sdhc_exit(struct device *dev, void *data)
>  {
> -	free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
> +	free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
> +	gpio_free(MX21ADS_IO_SD_WP);
>  }
>  
>  static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
> @@ -264,29 +281,8 @@ mx21ads_nand_board_info __initconst = {
>  	.hw_ecc = 1,
>  };
>  
> -static struct map_desc mx21ads_io_desc[] __initdata = {
> -	/*
> -	 * Memory-mapped I/O on MX21ADS Base board:
> -	 *   - CS8900A Ethernet controller
> -	 *   - ST16C2552CJ UART
> -	 *   - CPU and Base board version
> -	 *   - Base board I/O register
> -	 */
> -	{
> -		.virtual = MX21ADS_MMIO_BASE_ADDR,
> -		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
> -		.length = MX21ADS_MMIO_SIZE,
> -		.type = MT_DEVICE,
> -	},
> -};
> -
> -static void __init mx21ads_map_io(void)
> -{
> -	mx21_map_io();
> -	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
> -}
> -
>  static struct platform_device *platform_devices[] __initdata = {
> +	&mx21ads_mmgpio,
>  	&mx21ads_nor_mtd_device,
>  };
>  
> @@ -321,7 +317,7 @@ static void __init mx21ads_timer_init(void)
>  MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
>  	/* maintainer: Freescale Semiconductor, Inc. */
>  	.atag_offset = 0x100,
> -	.map_io = mx21ads_map_io,
> +	.map_io		= mx21_map_io,
>  	.init_early = imx21_init_early,
>  	.init_irq = mx21_init_irq,
>  	.handle_irq = imx21_handle_irq,
> -- 
> 1.8.3.2
>
Alexander Shiyan March 5, 2014, 6:53 a.m. UTC | #2
?????,  5 ????? 2014, 13:56 +08:00 ?? Shawn Guo <shawn.guo@linaro.org>:
> On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote:
> > This patch replaces direct handling of peripheral bits with GPIOs by
> > using basic-mmio-gpio driver. As a result this change eliminate some
> > low-level code and removes custom io_map() from the board.
> > 
> > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > ---
> >  arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++--------------------
> >  1 file changed, 66 insertions(+), 70 deletions(-)
> 
> I'm generally not fond of taking patches that touch the legacy board
> file unless they're fixing or cleaning up something.  Since it looks
> like a cleanup, I will probably take it.  But did you test the change on
> hardware?

No. Unfortunately I do not have this board. Similar change I did for the
other subarch, and it has been tested
(https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/mach-clps711x/board-p720t.c?id=6d640edeb598dd76c64aa99357d9b59996dcb3bc).

Yes, it is mostly cleanup. The next change to this board will introduce GPIO
regulator (based on this change) for the framebuffer, it will help to remove
".init" and ".exit" hooks for the imxfb driver.

---
Shawn Guo March 5, 2014, 7:01 a.m. UTC | #3
On Wed, Mar 05, 2014 at 10:53:27AM +0400, Alexander Shiyan wrote:
> ?????,  5 ????? 2014, 13:56 +08:00 ?? Shawn Guo <shawn.guo@linaro.org>:
> > On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote:
> > > This patch replaces direct handling of peripheral bits with GPIOs by
> > > using basic-mmio-gpio driver. As a result this change eliminate some
> > > low-level code and removes custom io_map() from the board.
> > > 
> > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > > ---
> > >  arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++--------------------
> > >  1 file changed, 66 insertions(+), 70 deletions(-)
> > 
> > I'm generally not fond of taking patches that touch the legacy board
> > file unless they're fixing or cleaning up something.  Since it looks
> > like a cleanup, I will probably take it.  But did you test the change on
> > hardware?
> 
> No. Unfortunately I do not have this board. Similar change I did for the
> other subarch, and it has been tested
> (https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/mach-clps711x/board-p720t.c?id=6d640edeb598dd76c64aa99357d9b59996dcb3bc).
> 
> Yes, it is mostly cleanup. The next change to this board will introduce GPIO
> regulator (based on this change) for the framebuffer, it will help to remove
> ".init" and ".exit" hooks for the imxfb driver.

Ok, fare enough.  Sascha?

Shawn
Sascha Hauer March 5, 2014, 11:48 a.m. UTC | #4
On Wed, Mar 05, 2014 at 03:01:49PM +0800, Shawn Guo wrote:
> On Wed, Mar 05, 2014 at 10:53:27AM +0400, Alexander Shiyan wrote:
> > ?????,  5 ????? 2014, 13:56 +08:00 ?? Shawn Guo <shawn.guo@linaro.org>:
> > > On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote:
> > > > This patch replaces direct handling of peripheral bits with GPIOs by
> > > > using basic-mmio-gpio driver. As a result this change eliminate some
> > > > low-level code and removes custom io_map() from the board.
> > > > 
> > > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> > > > ---
> > > >  arch/arm/mach-imx/mach-mx21ads.c | 136 +++++++++++++++++++--------------------
> > > >  1 file changed, 66 insertions(+), 70 deletions(-)
> > > 
> > > I'm generally not fond of taking patches that touch the legacy board
> > > file unless they're fixing or cleaning up something.  Since it looks
> > > like a cleanup, I will probably take it.  But did you test the change on
> > > hardware?
> > 
> > No. Unfortunately I do not have this board. Similar change I did for the
> > other subarch, and it has been tested
> > (https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/arch/arm/mach-clps711x/board-p720t.c?id=6d640edeb598dd76c64aa99357d9b59996dcb3bc).
> > 
> > Yes, it is mostly cleanup. The next change to this board will introduce GPIO
> > regulator (based on this change) for the framebuffer, it will help to remove
> > ".init" and ".exit" hooks for the imxfb driver.
> 
> Ok, fare enough.  Sascha?

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Unfortunately I don't have this hardware either.

Sascha
Shawn Guo March 5, 2014, 12:03 p.m. UTC | #5
On Mon, Mar 03, 2014 at 10:37:44PM +0400, Alexander Shiyan wrote:
> This patch replaces direct handling of peripheral bits with GPIOs by
> using basic-mmio-gpio driver. As a result this change eliminate some
> low-level code and removes custom io_map() from the board.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index a06aa4d..8742594 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -17,51 +17,45 @@ 
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
+#include <linux/basic_mmio_gpio.h>
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/mach/map.h>
 
 #include "common.h"
 #include "devices-imx21.h"
 #include "hardware.h"
 #include "iomux-mx21.h"
 
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        0xc00000
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
+#define MX21ADS_CS8900A_REG		(MX21_CS1_BASE_ADDR + 0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG	(MX21_CS1_BASE_ADDR + 0x200000)
+#define MX21ADS_VERSION_REG		(MX21_CS1_BASE_ADDR + 0x400000)
+#define MX21ADS_IO_REG			(MX21_CS1_BASE_ADDR + 0x800000)
 
-#define MX21ADS_CS8900A_MMIO_SIZE   0x200000
-#define MX21ADS_CS8900A_IRQ_GPIO    IMX_GPIO_NR(5, 11)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+#define MX21ADS_MMC_CD			IMX_GPIO_NR(4, 25)
+#define MX21ADS_CS8900A_IRQ_GPIO	IMX_GPIO_NR(5, 11)
+#define MX21ADS_MMGPIO_BASE		(6 * 32)
 
 /* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
+#define MX21ADS_IO_SD_WP		(MX21ADS_MMGPIO_BASE + 0)
+#define MX21ADS_IO_TP6			(MX21ADS_IO_SD_WP)
+#define MX21ADS_IO_SW_SEL		(MX21ADS_MMGPIO_BASE + 1)
+#define MX21ADS_IO_TP7			(MX21ADS_IO_SW_SEL)
+#define MX21ADS_IO_RESET_E_UART		(MX21ADS_MMGPIO_BASE + 2)
+#define MX21ADS_IO_RESET_BASE		(MX21ADS_MMGPIO_BASE + 3)
+#define MX21ADS_IO_CSI_CTL2		(MX21ADS_MMGPIO_BASE + 4)
+#define MX21ADS_IO_CSI_CTL1		(MX21ADS_MMGPIO_BASE + 5)
+#define MX21ADS_IO_CSI_CTL0		(MX21ADS_MMGPIO_BASE + 6)
+#define MX21ADS_IO_UART1_EN		(MX21ADS_MMGPIO_BASE + 7)
+#define MX21ADS_IO_UART4_EN		(MX21ADS_MMGPIO_BASE + 8)
+#define MX21ADS_IO_LCDON		(MX21ADS_MMGPIO_BASE + 9)
+#define MX21ADS_IO_IRDA_EN		(MX21ADS_MMGPIO_BASE + 10)
+#define MX21ADS_IO_IRDA_FIR_SEL		(MX21ADS_MMGPIO_BASE + 11)
+#define MX21ADS_IO_IRDA_MD0_B		(MX21ADS_MMGPIO_BASE + 12)
+#define MX21ADS_IO_IRDA_MD1		(MX21ADS_MMGPIO_BASE + 13)
+#define MX21ADS_IO_LED4_ON		(MX21ADS_MMGPIO_BASE + 14)
+#define MX21ADS_IO_LED3_ON		(MX21ADS_MMGPIO_BASE + 15)
 
 static const int mx21ads_pins[] __initconst = {
 
@@ -160,7 +154,7 @@  static struct platform_device mx21ads_nor_mtd_device = {
 };
 
 static struct resource mx21ads_cs8900_resources[] __initdata = {
-	DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
+	DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, SZ_1K),
 	/* irq number is run-time assigned */
 	DEFINE_RES_IRQ(-1),
 };
@@ -179,23 +173,39 @@  static const struct imxuart_platform_data uart_pdata_rts __initconst = {
 static const struct imxuart_platform_data uart_pdata_norts __initconst = {
 };
 
+static struct resource mx21ads_mmgpio_resource =
+	DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
+
+static struct bgpio_pdata mx21ads_mmgpio_pdata = {
+	.base	= MX21ADS_MMGPIO_BASE,
+	.ngpio	= 16,
+};
+
+static struct platform_device mx21ads_mmgpio = {
+	.name = "basic-mmio-gpio",
+	.id = PLATFORM_DEVID_AUTO,
+	.resource = &mx21ads_mmgpio_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &mx21ads_mmgpio_pdata,
+	},
+};
+
 static int mx21ads_fb_init(struct platform_device *pdev)
 {
-	u16 tmp;
+	int ret;
 
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp |= MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-	return 0;
+	ret = gpio_request(MX21ADS_IO_LCDON, "fb-lcdon");
+	if (ret)
+		return ret;
+
+	return gpio_direction_output(MX21ADS_IO_LCDON, 1);
 }
 
 static void mx21ads_fb_exit(struct platform_device *pdev)
 {
-	u16 tmp;
-
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp &= ~MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
+	gpio_set_value(MX21ADS_IO_LCDON, 0);
+	gpio_free(MX21ADS_IO_LCDON);
 }
 
 /*
@@ -236,19 +246,26 @@  static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
 
 static int mx21ads_sdhc_get_ro(struct device *dev)
 {
-	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+	return gpio_get_value(MX21ADS_IO_SD_WP);
 }
 
 static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
 	void *data)
 {
-	return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
-		IRQF_TRIGGER_FALLING, "mmc-detect", data);
+	int ret;
+
+	ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
+	if (ret)
+		return ret;
+
+	return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
+			   IRQF_TRIGGER_FALLING, "mmc-detect", data);
 }
 
 static void mx21ads_sdhc_exit(struct device *dev, void *data)
 {
-	free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
+	free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
+	gpio_free(MX21ADS_IO_SD_WP);
 }
 
 static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
@@ -264,29 +281,8 @@  mx21ads_nand_board_info __initconst = {
 	.hw_ecc = 1,
 };
 
-static struct map_desc mx21ads_io_desc[] __initdata = {
-	/*
-	 * Memory-mapped I/O on MX21ADS Base board:
-	 *   - CS8900A Ethernet controller
-	 *   - ST16C2552CJ UART
-	 *   - CPU and Base board version
-	 *   - Base board I/O register
-	 */
-	{
-		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
-		.length = MX21ADS_MMIO_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx21ads_map_io(void)
-{
-	mx21_map_io();
-	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
 static struct platform_device *platform_devices[] __initdata = {
+	&mx21ads_mmgpio,
 	&mx21ads_nor_mtd_device,
 };
 
@@ -321,7 +317,7 @@  static void __init mx21ads_timer_init(void)
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
 	.atag_offset = 0x100,
-	.map_io = mx21ads_map_io,
+	.map_io		= mx21_map_io,
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
 	.handle_irq = imx21_handle_irq,