@@ -1367,19 +1367,20 @@ config SERIAL_MXS_AUART_CONSOLE
help
Enable a MXS AUART port to be the system console.
-config SERIAL_XILINX_PS_UART
- tristate "Xilinx PS UART support"
+config SERIAL_CADENCE_UART
+ tristate "Cadence UART support"
depends on OF
select SERIAL_CORE
help
- This driver supports the Xilinx PS UART port.
+ This driver supports the Cadence UART. It is found e.g. in Xilinx
+ Zynq.
-config SERIAL_XILINX_PS_UART_CONSOLE
- bool "Xilinx PS UART console support"
- depends on SERIAL_XILINX_PS_UART=y
+config SERIAL_CADENCE_UART_CONSOLE
+ bool "Cadence UART console support"
+ depends on SERIAL_CADENCE_UART=y
select SERIAL_CORE_CONSOLE
help
- Enable a Xilinx PS UART port to be the system console.
+ Enable a Cadence UART port to be the system console.
config SERIAL_AR933X
tristate "AR933X serial port support"
@@ -19,6 +19,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250/
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+obj-$(CONFIG_SERIAL_CADENCE_UART) += cadence_uart.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
@@ -79,7 +80,6 @@ obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
-obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
new file mode 100644
@@ -0,0 +1,1457 @@
+/*
+ * Cadence UART driver
+ *
+ * 2011 - 2014 (C) Xilinx Inc.
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2 of the License, or (at your option) any
+ * later version.
+ */
+
+#if defined(CONFIG_SERIAL_CADENCE_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+#define CDNS_UART_TTY_NAME "ttyPS"
+#define CDNS_UART_NAME "cdns_uart"
+#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS 2
+#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
+#define CDNS_UART_REGISTER_SPACE 0xFFF
+
+#define cdns_uart_readl(offset) ioread32(port->membase + offset)
+#define cdns_uart_writel(val, offset) iowrite32(val, port->membase + offset)
+
+/* Rx Trigger level */
+static int rx_trigger_level = 56;
+module_param(rx_trigger_level, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
+
+/* Rx Timeout */
+static int rx_timeout = 10;
+module_param(rx_timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
+
+/* Register offsets for the UART. */
+#define CDNS_UART_CR_OFFSET 0x00 /* Control Register */
+#define CDNS_UART_MR_OFFSET 0x04 /* Mode Register */
+#define CDNS_UART_IER_OFFSET 0x08 /* Interrupt Enable */
+#define CDNS_UART_IDR_OFFSET 0x0C /* Interrupt Disable */
+#define CDNS_UART_IMR_OFFSET 0x10 /* Interrupt Mask */
+#define CDNS_UART_ISR_OFFSET 0x14 /* Interrupt Status */
+#define CDNS_UART_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */
+#define CDNS_UART_RXTOUT_OFFSET 0x1C /* RX Timeout */
+#define CDNS_UART_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */
+#define CDNS_UART_MODEMCR_OFFSET 0x24 /* Modem Control */
+#define CDNS_UART_MODEMSR_OFFSET 0x28 /* Modem Status */
+#define CDNS_UART_SR_OFFSET 0x2C /* Channel Status */
+#define CDNS_UART_FIFO_OFFSET 0x30 /* FIFO */
+#define CDNS_UART_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */
+#define CDNS_UART_FLOWDEL_OFFSET 0x38 /* Flow Delay */
+#define CDNS_UART_IRRX_PWIDTH_OFFSET 0x3C /* IR Min Received Pulse Width */
+#define CDNS_UART_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */
+#define CDNS_UART_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */
+
+/* Control Register Bit Definitions */
+#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */
+#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */
+#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */
+#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */
+#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */
+#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */
+#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */
+#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */
+#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
+
+/*
+ * Mode Register:
+ * The mode register (MR) defines the mode of transfer as well as the data
+ * format. If this register is modified during transmission or reception,
+ * data validity cannot be guaranteed.
+ */
+#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
+#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
+#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */
+
+#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
+#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
+
+#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
+#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
+#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
+#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
+#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
+
+#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
+#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
+#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
+
+/*
+ * Interrupt Registers:
+ * Interrupt control logic uses the interrupt enable register (IER) and the
+ * interrupt disable register (IDR) to set the value of the bits in the
+ * interrupt mask register (IMR). The IMR determines whether to pass an
+ * interrupt to the interrupt status register (ISR).
+ * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
+ * interrupt. IMR and ISR are read only, and IER and IDR are write only.
+ * Reading either IER or IDR returns 0x00.
+ * All four registers have the same bit definitions.
+ */
+#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
+#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */
+#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */
+#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
+#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
+#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
+#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
+#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
+#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
+#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
+#define CDNS_UART_IXR_MASK 0x00001FFF /* Valid bit mask */
+
+/* Goes in read_status_mask for break detection as the HW doesn't do it*/
+#define CDNS_UART_IXR_BRK 0x80000000
+
+/*
+ * Channel Status Register:
+ * The channel status register (CSR) is provided to enable the control logic
+ * to monitor the status of bits in the channel interrupt status register,
+ * even if these are masked out by the interrupt mask register.
+ */
+#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
+#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
+#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
+#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */
+
+/* baud dividers min/max values */
+#define CDNS_UART_BDIV_MIN 4
+#define CDNS_UART_BDIV_MAX 255
+#define CDNS_UART_CD_MAX 65535
+
+/**
+ * struct cdns_uart - device data
+ * @port: Pointer to the UART port
+ * @uartclk: Reference clock
+ * @pclk: APB clock
+ * @baud: Current baud rate
+ * @clk_rate_change_nb: Notifier block for clock changes
+ */
+struct cdns_uart {
+ struct uart_port *port;
+ struct clk *uartclk;
+ struct clk *pclk;
+ unsigned int baud;
+ struct notifier_block clk_rate_change_nb;
+};
+#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
+ clk_rate_change_nb);
+
+/**
+ * cdns_uart_isr - Interrupt handler
+ * @irq: Irq number
+ * @dev_id: Id of the port
+ *
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+{
+ struct uart_port *port = (struct uart_port *)dev_id;
+ unsigned long flags;
+ unsigned int isrstatus, numbytes;
+ unsigned int data;
+ char status = TTY_NORMAL;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Read the interrupt status register to determine which
+ * interrupt(s) is/are active.
+ */
+ isrstatus = cdns_uart_readl(CDNS_UART_ISR_OFFSET);
+
+ /*
+ * There is no hardware break detection, so we interpret framing
+ * error with all-zeros data as a break sequence. Most of the time,
+ * there's another non-zero byte at the end of the sequence.
+ */
+ if (isrstatus & CDNS_UART_IXR_FRAMING) {
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY)) {
+ if (!cdns_uart_readl(CDNS_UART_FIFO_OFFSET)) {
+ port->read_status_mask |= CDNS_UART_IXR_BRK;
+ isrstatus &= ~CDNS_UART_IXR_FRAMING;
+ }
+ }
+ cdns_uart_writel(CDNS_UART_IXR_FRAMING, CDNS_UART_ISR_OFFSET);
+ }
+
+ /* drop byte with parity error if IGNPAR specified */
+ if (isrstatus & port->ignore_status_mask & CDNS_UART_IXR_PARITY)
+ isrstatus &= ~(CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT);
+
+ isrstatus &= port->read_status_mask;
+ isrstatus &= ~port->ignore_status_mask;
+
+ if ((isrstatus & CDNS_UART_IXR_TOUT) ||
+ (isrstatus & CDNS_UART_IXR_RXTRIG)) {
+ /* Receive Timeout Interrupt */
+ while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+ data = cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
+
+ /* Non-NULL byte after BREAK is garbage (99%) */
+ if (data && (port->read_status_mask &
+ CDNS_UART_IXR_BRK)) {
+ port->read_status_mask &= ~CDNS_UART_IXR_BRK;
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+#ifdef SUPPORT_SYSRQ
+ /*
+ * uart_handle_sysrq_char() doesn't work if
+ * spinlocked, for some reason
+ */
+ if (port->sysrq) {
+ spin_unlock(&port->lock);
+ if (uart_handle_sysrq_char(port,
+ (unsigned char)data)) {
+ spin_lock(&port->lock);
+ continue;
+ }
+ spin_lock(&port->lock);
+ }
+#endif
+
+ port->icount.rx++;
+
+ if (isrstatus & CDNS_UART_IXR_PARITY) {
+ port->icount.parity++;
+ status = TTY_PARITY;
+ } else if (isrstatus & CDNS_UART_IXR_FRAMING) {
+ port->icount.frame++;
+ status = TTY_FRAME;
+ } else if (isrstatus & CDNS_UART_IXR_OVERRUN) {
+ port->icount.overrun++;
+ }
+
+ uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN,
+ data, status);
+ }
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(&port->state->port);
+ spin_lock(&port->lock);
+ }
+
+ /* Dispatch an appropriate handler */
+ if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {
+ if (uart_circ_empty(&port->state->xmit)) {
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY,
+ CDNS_UART_IDR_OFFSET);
+ } else {
+ numbytes = port->fifosize;
+ /* Break if no more data available in the UART buffer */
+ while (numbytes--) {
+ if (uart_circ_empty(&port->state->xmit))
+ break;
+ /* Get the data from the UART circular buffer
+ * and write it to the cdns_uart's TX_FIFO
+ * register.
+ */
+ cdns_uart_writel(
+ port->state->xmit.buf[port->state->xmit.
+ tail], CDNS_UART_FIFO_OFFSET);
+
+ port->icount.tx++;
+
+ /* Adjust the tail of the UART buffer and wrap
+ * the buffer if it reaches limit.
+ */
+ port->state->xmit.tail =
+ (port->state->xmit.tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ }
+
+ if (uart_circ_chars_pending(
+ &port->state->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ }
+ }
+
+ cdns_uart_writel(isrstatus, CDNS_UART_ISR_OFFSET);
+
+ /* be sure to release the lock and tty before leaving */
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * cdns_uart_calc_baud_divs - Calculate baud rate divisors
+ * @clk: UART module input clock
+ * @baud: Desired baud rate
+ * @rbdiv: BDIV value (return value)
+ * @rcd: CD value (return value)
+ * @div8: Value for clk_sel bit in mod (return value)
+ * Return: baud rate, requested baud when possible, or actual baud when there
+ * was too much error, zero if no valid divisors are found.
+ *
+ * Formula to obtain baud rate is
+ * baud_tx/rx rate = clk/CD * (BDIV + 1)
+ * input_clk = (Uart User Defined Clock or Apb Clock)
+ * depends on UCLKEN in MR Reg
+ * clk = input_clk or input_clk/8;
+ * depends on CLKS in MR reg
+ * CD and BDIV depends on values in
+ * baud rate generate register
+ * baud rate clock divisor register
+ */
+static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
+ unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
+{
+ u32 cd, bdiv;
+ unsigned int calc_baud;
+ unsigned int bestbaud = 0;
+ unsigned int bauderror;
+ unsigned int besterror = ~0;
+
+ if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
+ *div8 = 1;
+ clk /= 8;
+ } else {
+ *div8 = 0;
+ }
+
+ for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
+ cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
+ if (cd < 1 || cd > CDNS_UART_CD_MAX)
+ continue;
+
+ calc_baud = clk / (cd * (bdiv + 1));
+
+ if (baud > calc_baud)
+ bauderror = baud - calc_baud;
+ else
+ bauderror = calc_baud - baud;
+
+ if (besterror > bauderror) {
+ *rbdiv = bdiv;
+ *rcd = cd;
+ bestbaud = calc_baud;
+ besterror = bauderror;
+ }
+ }
+ /* use the values when percent error is acceptable */
+ if (((besterror * 100) / baud) < 3)
+ bestbaud = baud;
+
+ return bestbaud;
+}
+
+/**
+ * cdns_uart_set_baud_rate - Calculate and set the baud rate
+ * @port: Handle to the uart port structure
+ * @baud: Baud rate to set
+ * Return: baud rate, requested baud when possible, or actual baud when there
+ * was too much error, zero if no valid divisors are found.
+ */
+static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
+ unsigned int baud)
+{
+ unsigned int calc_baud;
+ u32 cd = 0, bdiv = 0;
+ u32 mreg;
+ int div8;
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
+ &div8);
+
+ /* Write new divisors to hardware */
+ mreg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
+ if (div8)
+ mreg |= CDNS_UART_MR_CLKSEL;
+ else
+ mreg &= ~CDNS_UART_MR_CLKSEL;
+ cdns_uart_writel(mreg, CDNS_UART_MR_OFFSET);
+ cdns_uart_writel(cd, CDNS_UART_BAUDGEN_OFFSET);
+ cdns_uart_writel(bdiv, CDNS_UART_BAUDDIV_OFFSET);
+ cdns_uart->baud = baud;
+
+ return calc_baud;
+}
+
+#ifdef CONFIG_COMMON_CLK
+/**
+ * cdns_uart_clk_notitifer_cb - Clock notifier callback
+ * @nb: Notifier block
+ * @event: Notify event
+ * @data: Notifier data
+ * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
+ */
+static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ u32 ctrl_reg;
+ struct uart_port *port;
+ int locked = 0;
+ struct clk_notifier_data *ndata = data;
+ unsigned long flags = 0;
+ struct cdns_uart *cdns_uart = to_cdns_uart(nb);
+
+ port = cdns_uart->port;
+ if (port->suspended)
+ return NOTIFY_OK;
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ {
+ u32 bdiv;
+ u32 cd;
+ int div8;
+
+ /*
+ * Find out if current baud-rate can be achieved with new clock
+ * frequency.
+ */
+ if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
+ &bdiv, &cd, &div8)) {
+ dev_warn(port->dev, "clock rate change rejected\n");
+ return NOTIFY_BAD;
+ }
+
+ spin_lock_irqsave(&cdns_uart->port->lock, flags);
+
+ /* Disable the TX and RX to set baud rate */
+ cdns_uart_writel(cdns_uart_readl(CDNS_UART_CR_OFFSET) |
+ (CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS),
+ CDNS_UART_CR_OFFSET);
+
+ spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
+
+ return NOTIFY_OK;
+ }
+ case POST_RATE_CHANGE:
+ /*
+ * Set clk dividers to generate correct baud with new clock
+ * frequency.
+ */
+
+ spin_lock_irqsave(&cdns_uart->port->lock, flags);
+
+ locked = 1;
+ port->uartclk = ndata->new_rate;
+
+ cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
+ cdns_uart->baud);
+ /* fall through */
+ case ABORT_RATE_CHANGE:
+ if (!locked)
+ spin_lock_irqsave(&cdns_uart->port->lock, flags);
+
+ /* Set TX/RX Reset */
+ cdns_uart_writel(cdns_uart_readl(CDNS_UART_CR_OFFSET) |
+ (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST),
+ CDNS_UART_CR_OFFSET);
+
+ while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+ (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+ cpu_relax();
+
+ /*
+ * Clear the RX disable and TX disable bits and then set the TX
+ * enable bit and RX enable bit to enable the transmitter and
+ * receiver.
+ */
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+ ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
+
+ spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
+
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+#endif
+
+/**
+ * cdns_uart_start_tx - Start transmitting bytes
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_start_tx(struct uart_port *port)
+{
+ unsigned int status, numbytes = port->fifosize;
+
+ if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
+ return;
+
+ status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ /* Set the TX enable bit and clear the TX disable bit to enable the
+ * transmitter.
+ */
+ cdns_uart_writel((status & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+ CDNS_UART_CR_OFFSET);
+
+ while (numbytes-- && ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
+ /* Break if no more data available in the UART buffer */
+ if (uart_circ_empty(&port->state->xmit))
+ break;
+
+ /* Get the data from the UART circular buffer and
+ * write it to the cdns_uart's TX_FIFO register.
+ */
+ cdns_uart_writel(
+ port->state->xmit.buf[port->state->xmit.tail],
+ CDNS_UART_FIFO_OFFSET);
+ port->icount.tx++;
+
+ /* Adjust the tail of the UART buffer and wrap
+ * the buffer if it reaches limit.
+ */
+ port->state->xmit.tail = (port->state->xmit.tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ }
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_ISR_OFFSET);
+ /* Enable the TX Empty interrupt */
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_IER_OFFSET);
+
+ if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+/**
+ * cdns_uart_stop_tx - Stop TX
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_stop_tx(struct uart_port *port)
+{
+ unsigned int regval;
+
+ regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ regval |= CDNS_UART_CR_TX_DIS;
+ /* Disable the transmitter */
+ cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
+}
+
+/**
+ * cdns_uart_stop_rx - Stop RX
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_stop_rx(struct uart_port *port)
+{
+ unsigned int regval;
+
+ regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ regval |= CDNS_UART_CR_RX_DIS;
+ /* Disable the receiver */
+ cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
+}
+
+/**
+ * cdns_uart_tx_empty - Check whether TX is empty
+ * @port: Handle to the uart port structure
+ *
+ * Return: TIOCSER_TEMT on success, 0 otherwise
+ */
+static unsigned int cdns_uart_tx_empty(struct uart_port *port)
+{
+ unsigned int status;
+
+ status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY;
+ return status ? TIOCSER_TEMT : 0;
+}
+
+/**
+ * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
+ * transmitting char breaks
+ * @port: Handle to the uart port structure
+ * @ctl: Value based on which start or stop decision is taken
+ */
+static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
+{
+ unsigned int status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+
+ if (ctl == -1)
+ cdns_uart_writel(CDNS_UART_CR_STARTBRK | status,
+ CDNS_UART_CR_OFFSET);
+ else {
+ if ((status & CDNS_UART_CR_STOPBRK) == 0)
+ cdns_uart_writel(CDNS_UART_CR_STOPBRK | status,
+ CDNS_UART_CR_OFFSET);
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/**
+ * cdns_uart_set_termios - termios operations, handling data length, parity,
+ * stop bits, flow control, baud rate
+ * @port: Handle to the uart port structure
+ * @termios: Handle to the input termios structure
+ * @old: Values of the previously saved termios structure
+ */
+static void cdns_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ unsigned int cval = 0;
+ unsigned int baud, minbaud, maxbaud;
+ unsigned long flags;
+ unsigned int ctrl_reg, mode_reg;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Empty the receive FIFO 1st before making changes */
+ while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+ cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
+ }
+
+ /* Disable the TX and RX to set baud rate */
+ cdns_uart_writel(cdns_uart_readl(CDNS_UART_CR_OFFSET) |
+ (CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS),
+ CDNS_UART_CR_OFFSET);
+
+ /*
+ * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
+ * min and max baud should be calculated here based on port->uartclk.
+ * this way we get a valid baud and can safely call set_baud()
+ */
+ minbaud = port->uartclk /
+ ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
+ maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
+ baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
+ baud = cdns_uart_set_baud_rate(port, baud);
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /* Set TX/RX Reset */
+ cdns_uart_writel(cdns_uart_readl(CDNS_UART_CR_OFFSET) |
+ (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST),
+ CDNS_UART_CR_OFFSET);
+
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+
+ /* Clear the RX disable and TX disable bits and then set the TX enable
+ * bit and RX enable bit to enable the transmitter and receiver.
+ */
+ ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+ ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
+
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
+
+ port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
+ CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
+ port->ignore_status_mask = 0;
+
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING;
+
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
+
+ /* ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
+ CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
+
+ mode_reg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
+
+ /* Handling Data Size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS6:
+ cval |= CDNS_UART_MR_CHARLEN_6_BIT;
+ break;
+ case CS7:
+ cval |= CDNS_UART_MR_CHARLEN_7_BIT;
+ break;
+ default:
+ case CS8:
+ cval |= CDNS_UART_MR_CHARLEN_8_BIT;
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ break;
+ }
+
+ /* Handling Parity and Stop Bits length */
+ if (termios->c_cflag & CSTOPB)
+ cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
+ else
+ cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
+
+ if (termios->c_cflag & PARENB) {
+ /* Mark or Space parity */
+ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD)
+ cval |= CDNS_UART_MR_PARITY_MARK;
+ else
+ cval |= CDNS_UART_MR_PARITY_SPACE;
+ } else {
+ if (termios->c_cflag & PARODD)
+ cval |= CDNS_UART_MR_PARITY_ODD;
+ else
+ cval |= CDNS_UART_MR_PARITY_EVEN;
+ }
+ } else {
+ cval |= CDNS_UART_MR_PARITY_NONE;
+ }
+ cval |= mode_reg & 1;
+ cdns_uart_writel(cval, CDNS_UART_MR_OFFSET);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/**
+ * cdns_uart_startup - Called when an application opens a cdns_uart port
+ * @port: Handle to the uart port structure
+ *
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_startup(struct uart_port *port)
+{
+ unsigned int retval = 0, status = 0;
+
+ retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
+ (void *)port);
+ if (retval)
+ return retval;
+
+ /* Disable the TX and RX */
+ cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+ CDNS_UART_CR_OFFSET);
+
+ /* Set the Control Register with TX/RX Enable, TX/RX Reset,
+ * no break chars.
+ */
+ cdns_uart_writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
+ CDNS_UART_CR_OFFSET);
+
+ status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+
+ /* Clear the RX disable and TX disable bits and then set the TX enable
+ * bit and RX enable bit to enable the transmitter and receiver.
+ */
+ cdns_uart_writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
+ | (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
+ CDNS_UART_CR_STOPBRK), CDNS_UART_CR_OFFSET);
+
+ /* Set the Mode Register with normal mode,8 data bits,1 stop bit,
+ * no parity.
+ */
+ cdns_uart_writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
+ | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
+ CDNS_UART_MR_OFFSET);
+
+ /*
+ * Set the RX FIFO Trigger level to use most of the FIFO, but it
+ * can be tuned with a module parameter
+ */
+ cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
+
+ /*
+ * Receive Timeout register is enabled but it
+ * can be tuned with a module parameter
+ */
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
+
+ /* Clear out any pending interrupts before enabling them */
+ cdns_uart_writel(cdns_uart_readl(CDNS_UART_ISR_OFFSET),
+ CDNS_UART_ISR_OFFSET);
+
+ /* Set the Interrupt Registers with desired interrupts */
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN |
+ CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
+ CDNS_UART_IER_OFFSET);
+
+ return retval;
+}
+
+/**
+ * cdns_uart_shutdown - Called when an application closes a cdns_uart port
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_shutdown(struct uart_port *port)
+{
+ int status;
+
+ /* Disable interrupts */
+ status = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(status, CDNS_UART_IDR_OFFSET);
+
+ /* Disable the TX and RX */
+ cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+ CDNS_UART_CR_OFFSET);
+ free_irq(port->irq, port);
+}
+
+/**
+ * cdns_uart_type - Set UART type to cdns_uart port
+ * @port: Handle to the uart port structure
+ *
+ * Return: string on success, NULL otherwise
+ */
+static const char *cdns_uart_type(struct uart_port *port)
+{
+ return port->type == PORT_CDNS_UART ? CDNS_UART_NAME : NULL;
+}
+
+/**
+ * cdns_uart_verify_port - Verify the port params
+ * @port: Handle to the uart port structure
+ * @ser: Handle to the structure whose members are compared
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_CDNS_UART)
+ return -EINVAL;
+ if (port->irq != ser->irq)
+ return -EINVAL;
+ if (ser->io_type != UPIO_MEM)
+ return -EINVAL;
+ if (port->iobase != ser->port)
+ return -EINVAL;
+ if (ser->hub6 != 0)
+ return -EINVAL;
+ return 0;
+}
+
+/**
+ * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
+ * called when the driver adds a cdns_uart port via
+ * uart_add_one_port()
+ * @port: Handle to the uart port structure
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_request_port(struct uart_port *port)
+{
+ if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
+ CDNS_UART_NAME)) {
+ return -ENOMEM;
+ }
+
+ port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
+ if (!port->membase) {
+ dev_err(port->dev, "Unable to map registers\n");
+ release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+/**
+ * cdns_uart_release_port - Release UART port
+ * @port: Handle to the uart port structure
+ *
+ * Release the memory region attached to a cdns_uart port. Called when the
+ * driver removes a cdns_uart port via uart_remove_one_port().
+ */
+static void cdns_uart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
+ iounmap(port->membase);
+ port->membase = NULL;
+}
+
+/**
+ * cdns_uart_config_port - Configure UART port
+ * @port: Handle to the uart port structure
+ * @flags: If any
+ */
+static void cdns_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
+ port->type = PORT_CDNS_UART;
+}
+
+/**
+ * cdns_uart_get_mctrl - Get the modem control state
+ * @port: Handle to the uart port structure
+ *
+ * Return: The modem control state
+ */
+static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* N/A */
+}
+
+static void cdns_uart_enable_ms(struct uart_port *port)
+{
+ /* N/A */
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int cdns_uart_poll_get_char(struct uart_port *port)
+{
+ u32 imr;
+ int c;
+
+ /* Disable all interrupts */
+ imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
+
+ /* Check if FIFO is empty */
+ if (cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_RXEMPTY)
+ c = NO_POLL_CHAR;
+ else /* Read a character */
+ c = (unsigned char) cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
+
+ /* Enable interrupts */
+ cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
+
+ return c;
+}
+
+static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ u32 imr;
+
+ /* Disable all interrupts */
+ imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
+
+ /* Wait until FIFO is empty */
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
+ cpu_relax();
+
+ /* Write a character */
+ cdns_uart_writel(c, CDNS_UART_FIFO_OFFSET);
+
+ /* Wait until FIFO is empty */
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
+ cpu_relax();
+
+ /* Enable interrupts */
+ cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
+
+ return;
+}
+#endif
+
+static struct uart_ops cdns_uart_ops = {
+ .set_mctrl = cdns_uart_set_mctrl,
+ .get_mctrl = cdns_uart_get_mctrl,
+ .enable_ms = cdns_uart_enable_ms,
+ .start_tx = cdns_uart_start_tx,
+ .stop_tx = cdns_uart_stop_tx,
+ .stop_rx = cdns_uart_stop_rx,
+ .tx_empty = cdns_uart_tx_empty,
+ .break_ctl = cdns_uart_break_ctl,
+ .set_termios = cdns_uart_set_termios,
+ .startup = cdns_uart_startup,
+ .shutdown = cdns_uart_shutdown,
+ .type = cdns_uart_type,
+ .verify_port = cdns_uart_verify_port,
+ .request_port = cdns_uart_request_port,
+ .release_port = cdns_uart_release_port,
+ .config_port = cdns_uart_config_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = cdns_uart_poll_get_char,
+ .poll_put_char = cdns_uart_poll_put_char,
+#endif
+};
+
+static struct uart_port cdns_uart_port[2];
+
+/**
+ * cdns_uart_get_port - Configure the port from platform device resource info
+ *
+ * Return: Pointer to a uart_port or NULL for failure
+ */
+static struct uart_port *cdns_uart_get_port(void)
+{
+ struct uart_port *port;
+ int id;
+
+ /* Find the next unused port */
+ for (id = 0; id < CDNS_UART_NR_PORTS; id++)
+ if (cdns_uart_port[id].mapbase == 0)
+ break;
+
+ if (id >= CDNS_UART_NR_PORTS)
+ return NULL;
+
+ port = &cdns_uart_port[id];
+
+ /* At this point, we've got an empty uart_port struct, initialize it */
+ spin_lock_init(&port->lock);
+ port->membase = NULL;
+ port->iobase = 1; /* mark port in use */
+ port->irq = 0;
+ port->type = PORT_UNKNOWN;
+ port->iotype = UPIO_MEM32;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &cdns_uart_ops;
+ port->fifosize = CDNS_UART_FIFO_SIZE;
+ port->line = id;
+ port->dev = NULL;
+ return port;
+}
+
+#ifdef CONFIG_SERIAL_CADENCE_UART_CONSOLE
+/**
+ * cdns_uart_console_wait_tx - Wait for the TX to be full
+ * @port: Handle to the uart port structure
+ */
+static void cdns_uart_console_wait_tx(struct uart_port *port)
+{
+ while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY)
+ != CDNS_UART_SR_TXEMPTY)
+ barrier();
+}
+
+/**
+ * cdns_uart_console_putchar - write the character to the FIFO buffer
+ * @port: Handle to the uart port structure
+ * @ch: Character to be written
+ */
+static void cdns_uart_console_putchar(struct uart_port *port, int ch)
+{
+ cdns_uart_console_wait_tx(port);
+ cdns_uart_writel(ch, CDNS_UART_FIFO_OFFSET);
+}
+
+/**
+ * cdns_uart_console_write - perform write operation
+ * @co: Handle to the console
+ * @s: Pointer to character array
+ * @count: No of characters
+ */
+static void cdns_uart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port = &cdns_uart_port[co->index];
+ unsigned long flags;
+ unsigned int imr, ctrl;
+ int locked = 1;
+
+ if (oops_in_progress)
+ locked = spin_trylock_irqsave(&port->lock, flags);
+ else
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* save and disable interrupt */
+ imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
+
+ /*
+ * Make sure that the tx part is enabled. Set the TX enable bit and
+ * clear the TX disable bit to enable the transmitter.
+ */
+ ctrl = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ cdns_uart_writel((ctrl & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+ CDNS_UART_CR_OFFSET);
+
+ uart_console_write(port, s, count, cdns_uart_console_putchar);
+ cdns_uart_console_wait_tx(port);
+
+ cdns_uart_writel(ctrl, CDNS_UART_CR_OFFSET);
+
+ /* restore interrupt state, it seems like there may be a h/w bug
+ * in that the interrupt enable register should not need to be
+ * written based on the data sheet
+ */
+ cdns_uart_writel(~imr, CDNS_UART_IDR_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
+
+ if (locked)
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/**
+ * cdns_uart_console_setup - Initialize the uart to default config
+ * @co: Console handle
+ * @options: Initial settings of uart
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int __init cdns_uart_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &cdns_uart_port[co->index];
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
+ return -EINVAL;
+
+ if (!port->mapbase) {
+ pr_debug("console on ttyPS%i not present\n", co->index);
+ return -ENODEV;
+ }
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver cdns_uart_uart_driver;
+
+static struct console cdns_uart_console = {
+ .name = CDNS_UART_TTY_NAME,
+ .write = cdns_uart_console_write,
+ .device = uart_console_device,
+ .setup = cdns_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+ .data = &cdns_uart_uart_driver,
+};
+
+/**
+ * cdns_uart_console_init - Initialization call
+ *
+ * Return: 0 on success, negative error otherwise.
+ */
+static int __init cdns_uart_console_init(void)
+{
+ register_console(&cdns_uart_console);
+ return 0;
+}
+
+console_initcall(cdns_uart_console_init);
+
+#endif /* CONFIG_SERIAL_CADENCE_UART_CONSOLE */
+
+static struct uart_driver cdns_uart_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = CDNS_UART_NAME,
+ .dev_name = CDNS_UART_TTY_NAME,
+ .major = CDNS_UART_MAJOR,
+ .minor = CDNS_UART_MINOR,
+ .nr = CDNS_UART_NR_PORTS,
+#ifdef CONFIG_SERIAL_CADENCE_UART_CONSOLE
+ .cons = &cdns_uart_console,
+#endif
+};
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * cdns_uart_suspend - suspend event
+ * @device: Pointer to the device structure
+ *
+ * Return: 0
+ */
+static int cdns_uart_suspend(struct device *device)
+{
+ struct uart_port *port = dev_get_drvdata(device);
+ struct tty_struct *tty;
+ struct device *tty_dev;
+ int may_wake = 0;
+
+ /* Get the tty which could be NULL so don't assume it's valid */
+ tty = tty_port_tty_get(&port->state->port);
+ if (tty) {
+ tty_dev = tty->dev;
+ may_wake = device_may_wakeup(tty_dev);
+ tty_kref_put(tty);
+ }
+
+ /*
+ * Call the API provided in serial_core.c file which handles
+ * the suspend.
+ */
+ uart_suspend_port(&cdns_uart_uart_driver, port);
+ if (console_suspend_enabled && !may_wake) {
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ clk_disable(cdns_uart->uartclk);
+ clk_disable(cdns_uart->pclk);
+ } else {
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ /* Empty the receive FIFO 1st before making changes */
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY))
+ cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
+ /* set RX trigger level to 1 */
+ cdns_uart_writel(1, CDNS_UART_RXWM_OFFSET);
+ /* disable RX timeout interrups */
+ cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IDR_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ return 0;
+}
+
+/**
+ * cdns_uart_resume - Resume after a previous suspend
+ * @device: Pointer to the device structure
+ *
+ * Return: 0
+ */
+static int cdns_uart_resume(struct device *device)
+{
+ struct uart_port *port = dev_get_drvdata(device);
+ unsigned long flags = 0;
+ u32 ctrl_reg;
+ struct tty_struct *tty;
+ struct device *tty_dev;
+ int may_wake = 0;
+
+ /* Get the tty which could be NULL so don't assume it's valid */
+ tty = tty_port_tty_get(&port->state->port);
+ if (tty) {
+ tty_dev = tty->dev;
+ may_wake = device_may_wakeup(tty_dev);
+ tty_kref_put(tty);
+ }
+
+ if (console_suspend_enabled && !may_wake) {
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ clk_enable(cdns_uart->pclk);
+ clk_enable(cdns_uart->uartclk);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Set TX/RX Reset */
+ cdns_uart_writel(cdns_uart_readl(CDNS_UART_CR_OFFSET) |
+ (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST),
+ CDNS_UART_CR_OFFSET);
+ while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+ (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+ cpu_relax();
+
+ /* restore rx timeout value */
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
+ /* Enable Tx/Rx */
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+ ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ } else {
+ spin_lock_irqsave(&port->lock, flags);
+ /* restore original rx trigger level */
+ cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
+ /* enable RX timeout interrupt */
+ cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IER_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ return uart_resume_port(&cdns_uart_uart_driver, port);
+}
+#endif /* ! CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
+ cdns_uart_resume);
+
+/**
+ * cdns_uart_probe - Platform driver probe
+ * @pdev: Pointer to the platform device structure
+ *
+ * Return: 0 on success, negative error otherwise.
+ */
+static int cdns_uart_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct uart_port *port;
+ struct resource *res, *res2;
+ struct cdns_uart *cdns_uart_data;
+
+ cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
+ GFP_KERNEL);
+ if (!cdns_uart_data)
+ return -ENOMEM;
+
+ cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(cdns_uart_data->pclk)) {
+ dev_err(&pdev->dev, "pclk clock not found.\n");
+ return PTR_ERR(cdns_uart_data->pclk);
+ }
+ cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
+ if (IS_ERR(cdns_uart_data->uartclk)) {
+ dev_err(&pdev->dev, "uart_clk clock not found.\n");
+ return PTR_ERR(cdns_uart_data->uartclk);
+ }
+
+ rc = clk_prepare_enable(cdns_uart_data->pclk);
+ if (rc) {
+ dev_err(&pdev->dev, "Unable to enable pclk.\n");
+ return rc;
+ }
+ rc = clk_prepare_enable(cdns_uart_data->uartclk);
+ if (rc) {
+ dev_err(&pdev->dev, "Unable to enable UART clock.\n");
+ goto err_out_clk_dis_pclk;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ rc = -ENODEV;
+ goto err_out_clk_disable;
+ }
+
+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res2) {
+ rc = -ENODEV;
+ goto err_out_clk_disable;
+ }
+
+#ifdef CONFIG_COMMON_CLK
+ cdns_uart_data->clk_rate_change_nb.notifier_call =
+ cdns_uart_clk_notifier_cb;
+ if (clk_notifier_register(cdns_uart_data->uartclk,
+ &cdns_uart_data->clk_rate_change_nb))
+ dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+#endif
+
+ /* Initialize the port structure */
+ port = cdns_uart_get_port();
+
+ if (!port) {
+ dev_err(&pdev->dev, "Cannot get uart_port structure\n");
+ rc = -ENODEV;
+ goto err_out_notif_unreg;
+ } else {
+ /* Register the port.
+ * This function also registers this device with the tty layer
+ * and triggers invocation of the config_port() entry point.
+ */
+ port->mapbase = res->start;
+ port->irq = res2->start;
+ port->dev = &pdev->dev;
+ port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
+ port->private_data = cdns_uart_data;
+ cdns_uart_data->port = port;
+ platform_set_drvdata(pdev, port);
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "uart_add_one_port() failed; err=%i\n", rc);
+ goto err_out_notif_unreg;
+ }
+ return 0;
+ }
+
+err_out_notif_unreg:
+#ifdef CONFIG_COMMON_CLK
+ clk_notifier_unregister(cdns_uart_data->uartclk,
+ &cdns_uart_data->clk_rate_change_nb);
+#endif
+err_out_clk_disable:
+ clk_disable_unprepare(cdns_uart_data->uartclk);
+err_out_clk_dis_pclk:
+ clk_disable_unprepare(cdns_uart_data->pclk);
+
+ return rc;
+}
+
+/**
+ * cdns_uart_remove - called when the platform driver is unregistered
+ * @pdev: Pointer to the platform device structure
+ *
+ * Return: 0 on success, negative error otherwise.
+ */
+static int cdns_uart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct cdns_uart *cdns_uart_data = port->private_data;
+ int rc;
+
+ /* Remove the cdns_uart port from the serial core */
+#ifdef CONFIG_COMMON_CLK
+ clk_notifier_unregister(cdns_uart_data->uartclk,
+ &cdns_uart_data->clk_rate_change_nb);
+#endif
+ rc = uart_remove_one_port(&cdns_uart_uart_driver, port);
+ port->mapbase = 0;
+ clk_disable_unprepare(cdns_uart_data->uartclk);
+ clk_disable_unprepare(cdns_uart_data->pclk);
+ return rc;
+}
+
+/* Match table for of_platform binding */
+static struct of_device_id cdns_uart_of_match[] = {
+ { .compatible = "cdns,uart-r1p8", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
+
+static struct platform_driver cdns_uart_platform_driver = {
+ .probe = cdns_uart_probe,
+ .remove = cdns_uart_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = CDNS_UART_NAME,
+ .of_match_table = cdns_uart_of_match,
+ .pm = &cdns_uart_dev_pm_ops,
+ },
+};
+
+static int __init cdns_uart_init(void)
+{
+ int retval = 0;
+
+ /* Register the cdns_uart driver with the serial core */
+ retval = uart_register_driver(&cdns_uart_uart_driver);
+ if (retval)
+ return retval;
+
+ /* Register the platform driver */
+ retval = platform_driver_register(&cdns_uart_platform_driver);
+ if (retval)
+ uart_unregister_driver(&cdns_uart_uart_driver);
+
+ return retval;
+}
+
+static void __exit cdns_uart_exit(void)
+{
+ /* Unregister the platform driver */
+ platform_driver_unregister(&cdns_uart_platform_driver);
+
+ /* Unregister the cdns_uart driver */
+ uart_unregister_driver(&cdns_uart_uart_driver);
+}
+
+module_init(cdns_uart_init);
+module_exit(cdns_uart_exit);
+
+MODULE_DESCRIPTION("Driver for Cadence UART");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL");
deleted file mode 100644
@@ -1,1454 +0,0 @@
-/*
- * Xilinx PS UART driver
- *
- * 2011 - 2014 (C) Xilinx Inc.
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2 of the License, or (at your option) any
- * later version.
- */
-
-#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/console.h>
-#include <linux/serial_core.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/module.h>
-
-#define XUARTPS_TTY_NAME "ttyPS"
-#define XUARTPS_NAME "xuartps"
-#define XUARTPS_MAJOR 0 /* use dynamic node allocation */
-#define XUARTPS_MINOR 0 /* works best with devtmpfs */
-#define XUARTPS_NR_PORTS 2
-#define XUARTPS_FIFO_SIZE 64 /* FIFO size */
-#define XUARTPS_REGISTER_SPACE 0xFFF
-
-#define xuartps_readl(offset) ioread32(port->membase + offset)
-#define xuartps_writel(val, offset) iowrite32(val, port->membase + offset)
-
-/* Rx Trigger level */
-static int rx_trigger_level = 56;
-module_param(rx_trigger_level, uint, S_IRUGO);
-MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
-
-/* Rx Timeout */
-static int rx_timeout = 10;
-module_param(rx_timeout, uint, S_IRUGO);
-MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
-
-/* Register offsets for the UART. */
-#define XUARTPS_CR_OFFSET 0x00 /* Control Register */
-#define XUARTPS_MR_OFFSET 0x04 /* Mode Register */
-#define XUARTPS_IER_OFFSET 0x08 /* Interrupt Enable */
-#define XUARTPS_IDR_OFFSET 0x0C /* Interrupt Disable */
-#define XUARTPS_IMR_OFFSET 0x10 /* Interrupt Mask */
-#define XUARTPS_ISR_OFFSET 0x14 /* Interrupt Status */
-#define XUARTPS_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */
-#define XUARTPS_RXTOUT_OFFSET 0x1C /* RX Timeout */
-#define XUARTPS_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */
-#define XUARTPS_MODEMCR_OFFSET 0x24 /* Modem Control */
-#define XUARTPS_MODEMSR_OFFSET 0x28 /* Modem Status */
-#define XUARTPS_SR_OFFSET 0x2C /* Channel Status */
-#define XUARTPS_FIFO_OFFSET 0x30 /* FIFO */
-#define XUARTPS_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */
-#define XUARTPS_FLOWDEL_OFFSET 0x38 /* Flow Delay */
-#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse Width */
-#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */
-#define XUARTPS_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */
-
-/* Control Register Bit Definitions */
-#define XUARTPS_CR_STOPBRK 0x00000100 /* Stop TX break */
-#define XUARTPS_CR_STARTBRK 0x00000080 /* Set TX break */
-#define XUARTPS_CR_TX_DIS 0x00000020 /* TX disabled. */
-#define XUARTPS_CR_TX_EN 0x00000010 /* TX enabled */
-#define XUARTPS_CR_RX_DIS 0x00000008 /* RX disabled. */
-#define XUARTPS_CR_RX_EN 0x00000004 /* RX enabled */
-#define XUARTPS_CR_TXRST 0x00000002 /* TX logic reset */
-#define XUARTPS_CR_RXRST 0x00000001 /* RX logic reset */
-#define XUARTPS_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
-
-/*
- * Mode Register:
- * The mode register (MR) defines the mode of transfer as well as the data
- * format. If this register is modified during transmission or reception,
- * data validity cannot be guaranteed.
- */
-#define XUARTPS_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
-#define XUARTPS_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
-#define XUARTPS_MR_CHMODE_NORM 0x00000000 /* Normal mode */
-
-#define XUARTPS_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
-#define XUARTPS_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
-
-#define XUARTPS_MR_PARITY_NONE 0x00000020 /* No parity mode */
-#define XUARTPS_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
-#define XUARTPS_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
-#define XUARTPS_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
-#define XUARTPS_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
-
-#define XUARTPS_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
-#define XUARTPS_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
-#define XUARTPS_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
-
-/*
- * Interrupt Registers:
- * Interrupt control logic uses the interrupt enable register (IER) and the
- * interrupt disable register (IDR) to set the value of the bits in the
- * interrupt mask register (IMR). The IMR determines whether to pass an
- * interrupt to the interrupt status register (ISR).
- * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
- * interrupt. IMR and ISR are read only, and IER and IDR are write only.
- * Reading either IER or IDR returns 0x00.
- * All four registers have the same bit definitions.
- */
-#define XUARTPS_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
-#define XUARTPS_IXR_PARITY 0x00000080 /* Parity error interrupt */
-#define XUARTPS_IXR_FRAMING 0x00000040 /* Framing error interrupt */
-#define XUARTPS_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
-#define XUARTPS_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
-#define XUARTPS_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
-#define XUARTPS_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
-#define XUARTPS_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
-#define XUARTPS_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
-#define XUARTPS_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
-#define XUARTPS_IXR_MASK 0x00001FFF /* Valid bit mask */
-
-/* Goes in read_status_mask for break detection as the HW doesn't do it*/
-#define XUARTPS_IXR_BRK 0x80000000
-
-/*
- * Channel Status Register:
- * The channel status register (CSR) is provided to enable the control logic
- * to monitor the status of bits in the channel interrupt status register,
- * even if these are masked out by the interrupt mask register.
- */
-#define XUARTPS_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
-#define XUARTPS_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
-#define XUARTPS_SR_TXFULL 0x00000010 /* TX FIFO full */
-#define XUARTPS_SR_RXTRIG 0x00000001 /* Rx Trigger */
-
-/* baud dividers min/max values */
-#define XUARTPS_BDIV_MIN 4
-#define XUARTPS_BDIV_MAX 255
-#define XUARTPS_CD_MAX 65535
-
-/**
- * struct xuartps - device data
- * @port: Pointer to the UART port
- * @refclk: Reference clock
- * @aperclk: APB clock
- * @baud: Current baud rate
- * @clk_rate_change_nb: Notifier block for clock changes
- */
-struct xuartps {
- struct uart_port *port;
- struct clk *refclk;
- struct clk *aperclk;
- unsigned int baud;
- struct notifier_block clk_rate_change_nb;
-};
-#define to_xuartps(_nb) container_of(_nb, struct xuartps, clk_rate_change_nb);
-
-/**
- * xuartps_isr - Interrupt handler
- * @irq: Irq number
- * @dev_id: Id of the port
- *
- * Return: IRQHANDLED
- */
-static irqreturn_t xuartps_isr(int irq, void *dev_id)
-{
- struct uart_port *port = (struct uart_port *)dev_id;
- unsigned long flags;
- unsigned int isrstatus, numbytes;
- unsigned int data;
- char status = TTY_NORMAL;
-
- spin_lock_irqsave(&port->lock, flags);
-
- /* Read the interrupt status register to determine which
- * interrupt(s) is/are active.
- */
- isrstatus = xuartps_readl(XUARTPS_ISR_OFFSET);
-
- /*
- * There is no hardware break detection, so we interpret framing
- * error with all-zeros data as a break sequence. Most of the time,
- * there's another non-zero byte at the end of the sequence.
- */
- if (isrstatus & XUARTPS_IXR_FRAMING) {
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) &
- XUARTPS_SR_RXEMPTY)) {
- if (!xuartps_readl(XUARTPS_FIFO_OFFSET)) {
- port->read_status_mask |= XUARTPS_IXR_BRK;
- isrstatus &= ~XUARTPS_IXR_FRAMING;
- }
- }
- xuartps_writel(XUARTPS_IXR_FRAMING, XUARTPS_ISR_OFFSET);
- }
-
- /* drop byte with parity error if IGNPAR specified */
- if (isrstatus & port->ignore_status_mask & XUARTPS_IXR_PARITY)
- isrstatus &= ~(XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT);
-
- isrstatus &= port->read_status_mask;
- isrstatus &= ~port->ignore_status_mask;
-
- if ((isrstatus & XUARTPS_IXR_TOUT) ||
- (isrstatus & XUARTPS_IXR_RXTRIG)) {
- /* Receive Timeout Interrupt */
- while ((xuartps_readl(XUARTPS_SR_OFFSET) &
- XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
- data = xuartps_readl(XUARTPS_FIFO_OFFSET);
-
- /* Non-NULL byte after BREAK is garbage (99%) */
- if (data && (port->read_status_mask &
- XUARTPS_IXR_BRK)) {
- port->read_status_mask &= ~XUARTPS_IXR_BRK;
- port->icount.brk++;
- if (uart_handle_break(port))
- continue;
- }
-
-#ifdef SUPPORT_SYSRQ
- /*
- * uart_handle_sysrq_char() doesn't work if
- * spinlocked, for some reason
- */
- if (port->sysrq) {
- spin_unlock(&port->lock);
- if (uart_handle_sysrq_char(port,
- (unsigned char)data)) {
- spin_lock(&port->lock);
- continue;
- }
- spin_lock(&port->lock);
- }
-#endif
-
- port->icount.rx++;
-
- if (isrstatus & XUARTPS_IXR_PARITY) {
- port->icount.parity++;
- status = TTY_PARITY;
- } else if (isrstatus & XUARTPS_IXR_FRAMING) {
- port->icount.frame++;
- status = TTY_FRAME;
- } else if (isrstatus & XUARTPS_IXR_OVERRUN) {
- port->icount.overrun++;
- }
-
- uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN,
- data, status);
- }
- spin_unlock(&port->lock);
- tty_flip_buffer_push(&port->state->port);
- spin_lock(&port->lock);
- }
-
- /* Dispatch an appropriate handler */
- if ((isrstatus & XUARTPS_IXR_TXEMPTY) == XUARTPS_IXR_TXEMPTY) {
- if (uart_circ_empty(&port->state->xmit)) {
- xuartps_writel(XUARTPS_IXR_TXEMPTY,
- XUARTPS_IDR_OFFSET);
- } else {
- numbytes = port->fifosize;
- /* Break if no more data available in the UART buffer */
- while (numbytes--) {
- if (uart_circ_empty(&port->state->xmit))
- break;
- /* Get the data from the UART circular buffer
- * and write it to the xuartps's TX_FIFO
- * register.
- */
- xuartps_writel(
- port->state->xmit.buf[port->state->xmit.
- tail], XUARTPS_FIFO_OFFSET);
-
- port->icount.tx++;
-
- /* Adjust the tail of the UART buffer and wrap
- * the buffer if it reaches limit.
- */
- port->state->xmit.tail =
- (port->state->xmit.tail + 1) &
- (UART_XMIT_SIZE - 1);
- }
-
- if (uart_circ_chars_pending(
- &port->state->xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- }
- }
-
- xuartps_writel(isrstatus, XUARTPS_ISR_OFFSET);
-
- /* be sure to release the lock and tty before leaving */
- spin_unlock_irqrestore(&port->lock, flags);
-
- return IRQ_HANDLED;
-}
-
-/**
- * xuartps_calc_baud_divs - Calculate baud rate divisors
- * @clk: UART module input clock
- * @baud: Desired baud rate
- * @rbdiv: BDIV value (return value)
- * @rcd: CD value (return value)
- * @div8: Value for clk_sel bit in mod (return value)
- * Return: baud rate, requested baud when possible, or actual baud when there
- * was too much error, zero if no valid divisors are found.
- *
- * Formula to obtain baud rate is
- * baud_tx/rx rate = clk/CD * (BDIV + 1)
- * input_clk = (Uart User Defined Clock or Apb Clock)
- * depends on UCLKEN in MR Reg
- * clk = input_clk or input_clk/8;
- * depends on CLKS in MR reg
- * CD and BDIV depends on values in
- * baud rate generate register
- * baud rate clock divisor register
- */
-static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
- u32 *rbdiv, u32 *rcd, int *div8)
-{
- u32 cd, bdiv;
- unsigned int calc_baud;
- unsigned int bestbaud = 0;
- unsigned int bauderror;
- unsigned int besterror = ~0;
-
- if (baud < clk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX)) {
- *div8 = 1;
- clk /= 8;
- } else {
- *div8 = 0;
- }
-
- for (bdiv = XUARTPS_BDIV_MIN; bdiv <= XUARTPS_BDIV_MAX; bdiv++) {
- cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
- if (cd < 1 || cd > XUARTPS_CD_MAX)
- continue;
-
- calc_baud = clk / (cd * (bdiv + 1));
-
- if (baud > calc_baud)
- bauderror = baud - calc_baud;
- else
- bauderror = calc_baud - baud;
-
- if (besterror > bauderror) {
- *rbdiv = bdiv;
- *rcd = cd;
- bestbaud = calc_baud;
- besterror = bauderror;
- }
- }
- /* use the values when percent error is acceptable */
- if (((besterror * 100) / baud) < 3)
- bestbaud = baud;
-
- return bestbaud;
-}
-
-/**
- * xuartps_set_baud_rate - Calculate and set the baud rate
- * @port: Handle to the uart port structure
- * @baud: Baud rate to set
- * Return: baud rate, requested baud when possible, or actual baud when there
- * was too much error, zero if no valid divisors are found.
- */
-static unsigned int xuartps_set_baud_rate(struct uart_port *port,
- unsigned int baud)
-{
- unsigned int calc_baud;
- u32 cd = 0, bdiv = 0;
- u32 mreg;
- int div8;
- struct xuartps *xuartps = port->private_data;
-
- calc_baud = xuartps_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
- &div8);
-
- /* Write new divisors to hardware */
- mreg = xuartps_readl(XUARTPS_MR_OFFSET);
- if (div8)
- mreg |= XUARTPS_MR_CLKSEL;
- else
- mreg &= ~XUARTPS_MR_CLKSEL;
- xuartps_writel(mreg, XUARTPS_MR_OFFSET);
- xuartps_writel(cd, XUARTPS_BAUDGEN_OFFSET);
- xuartps_writel(bdiv, XUARTPS_BAUDDIV_OFFSET);
- xuartps->baud = baud;
-
- return calc_baud;
-}
-
-#ifdef CONFIG_COMMON_CLK
-/**
- * xuartps_clk_notitifer_cb - Clock notifier callback
- * @nb: Notifier block
- * @event: Notify event
- * @data: Notifier data
- * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
- */
-static int xuartps_clk_notifier_cb(struct notifier_block *nb,
- unsigned long event, void *data)
-{
- u32 ctrl_reg;
- struct uart_port *port;
- int locked = 0;
- struct clk_notifier_data *ndata = data;
- unsigned long flags = 0;
- struct xuartps *xuartps = to_xuartps(nb);
-
- port = xuartps->port;
- if (port->suspended)
- return NOTIFY_OK;
-
- switch (event) {
- case PRE_RATE_CHANGE:
- {
- u32 bdiv;
- u32 cd;
- int div8;
-
- /*
- * Find out if current baud-rate can be achieved with new clock
- * frequency.
- */
- if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
- &bdiv, &cd, &div8)) {
- dev_warn(port->dev, "clock rate change rejected\n");
- return NOTIFY_BAD;
- }
-
- spin_lock_irqsave(&xuartps->port->lock, flags);
-
- /* Disable the TX and RX to set baud rate */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
- XUARTPS_CR_OFFSET);
-
- spin_unlock_irqrestore(&xuartps->port->lock, flags);
-
- return NOTIFY_OK;
- }
- case POST_RATE_CHANGE:
- /*
- * Set clk dividers to generate correct baud with new clock
- * frequency.
- */
-
- spin_lock_irqsave(&xuartps->port->lock, flags);
-
- locked = 1;
- port->uartclk = ndata->new_rate;
-
- xuartps->baud = xuartps_set_baud_rate(xuartps->port,
- xuartps->baud);
- /* fall through */
- case ABORT_RATE_CHANGE:
- if (!locked)
- spin_lock_irqsave(&xuartps->port->lock, flags);
-
- /* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
-
- while (xuartps_readl(XUARTPS_CR_OFFSET) &
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
- cpu_relax();
-
- /*
- * Clear the RX disable and TX disable bits and then set the TX
- * enable bit and RX enable bit to enable the transmitter and
- * receiver.
- */
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
- ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
- (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
-
- spin_unlock_irqrestore(&xuartps->port->lock, flags);
-
- return NOTIFY_OK;
- default:
- return NOTIFY_DONE;
- }
-}
-#endif
-
-/**
- * xuartps_start_tx - Start transmitting bytes
- * @port: Handle to the uart port structure
- */
-static void xuartps_start_tx(struct uart_port *port)
-{
- unsigned int status, numbytes = port->fifosize;
-
- if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
- return;
-
- status = xuartps_readl(XUARTPS_CR_OFFSET);
- /* Set the TX enable bit and clear the TX disable bit to enable the
- * transmitter.
- */
- xuartps_writel((status & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
- XUARTPS_CR_OFFSET);
-
- while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET) &
- XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) {
- /* Break if no more data available in the UART buffer */
- if (uart_circ_empty(&port->state->xmit))
- break;
-
- /* Get the data from the UART circular buffer and
- * write it to the xuartps's TX_FIFO register.
- */
- xuartps_writel(
- port->state->xmit.buf[port->state->xmit.tail],
- XUARTPS_FIFO_OFFSET);
- port->icount.tx++;
-
- /* Adjust the tail of the UART buffer and wrap
- * the buffer if it reaches limit.
- */
- port->state->xmit.tail = (port->state->xmit.tail + 1) &
- (UART_XMIT_SIZE - 1);
- }
- xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET);
- /* Enable the TX Empty interrupt */
- xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET);
-
- if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-}
-
-/**
- * xuartps_stop_tx - Stop TX
- * @port: Handle to the uart port structure
- */
-static void xuartps_stop_tx(struct uart_port *port)
-{
- unsigned int regval;
-
- regval = xuartps_readl(XUARTPS_CR_OFFSET);
- regval |= XUARTPS_CR_TX_DIS;
- /* Disable the transmitter */
- xuartps_writel(regval, XUARTPS_CR_OFFSET);
-}
-
-/**
- * xuartps_stop_rx - Stop RX
- * @port: Handle to the uart port structure
- */
-static void xuartps_stop_rx(struct uart_port *port)
-{
- unsigned int regval;
-
- regval = xuartps_readl(XUARTPS_CR_OFFSET);
- regval |= XUARTPS_CR_RX_DIS;
- /* Disable the receiver */
- xuartps_writel(regval, XUARTPS_CR_OFFSET);
-}
-
-/**
- * xuartps_tx_empty - Check whether TX is empty
- * @port: Handle to the uart port structure
- *
- * Return: TIOCSER_TEMT on success, 0 otherwise
- */
-static unsigned int xuartps_tx_empty(struct uart_port *port)
-{
- unsigned int status;
-
- status = xuartps_readl(XUARTPS_ISR_OFFSET) & XUARTPS_IXR_TXEMPTY;
- return status ? TIOCSER_TEMT : 0;
-}
-
-/**
- * xuartps_break_ctl - Based on the input ctl we have to start or stop
- * transmitting char breaks
- * @port: Handle to the uart port structure
- * @ctl: Value based on which start or stop decision is taken
- */
-static void xuartps_break_ctl(struct uart_port *port, int ctl)
-{
- unsigned int status;
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
-
- status = xuartps_readl(XUARTPS_CR_OFFSET);
-
- if (ctl == -1)
- xuartps_writel(XUARTPS_CR_STARTBRK | status,
- XUARTPS_CR_OFFSET);
- else {
- if ((status & XUARTPS_CR_STOPBRK) == 0)
- xuartps_writel(XUARTPS_CR_STOPBRK | status,
- XUARTPS_CR_OFFSET);
- }
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/**
- * xuartps_set_termios - termios operations, handling data length, parity,
- * stop bits, flow control, baud rate
- * @port: Handle to the uart port structure
- * @termios: Handle to the input termios structure
- * @old: Values of the previously saved termios structure
- */
-static void xuartps_set_termios(struct uart_port *port,
- struct ktermios *termios, struct ktermios *old)
-{
- unsigned int cval = 0;
- unsigned int baud, minbaud, maxbaud;
- unsigned long flags;
- unsigned int ctrl_reg, mode_reg;
-
- spin_lock_irqsave(&port->lock, flags);
-
- /* Empty the receive FIFO 1st before making changes */
- while ((xuartps_readl(XUARTPS_SR_OFFSET) &
- XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
- xuartps_readl(XUARTPS_FIFO_OFFSET);
- }
-
- /* Disable the TX and RX to set baud rate */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
- XUARTPS_CR_OFFSET);
-
- /*
- * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
- * min and max baud should be calculated here based on port->uartclk.
- * this way we get a valid baud and can safely call set_baud()
- */
- minbaud = port->uartclk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX * 8);
- maxbaud = port->uartclk / (XUARTPS_BDIV_MIN + 1);
- baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
- baud = xuartps_set_baud_rate(port, baud);
- if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
-
- /* Update the per-port timeout. */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- /* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
-
- ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-
- /* Clear the RX disable and TX disable bits and then set the TX enable
- * bit and RX enable bit to enable the transmitter and receiver.
- */
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
- | (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
-
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
-
- port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG |
- XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT;
- port->ignore_status_mask = 0;
-
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING;
-
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
-
- /* ignore all characters if CREAD is not set */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= XUARTPS_IXR_RXTRIG |
- XUARTPS_IXR_TOUT | XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
-
- mode_reg = xuartps_readl(XUARTPS_MR_OFFSET);
-
- /* Handling Data Size */
- switch (termios->c_cflag & CSIZE) {
- case CS6:
- cval |= XUARTPS_MR_CHARLEN_6_BIT;
- break;
- case CS7:
- cval |= XUARTPS_MR_CHARLEN_7_BIT;
- break;
- default:
- case CS8:
- cval |= XUARTPS_MR_CHARLEN_8_BIT;
- termios->c_cflag &= ~CSIZE;
- termios->c_cflag |= CS8;
- break;
- }
-
- /* Handling Parity and Stop Bits length */
- if (termios->c_cflag & CSTOPB)
- cval |= XUARTPS_MR_STOPMODE_2_BIT; /* 2 STOP bits */
- else
- cval |= XUARTPS_MR_STOPMODE_1_BIT; /* 1 STOP bit */
-
- if (termios->c_cflag & PARENB) {
- /* Mark or Space parity */
- if (termios->c_cflag & CMSPAR) {
- if (termios->c_cflag & PARODD)
- cval |= XUARTPS_MR_PARITY_MARK;
- else
- cval |= XUARTPS_MR_PARITY_SPACE;
- } else {
- if (termios->c_cflag & PARODD)
- cval |= XUARTPS_MR_PARITY_ODD;
- else
- cval |= XUARTPS_MR_PARITY_EVEN;
- }
- } else {
- cval |= XUARTPS_MR_PARITY_NONE;
- }
- cval |= mode_reg & 1;
- xuartps_writel(cval, XUARTPS_MR_OFFSET);
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/**
- * xuartps_startup - Called when an application opens a xuartps port
- * @port: Handle to the uart port structure
- *
- * Return: 0 on success, negative errno otherwise
- */
-static int xuartps_startup(struct uart_port *port)
-{
- unsigned int retval = 0, status = 0;
-
- retval = request_irq(port->irq, xuartps_isr, 0, XUARTPS_NAME,
- (void *)port);
- if (retval)
- return retval;
-
- /* Disable the TX and RX */
- xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
- XUARTPS_CR_OFFSET);
-
- /* Set the Control Register with TX/RX Enable, TX/RX Reset,
- * no break chars.
- */
- xuartps_writel(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST,
- XUARTPS_CR_OFFSET);
-
- status = xuartps_readl(XUARTPS_CR_OFFSET);
-
- /* Clear the RX disable and TX disable bits and then set the TX enable
- * bit and RX enable bit to enable the transmitter and receiver.
- */
- xuartps_writel((status & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
- | (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN |
- XUARTPS_CR_STOPBRK), XUARTPS_CR_OFFSET);
-
- /* Set the Mode Register with normal mode,8 data bits,1 stop bit,
- * no parity.
- */
- xuartps_writel(XUARTPS_MR_CHMODE_NORM | XUARTPS_MR_STOPMODE_1_BIT
- | XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT,
- XUARTPS_MR_OFFSET);
-
- /*
- * Set the RX FIFO Trigger level to use most of the FIFO, but it
- * can be tuned with a module parameter
- */
- xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
-
- /*
- * Receive Timeout register is enabled but it
- * can be tuned with a module parameter
- */
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
-
- /* Clear out any pending interrupts before enabling them */
- xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
-
- /* Set the Interrupt Registers with desired interrupts */
- xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN |
- XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
-
- return retval;
-}
-
-/**
- * xuartps_shutdown - Called when an application closes a xuartps port
- * @port: Handle to the uart port structure
- */
-static void xuartps_shutdown(struct uart_port *port)
-{
- int status;
-
- /* Disable interrupts */
- status = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(status, XUARTPS_IDR_OFFSET);
-
- /* Disable the TX and RX */
- xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
- XUARTPS_CR_OFFSET);
- free_irq(port->irq, port);
-}
-
-/**
- * xuartps_type - Set UART type to xuartps port
- * @port: Handle to the uart port structure
- *
- * Return: string on success, NULL otherwise
- */
-static const char *xuartps_type(struct uart_port *port)
-{
- return port->type == PORT_XUARTPS ? XUARTPS_NAME : NULL;
-}
-
-/**
- * xuartps_verify_port - Verify the port params
- * @port: Handle to the uart port structure
- * @ser: Handle to the structure whose members are compared
- *
- * Return: 0 on success, negative errno otherwise.
- */
-static int xuartps_verify_port(struct uart_port *port,
- struct serial_struct *ser)
-{
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
- return -EINVAL;
- if (port->irq != ser->irq)
- return -EINVAL;
- if (ser->io_type != UPIO_MEM)
- return -EINVAL;
- if (port->iobase != ser->port)
- return -EINVAL;
- if (ser->hub6 != 0)
- return -EINVAL;
- return 0;
-}
-
-/**
- * xuartps_request_port - Claim the memory region attached to xuartps port,
- * called when the driver adds a xuartps port via
- * uart_add_one_port()
- * @port: Handle to the uart port structure
- *
- * Return: 0 on success, negative errno otherwise.
- */
-static int xuartps_request_port(struct uart_port *port)
-{
- if (!request_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE,
- XUARTPS_NAME)) {
- return -ENOMEM;
- }
-
- port->membase = ioremap(port->mapbase, XUARTPS_REGISTER_SPACE);
- if (!port->membase) {
- dev_err(port->dev, "Unable to map registers\n");
- release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
- return -ENOMEM;
- }
- return 0;
-}
-
-/**
- * xuartps_release_port - Release UART port
- * @port: Handle to the uart port structure
- *
- * Release the memory region attached to a xuartps port. Called when the
- * driver removes a xuartps port via uart_remove_one_port().
- */
-static void xuartps_release_port(struct uart_port *port)
-{
- release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
- iounmap(port->membase);
- port->membase = NULL;
-}
-
-/**
- * xuartps_config_port - Configure UART port
- * @port: Handle to the uart port structure
- * @flags: If any
- */
-static void xuartps_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE && xuartps_request_port(port) == 0)
- port->type = PORT_XUARTPS;
-}
-
-/**
- * xuartps_get_mctrl - Get the modem control state
- * @port: Handle to the uart port structure
- *
- * Return: The modem control state
- */
-static unsigned int xuartps_get_mctrl(struct uart_port *port)
-{
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-}
-
-static void xuartps_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- /* N/A */
-}
-
-static void xuartps_enable_ms(struct uart_port *port)
-{
- /* N/A */
-}
-
-#ifdef CONFIG_CONSOLE_POLL
-static int xuartps_poll_get_char(struct uart_port *port)
-{
- u32 imr;
- int c;
-
- /* Disable all interrupts */
- imr = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(imr, XUARTPS_IDR_OFFSET);
-
- /* Check if FIFO is empty */
- if (xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)
- c = NO_POLL_CHAR;
- else /* Read a character */
- c = (unsigned char) xuartps_readl(XUARTPS_FIFO_OFFSET);
-
- /* Enable interrupts */
- xuartps_writel(imr, XUARTPS_IER_OFFSET);
-
- return c;
-}
-
-static void xuartps_poll_put_char(struct uart_port *port, unsigned char c)
-{
- u32 imr;
-
- /* Disable all interrupts */
- imr = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(imr, XUARTPS_IDR_OFFSET);
-
- /* Wait until FIFO is empty */
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
- cpu_relax();
-
- /* Write a character */
- xuartps_writel(c, XUARTPS_FIFO_OFFSET);
-
- /* Wait until FIFO is empty */
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
- cpu_relax();
-
- /* Enable interrupts */
- xuartps_writel(imr, XUARTPS_IER_OFFSET);
-
- return;
-}
-#endif
-
-static struct uart_ops xuartps_ops = {
- .set_mctrl = xuartps_set_mctrl,
- .get_mctrl = xuartps_get_mctrl,
- .enable_ms = xuartps_enable_ms,
- .start_tx = xuartps_start_tx,
- .stop_tx = xuartps_stop_tx,
- .stop_rx = xuartps_stop_rx,
- .tx_empty = xuartps_tx_empty,
- .break_ctl = xuartps_break_ctl,
- .set_termios = xuartps_set_termios,
- .startup = xuartps_startup,
- .shutdown = xuartps_shutdown,
- .type = xuartps_type,
- .verify_port = xuartps_verify_port,
- .request_port = xuartps_request_port,
- .release_port = xuartps_release_port,
- .config_port = xuartps_config_port,
-#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = xuartps_poll_get_char,
- .poll_put_char = xuartps_poll_put_char,
-#endif
-};
-
-static struct uart_port xuartps_port[2];
-
-/**
- * xuartps_get_port - Configure the port from the platform device resource info
- *
- * Return: Pointer to a uart_port or NULL for failure
- */
-static struct uart_port *xuartps_get_port(void)
-{
- struct uart_port *port;
- int id;
-
- /* Find the next unused port */
- for (id = 0; id < XUARTPS_NR_PORTS; id++)
- if (xuartps_port[id].mapbase == 0)
- break;
-
- if (id >= XUARTPS_NR_PORTS)
- return NULL;
-
- port = &xuartps_port[id];
-
- /* At this point, we've got an empty uart_port struct, initialize it */
- spin_lock_init(&port->lock);
- port->membase = NULL;
- port->iobase = 1; /* mark port in use */
- port->irq = 0;
- port->type = PORT_UNKNOWN;
- port->iotype = UPIO_MEM32;
- port->flags = UPF_BOOT_AUTOCONF;
- port->ops = &xuartps_ops;
- port->fifosize = XUARTPS_FIFO_SIZE;
- port->line = id;
- port->dev = NULL;
- return port;
-}
-
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
-/**
- * xuartps_console_wait_tx - Wait for the TX to be full
- * @port: Handle to the uart port structure
- */
-static void xuartps_console_wait_tx(struct uart_port *port)
-{
- while ((xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY)
- != XUARTPS_SR_TXEMPTY)
- barrier();
-}
-
-/**
- * xuartps_console_putchar - write the character to the FIFO buffer
- * @port: Handle to the uart port structure
- * @ch: Character to be written
- */
-static void xuartps_console_putchar(struct uart_port *port, int ch)
-{
- xuartps_console_wait_tx(port);
- xuartps_writel(ch, XUARTPS_FIFO_OFFSET);
-}
-
-/**
- * xuartps_console_write - perform write operation
- * @co: Handle to the console
- * @s: Pointer to character array
- * @count: No of characters
- */
-static void xuartps_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- struct uart_port *port = &xuartps_port[co->index];
- unsigned long flags;
- unsigned int imr, ctrl;
- int locked = 1;
-
- if (oops_in_progress)
- locked = spin_trylock_irqsave(&port->lock, flags);
- else
- spin_lock_irqsave(&port->lock, flags);
-
- /* save and disable interrupt */
- imr = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(imr, XUARTPS_IDR_OFFSET);
-
- /*
- * Make sure that the tx part is enabled. Set the TX enable bit and
- * clear the TX disable bit to enable the transmitter.
- */
- ctrl = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
- XUARTPS_CR_OFFSET);
-
- uart_console_write(port, s, count, xuartps_console_putchar);
- xuartps_console_wait_tx(port);
-
- xuartps_writel(ctrl, XUARTPS_CR_OFFSET);
-
- /* restore interrupt state, it seems like there may be a h/w bug
- * in that the interrupt enable register should not need to be
- * written based on the data sheet
- */
- xuartps_writel(~imr, XUARTPS_IDR_OFFSET);
- xuartps_writel(imr, XUARTPS_IER_OFFSET);
-
- if (locked)
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/**
- * xuartps_console_setup - Initialize the uart to default config
- * @co: Console handle
- * @options: Initial settings of uart
- *
- * Return: 0 on success, negative errno otherwise.
- */
-static int __init xuartps_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &xuartps_port[co->index];
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index < 0 || co->index >= XUARTPS_NR_PORTS)
- return -EINVAL;
-
- if (!port->mapbase) {
- pr_debug("console on ttyPS%i not present\n", co->index);
- return -ENODEV;
- }
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver xuartps_uart_driver;
-
-static struct console xuartps_console = {
- .name = XUARTPS_TTY_NAME,
- .write = xuartps_console_write,
- .device = uart_console_device,
- .setup = xuartps_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
- .data = &xuartps_uart_driver,
-};
-
-/**
- * xuartps_console_init - Initialization call
- *
- * Return: 0 on success, negative error otherwise.
- */
-static int __init xuartps_console_init(void)
-{
- register_console(&xuartps_console);
- return 0;
-}
-
-console_initcall(xuartps_console_init);
-
-#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
-
-static struct uart_driver xuartps_uart_driver = {
- .owner = THIS_MODULE,
- .driver_name = XUARTPS_NAME,
- .dev_name = XUARTPS_TTY_NAME,
- .major = XUARTPS_MAJOR,
- .minor = XUARTPS_MINOR,
- .nr = XUARTPS_NR_PORTS,
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- .cons = &xuartps_console,
-#endif
-};
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * xuartps_suspend - suspend event
- * @device: Pointer to the device structure
- *
- * Return: 0
- */
-static int xuartps_suspend(struct device *device)
-{
- struct uart_port *port = dev_get_drvdata(device);
- struct tty_struct *tty;
- struct device *tty_dev;
- int may_wake = 0;
-
- /* Get the tty which could be NULL so don't assume it's valid */
- tty = tty_port_tty_get(&port->state->port);
- if (tty) {
- tty_dev = tty->dev;
- may_wake = device_may_wakeup(tty_dev);
- tty_kref_put(tty);
- }
-
- /*
- * Call the API provided in serial_core.c file which handles
- * the suspend.
- */
- uart_suspend_port(&xuartps_uart_driver, port);
- if (console_suspend_enabled && !may_wake) {
- struct xuartps *xuartps = port->private_data;
-
- clk_disable(xuartps->refclk);
- clk_disable(xuartps->aperclk);
- } else {
- unsigned long flags = 0;
-
- spin_lock_irqsave(&port->lock, flags);
- /* Empty the receive FIFO 1st before making changes */
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY))
- xuartps_readl(XUARTPS_FIFO_OFFSET);
- /* set RX trigger level to 1 */
- xuartps_writel(1, XUARTPS_RXWM_OFFSET);
- /* disable RX timeout interrups */
- xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IDR_OFFSET);
- spin_unlock_irqrestore(&port->lock, flags);
- }
-
- return 0;
-}
-
-/**
- * xuartps_resume - Resume after a previous suspend
- * @device: Pointer to the device structure
- *
- * Return: 0
- */
-static int xuartps_resume(struct device *device)
-{
- struct uart_port *port = dev_get_drvdata(device);
- unsigned long flags = 0;
- u32 ctrl_reg;
- struct tty_struct *tty;
- struct device *tty_dev;
- int may_wake = 0;
-
- /* Get the tty which could be NULL so don't assume it's valid */
- tty = tty_port_tty_get(&port->state->port);
- if (tty) {
- tty_dev = tty->dev;
- may_wake = device_may_wakeup(tty_dev);
- tty_kref_put(tty);
- }
-
- if (console_suspend_enabled && !may_wake) {
- struct xuartps *xuartps = port->private_data;
-
- clk_enable(xuartps->aperclk);
- clk_enable(xuartps->refclk);
-
- spin_lock_irqsave(&port->lock, flags);
-
- /* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
- while (xuartps_readl(XUARTPS_CR_OFFSET) &
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
- cpu_relax();
-
- /* restore rx timeout value */
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
- /* Enable Tx/Rx */
- ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
- (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
-
- spin_unlock_irqrestore(&port->lock, flags);
- } else {
- spin_lock_irqsave(&port->lock, flags);
- /* restore original rx trigger level */
- xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
- /* enable RX timeout interrupt */
- xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
- spin_unlock_irqrestore(&port->lock, flags);
- }
-
- return uart_resume_port(&xuartps_uart_driver, port);
-}
-#endif /* ! CONFIG_PM_SLEEP */
-
-static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
-
-/**
- * xuartps_probe - Platform driver probe
- * @pdev: Pointer to the platform device structure
- *
- * Return: 0 on success, negative error otherwise.
- */
-static int xuartps_probe(struct platform_device *pdev)
-{
- int rc;
- struct uart_port *port;
- struct resource *res, *res2;
- struct xuartps *xuartps_data;
-
- xuartps_data = devm_kzalloc(&pdev->dev, sizeof(*xuartps_data),
- GFP_KERNEL);
- if (!xuartps_data)
- return -ENOMEM;
-
- xuartps_data->aperclk = devm_clk_get(&pdev->dev, "aper_clk");
- if (IS_ERR(xuartps_data->aperclk)) {
- dev_err(&pdev->dev, "aper_clk clock not found.\n");
- return PTR_ERR(xuartps_data->aperclk);
- }
- xuartps_data->refclk = devm_clk_get(&pdev->dev, "ref_clk");
- if (IS_ERR(xuartps_data->refclk)) {
- dev_err(&pdev->dev, "ref_clk clock not found.\n");
- return PTR_ERR(xuartps_data->refclk);
- }
-
- rc = clk_prepare_enable(xuartps_data->aperclk);
- if (rc) {
- dev_err(&pdev->dev, "Unable to enable APER clock.\n");
- return rc;
- }
- rc = clk_prepare_enable(xuartps_data->refclk);
- if (rc) {
- dev_err(&pdev->dev, "Unable to enable device clock.\n");
- goto err_out_clk_dis_aper;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- rc = -ENODEV;
- goto err_out_clk_disable;
- }
-
- res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res2) {
- rc = -ENODEV;
- goto err_out_clk_disable;
- }
-
-#ifdef CONFIG_COMMON_CLK
- xuartps_data->clk_rate_change_nb.notifier_call =
- xuartps_clk_notifier_cb;
- if (clk_notifier_register(xuartps_data->refclk,
- &xuartps_data->clk_rate_change_nb))
- dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
-#endif
-
- /* Initialize the port structure */
- port = xuartps_get_port();
-
- if (!port) {
- dev_err(&pdev->dev, "Cannot get uart_port structure\n");
- rc = -ENODEV;
- goto err_out_notif_unreg;
- } else {
- /* Register the port.
- * This function also registers this device with the tty layer
- * and triggers invocation of the config_port() entry point.
- */
- port->mapbase = res->start;
- port->irq = res2->start;
- port->dev = &pdev->dev;
- port->uartclk = clk_get_rate(xuartps_data->refclk);
- port->private_data = xuartps_data;
- xuartps_data->port = port;
- platform_set_drvdata(pdev, port);
- rc = uart_add_one_port(&xuartps_uart_driver, port);
- if (rc) {
- dev_err(&pdev->dev,
- "uart_add_one_port() failed; err=%i\n", rc);
- goto err_out_notif_unreg;
- }
- return 0;
- }
-
-err_out_notif_unreg:
-#ifdef CONFIG_COMMON_CLK
- clk_notifier_unregister(xuartps_data->refclk,
- &xuartps_data->clk_rate_change_nb);
-#endif
-err_out_clk_disable:
- clk_disable_unprepare(xuartps_data->refclk);
-err_out_clk_dis_aper:
- clk_disable_unprepare(xuartps_data->aperclk);
-
- return rc;
-}
-
-/**
- * xuartps_remove - called when the platform driver is unregistered
- * @pdev: Pointer to the platform device structure
- *
- * Return: 0 on success, negative error otherwise.
- */
-static int xuartps_remove(struct platform_device *pdev)
-{
- struct uart_port *port = platform_get_drvdata(pdev);
- struct xuartps *xuartps_data = port->private_data;
- int rc;
-
- /* Remove the xuartps port from the serial core */
-#ifdef CONFIG_COMMON_CLK
- clk_notifier_unregister(xuartps_data->refclk,
- &xuartps_data->clk_rate_change_nb);
-#endif
- rc = uart_remove_one_port(&xuartps_uart_driver, port);
- port->mapbase = 0;
- clk_disable_unprepare(xuartps_data->refclk);
- clk_disable_unprepare(xuartps_data->aperclk);
- return rc;
-}
-
-/* Match table for of_platform binding */
-static struct of_device_id xuartps_of_match[] = {
- { .compatible = "xlnx,xuartps", },
- {}
-};
-MODULE_DEVICE_TABLE(of, xuartps_of_match);
-
-static struct platform_driver xuartps_platform_driver = {
- .probe = xuartps_probe,
- .remove = xuartps_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = XUARTPS_NAME,
- .of_match_table = xuartps_of_match,
- .pm = &xuartps_dev_pm_ops,
- },
-};
-
-static int __init xuartps_init(void)
-{
- int retval = 0;
-
- /* Register the xuartps driver with the serial core */
- retval = uart_register_driver(&xuartps_uart_driver);
- if (retval)
- return retval;
-
- /* Register the platform driver */
- retval = platform_driver_register(&xuartps_platform_driver);
- if (retval)
- uart_unregister_driver(&xuartps_uart_driver);
-
- return retval;
-}
-
-static void __exit xuartps_exit(void)
-{
- /* Unregister the platform driver */
- platform_driver_unregister(&xuartps_platform_driver);
-
- /* Unregister the xuartps driver */
- uart_unregister_driver(&xuartps_uart_driver);
-}
-
-module_init(xuartps_init);
-module_exit(xuartps_exit);
-
-MODULE_DESCRIPTION("Driver for PS UART");
-MODULE_AUTHOR("Xilinx Inc.");
-MODULE_LICENSE("GPL");
@@ -211,8 +211,8 @@
/* VIA VT8500 SoC */
#define PORT_VT8500 97
-/* Xilinx PSS UART */
-#define PORT_XUARTPS 98
+/* Cadence UART */
+#define PORT_CDNS_UART 98
/* Atheros AR933X SoC */
#define PORT_AR933X 99