From patchwork Wed Mar 19 06:08:13 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Javier Martinez Canillas X-Patchwork-Id: 3850151 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 0726CBF540 for ; Wed, 19 Mar 2014 06:10:28 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id A9F9C2037D for ; Wed, 19 Mar 2014 06:10:26 +0000 (UTC) Received: from casper.infradead.org (casper.infradead.org [85.118.1.10]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 0BFE1202A1 for ; Wed, 19 Mar 2014 06:10:25 +0000 (UTC) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WQ9h3-0004Ci-CZ; Wed, 19 Mar 2014 06:09:37 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1WQ9gt-0008Rr-CE; Wed, 19 Mar 2014 06:09:27 +0000 Received: from bhuna.collabora.co.uk ([93.93.135.160]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WQ9gc-0008N8-PE for linux-arm-kernel@lists.infradead.org; Wed, 19 Mar 2014 06:09:12 +0000 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: javier) with ESMTPSA id 4B25E600546 From: Javier Martinez Canillas To: Tony Lindgren Subject: [RESEND PATCH 1/3] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support Date: Wed, 19 Mar 2014 07:08:13 +0100 Message-Id: <1395209295-24399-2-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 1.9.0 In-Reply-To: <1395209295-24399-1-git-send-email-javier.martinez@collabora.co.uk> References: <1395209295-24399-1-git-send-email-javier.martinez@collabora.co.uk> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20140319_020911_061477_A5AD2CA9 X-CRM114-Status: GOOD ( 25.16 ) X-Spam-Score: -1.9 (-) Cc: linux-omap@vger.kernel.org, Russell King , linux-arm-kernel@lists.infradead.org, =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Javier Martinez Canillas X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.2 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP When connecting an ethernet chip to the GPMC, such as smc91x or smsc911x, a GPIO has to be requested to be used as an IRQ and also the IO memory for a GPMC chip-select. When booting with DT the chip-select allocation is handled in a generic manner in the GPMC driver and the GPIO to IRQ mapping is made by the DT core so this code is not needed anymore now that mach-omap2 related boards are DT-only. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile | 5 - arch/arm/mach-omap2/gpmc-smc91x.c | 186 ------------------------------------ arch/arm/mach-omap2/gpmc-smc91x.h | 42 -------- arch/arm/mach-omap2/gpmc-smsc911x.c | 100 ------------------- arch/arm/mach-omap2/gpmc-smsc911x.h | 35 ------- 5 files changed, 368 deletions(-) delete mode 100644 arch/arm/mach-omap2/gpmc-smc91x.c delete mode 100644 arch/arm/mach-omap2/gpmc-smc91x.h delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.c delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.h diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index e6eec6f..103f1e8 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -283,11 +283,6 @@ obj-y += $(onenand-m) $(onenand-y) nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o obj-y += $(nand-m) $(nand-y) -smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o -obj-y += $(smc91x-m) $(smc91x-y) - -smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o -obj-y += $(smsc911x-m) $(smsc911x-y) ifneq ($(CONFIG_HWSPINLOCK_OMAP),) obj-y += hwspinlock.o endif diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c deleted file mode 100644 index 61a0635..0000000 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-smc91x.c - * - * Copyright (C) 2009 Nokia Corporation - * Contact: Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "gpmc.h" -#include "gpmc-smc91x.h" - -#include "soc.h" - -static struct omap_smc91x_platform_data *gpmc_cfg; - -static struct resource gpmc_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct platform_device gpmc_smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &gpmc_smc91x_info, - }, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, -}; - -static struct gpmc_settings smc91x_settings = { - .device_width = GPMC_DEVWIDTH_16BIT, -}; - -/* - * Set the gpmc timings for smc91c96. The timings are taken - * from the data sheet available at: - * http://www.smsc.com/main/catalog/lan91c96.html - * REVISIT: Level shifters can add at least to the access latency. - */ -static int smc91c96_gpmc_retime(void) -{ - struct gpmc_timings t; - struct gpmc_device_timings dev_t; - const int t3 = 10; /* Figure 12.2 read and 12.4 write */ - const int t4_r = 20; /* Figure 12.2 read */ - const int t4_w = 5; /* Figure 12.4 write */ - const int t5 = 25; /* Figure 12.2 read */ - const int t6 = 15; /* Figure 12.2 read */ - const int t7 = 5; /* Figure 12.4 write */ - const int t8 = 5; /* Figure 12.4 write */ - const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - - /* - * FIXME: Calculate the address and data bus muxed timings. - * Note that at least adv_rd_off needs to be changed according - * to omap3430 TRM Figure 11-11. Are the sdp boards using the - * FPGA in between smc91x and omap as the timings are different - * from above? - */ - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - return 0; - - memset(&dev_t, 0, sizeof(dev_t)); - - dev_t.t_oeasu = t3 * 1000; - dev_t.t_oe = t5 * 1000; - dev_t.t_cez_r = t4_r * 1000; - dev_t.t_oez = t6 * 1000; - dev_t.t_rd_cycle = (t20 - t3) * 1000; - - dev_t.t_weasu = t3 * 1000; - dev_t.t_wpl = t7 * 1000; - dev_t.t_wph = t8 * 1000; - dev_t.t_cez_w = t4_w * 1000; - dev_t.t_wr_cycle = (t20 - t3) * 1000; - - gpmc_calc_timings(&t, &smc91x_settings, &dev_t); - - return gpmc_cs_set_timings(gpmc_cfg->cs, &t); -} - -/* - * Initialize smc91x device connected to the GPMC. Note that we - * assume that pin multiplexing is done in the board-*.c file, - * or in the bootloader. - */ -void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) -{ - unsigned long cs_mem_base; - int ret; - - gpmc_cfg = board_data; - - if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) - gpmc_cfg->retime = smc91c96_gpmc_retime; - - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; - gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; - gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); - - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - smc91x_settings.mux_add_data = GPMC_MUX_AD; - if (gpmc_cfg->flags & GPMC_READ_MON) - smc91x_settings.wait_on_read = true; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - smc91x_settings.wait_on_write = true; - if (gpmc_cfg->wait_pin) - smc91x_settings.wait_pin = gpmc_cfg->wait_pin; - ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); - if (ret < 0) - goto free1; - - if (gpmc_cfg->retime) { - ret = gpmc_cfg->retime(); - if (ret != 0) - goto free1; - } - - if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) - goto free1; - - gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - - if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, - GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); - if (ret) - goto free2; - } - - if (gpmc_cfg->gpio_reset) { - ret = gpio_request_one(gpmc_cfg->gpio_reset, - GPIOF_OUT_INIT_LOW, "SMC91X reset"); - if (ret) - goto free3; - - gpio_set_value(gpmc_cfg->gpio_reset, 1); - msleep(100); - gpio_set_value(gpmc_cfg->gpio_reset, 0); - } - - if (platform_device_register(&gpmc_smc91x_device) < 0) { - printk(KERN_ERR "Unable to register smc91x device\n"); - gpio_free(gpmc_cfg->gpio_reset); - goto free3; - } - - return; - -free3: - if (gpmc_cfg->gpio_pwrdwn) - gpio_free(gpmc_cfg->gpio_pwrdwn); -free2: - gpio_free(gpmc_cfg->gpio_irq); -free1: - gpmc_cs_free(gpmc_cfg->cs); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.h b/arch/arm/mach-omap2/gpmc-smc91x.h deleted file mode 100644 index b64fbee..0000000 --- a/arch/arm/mach-omap2/gpmc-smc91x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpmc-smc91x.h - * - * Copyright (C) 2009 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__ - -#define GPMC_TIMINGS_SMC91C96 (1 << 4) -#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */ -#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */ -#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */ - -struct omap_smc91x_platform_data { - int cs; - int gpio_irq; - int gpio_pwrdwn; - int gpio_reset; - int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */ - u32 flags; - int (*retime)(void); -}; - -#if defined(CONFIG_SMC91X) || \ - defined(CONFIG_SMC91X_MODULE) - -extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d); - -#else - -#define board_smc91x_data NULL - -static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d) -{ -} - -#endif -#endif diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c deleted file mode 100644 index 2757504..0000000 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-smsc911x.c - * - * Copyright (C) 2009 Li-Pro.Net - * Stephan Linz - * - * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include -#include -#include -#include -#include -#include -#include - -#include "gpmc.h" -#include "gpmc-smsc911x.h" - -static struct resource gpmc_smsc911x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config gpmc_smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, -}; - -/* - * Initialize smsc911x device connected to the GPMC. Note that we - * assume that pin multiplexing is done in the board-*.c file, - * or in the bootloader. - */ -void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg) -{ - struct platform_device *pdev; - unsigned long cs_mem_base; - int ret; - - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - pr_err("Failed to request GPMC mem region\n"); - return; - } - - gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; - gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) { - pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); - goto free1; - } - - gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - - if (gpio_is_valid(gpmc_cfg->gpio_reset)) { - ret = gpio_request_one(gpmc_cfg->gpio_reset, - GPIOF_OUT_INIT_HIGH, "smsc911x reset"); - if (ret) { - pr_err("Failed to request reset GPIO%d\n", - gpmc_cfg->gpio_reset); - goto free2; - } - - gpio_set_value(gpmc_cfg->gpio_reset, 0); - msleep(100); - gpio_set_value(gpmc_cfg->gpio_reset, 1); - } - - gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT; - - pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, - gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), - &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config)); - if (IS_ERR(pdev)) { - pr_err("Unable to register platform device\n"); - gpio_free(gpmc_cfg->gpio_reset); - goto free2; - } - - return; - -free2: - gpio_free(gpmc_cfg->gpio_irq); -free1: - gpmc_cs_free(gpmc_cfg->cs); - - pr_err("Could not initialize smsc911x device\n"); -} diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h deleted file mode 100644 index ea6c9c8..0000000 --- a/arch/arm/mach-omap2/gpmc-smsc911x.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h - * - * Copyright (C) 2009 Li-Pro.Net - * Stephan Linz - * - * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ - -struct omap_smsc911x_platform_data { - int id; - int cs; - int gpio_irq; - int gpio_reset; - u32 flags; -}; - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) - -extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); - -#else - -static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d) -{ -} - -#endif -#endif